Luxul AGS-1024 Manuale utente

Simply Connected

Quick Install Guide

AGS-1024

24-Port Gigabit Switch

Use the AGS-1024 to:

Add 24 Gigabit Ports to Your AV Rack Solutions

Future Proof Your Network with Gigabit Speeds (10X

Performance of Fast Ethernet)

Set-up a Dedicated Network for Optimizing VoIP, Video,

Security, or Gaming Applications

Quick Install Guide

AGS-1024

a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450

LUX-QIG-AGS-1024 029151024

Quick Install Guide

Model Number: AGS-1024

24-Port Gigabit Switch

No part of this publication may be modiﬁed or adapted in any way, for any

purposes without permission in writing from Luxul. The material in this manual

is subject to change without notice. Luxul reserves the right to make changes to

any product to improve reliability, function, or design. No license is granted, either

expressly or by implication or otherwise under any Luxul intellectual property rights.

An implied license only exists for equipment, circuits and subsystems contained in

this or any Luxul product.

DOCUMENT CONVENTIONS

The following graphical alerts are used in this document to indicate notable situations:

NOTE: Tips, hints, or special requirements that you should take note of.

CAUTION: Care is required. Disregarding a caution can result in data

loss or equipment malfunction.

WARNING!: Indicates a condition or procedure that could result in

personal injury or equipment damage.

FCC COMPLIANCE

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

CONTACT LUXUL

Sales

P: 801-822-5450

E: [email protected]

Technical Support

P: 801-822-5450

E: suppor[email protected]

Simply Connected

Other trademarks and registered trademarks are the property of their respective owners 3

PACKAGE CONTENTS

Please check the contents carefully after you open the packing:

 One AGS-1024 24-Port Gigabit switch

Power Cord

Rack Mount Brackets and Screws

Four Rubber Foot Pads

Quick Installation Guide

If any of the listed items are missing or damaged, please contact the reseller from

whom you purchased the AGS-1024 for return/replacement.

HARDWARE DESCRIPTION

Front Panel

The front panel of the AGS-1024 Switch includes 24 (1 for each port) dual colored

Link/Activity LEDs that can be switched from green to blue. In addition, the front

panel has a single Power LED.

AGS-1024 Front Panel View

Rear Panel Layout

The rear panel of the AGS-1024 Switch includes 24 10/100/1000Mbps RJ45 ports.

Each port has one Link/Activity LED.

AGS-1024 Rear Panel View

Quick Install Guide

AGS-1024

a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450

LUX-QIG-AGS-1024 029151024

LED Indicators

The front panel LEDs of the AGS-1024 include 1 Power indicator and 24 numbered

Link/Activity indicators. These LEDs show the operating status of the AGS-1024

and each switch connection.

LED Indicators

The following chart shows the LED indicators of the AGS-1024 along with an

explanation of the indicator’s properties:

LED Status Description

Front

Power On This LED indicates that there is power to the AGS-1024.

Off If this indicator is not lit, please check the AC power

cord to ensure proper connection to the outlet and the

AGS-1024.

Link/Activity On Indicates a device is connected to the port of the

AGS-1024.

Flashing The Link/Activity LED ﬂ ashes when a port is receiving or

transmitting data

Off Indicates the port is not connected to a device.

Back

Speed/Link/

Act

Green The Link/Activity LED of the port will be on if there is a

1000Mbps device connected to the port

Amber The Link/Activity LED of the port will be on if there is a

10/100Mbps device connected to the port

Flashing The Link/Activity LED ﬂ ashes when a port is receiving

or transmitting data

Off There is nothing connected to the port

Simply Connected

Other trademarks and registered trademarks are the property of their respective owners 5

CAUTION: Please use the correct power cord for your environment. If

any voltage other than 100/240 is applied, it will result in

damage to the AGS-1024.

PREPARING FOR INSTALLATION

System Requirements

Network Connections: Ethernet Enabled Computer

Web Browsers: Internet Explorer 6.0 or higher, Mozilla 1.0 or higher, Safari 1.0

or higher

Internet: Broadband Internet Service (depending on the service provider, a

separate modem may be required)

Before Connecting to the Network

The AGS-1024 can be rack-mounted or used as a desktop switch. Before connecting

to the network, please be aware of the following requirements:

Install the AGS-1024 in a stable/safe place to avoid any possible damage

 Make sure there is adequate space around the AGS-1024 for adequate ventilation

and proper heat dissipation.

 Do not place heavy articles on the AGS-1024.

 Power outlets should be within 5 feet of the AGS-1024.

 Check the power cord to conﬁ rm a secure connection.

Ensure there is sufﬁ cient space around the AGS-1024 for proper ventilation and

heat dissipation. It is recommended to have at least 4-6 inches around all sides.

 When installing the AGS-1024 on a surface, attach the rubber feet to the bottom

of the device to avoid scratching the surface.

Quick Install Guide

AGS-1024

a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450

LUX-QIG-AGS-1024 029151024

AGS-1024 INSTALLATION

Installing the AGS-1024 in a Rack

The AGS-1024 can easily be installed in a standard 19” rack. The AGS-1024 includes two

mounting ears for installing and stabilizing the switch. When attaching the mounting

ears and installing the switch within a rack, please refer to the following illustration:

Rack-Mounting the AGS-1024

 Using the included screws, attach the mounting ears to each side of the switch.

 Mount the switch in the rack with the LEDs facing outwards. Be sure the switch is

level and properly secured within the rack.

Desktop Setup

For use as a desktop device, position and apply the included rubber feet to the

bottom of the AGS-1024.

Attaching the Rubber Feet to the AGS-1024

Connecting Devices

Use standard Ethernet CAT5, CAT5e, or CAT6 cable to connect the AGS-1024 to

a device as described below (CAT6 must be used in order to achieve full Gigabit

bandwidth). The AGS-1024 will automatically adjust to the characteristics (speed/

duplex) of the device to which it is connected.

Simply Connected

Other trademarks and registered trademarks are the property of their respective owners 7

Connecting the AGS-1024 to a Device

When a device is properly connected, the Link/Activity LED for each port

lights up. Please refer to the LED Indicators section for indicator deﬁ nitions and

troubleshooting.

Connecting to a Router or Other Switch

Connecting the AGS-1024 to Router or Switch

When a device is properly connected, the Link/Activity LED for each port

lights up. Please refer to the LED Indicators section for indicator deﬁ nitions and

troubleshooting.

Information on this document supersedes all previous versions. Products and documents

subject to change without notice. Products may be discontinued without notice.

LUX-QIG-AGS-1024-v1

029151024

a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685

luxul.com | 801-822-5450

FCC Statement:

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause harmful interfer-

ence to radio communications. Operation of this equipment in a residential area is likely to

cause harmful interference in which case the user will be required to correct the interference

at his own expense.

FCC Caution: Any changes or modiﬁcations not expressly approved by the party responsible

for compliance could void the user’s authority to operate this equipment.

This device complies with part 15 of the FCC Rules.

Hereby, Luxul, 14203 Minuteman Drive, Suite 201, Draper, Utah, 84020, declares that

this Luxul AGS-1024 is in compliance with the essential requirements and other

relevant provisions of Directive 1999/5/EC.

For a copy of this report send a self addressed stamped envelope to:

Luxul CE, 14203 Minuteman Drive, Suite 201, Draper, Utah, 84020.

Industry Canada

CAN ICES-3(A)/NMB-3(A)

Indice

Altri manuali Luxul Interruttore

Luxul

Luxul XMS-7048P Manuale utente

Luxul

Luxul XMS-1024P Manuale utente

Luxul

Luxul XMS-1010P-E Manuale utente

Luxul

Luxul Xen XGS-1008 Manuale utente

Luxul

Luxul AGS-1008M Manuale utente

Luxul

Luxul XMS-1024P Manuale utente

Luxul

Luxul AGS-1024 Manuale utente

Luxul

Luxul AMS-1208P Manuale utente

Luxul

Luxul AMS-2616P Manuale utente

Luxul

Luxul AMS-2600 Manuale utente

Luxul

Luxul Xen XGS-1008 Manuale utente

Luxul

Luxul AGS-1016 Manuale utente

Luxul

Luxul XGS-1024S Manuale utente

Luxul

Luxul XMS-2624P Manuale utente

Luxul

Luxul XFS-1084P Manuale utente

Luxul

Luxul AMS-1208P Manuale utente

Luxul

Luxul XFS-1816P Manuale utente

Luxul

Luxul Xen XGS-1008 Manuale utente

Luxul

Luxul SW-510-48P-F Manuale utente

Luxul

Luxul XGS-1005 Manuale utente

Luxul

Luxul AMS-4424P Manuale utente

Luxul

Luxul SW-610-24P-R-A Manuale utente

Luxul

Luxul XGS-1024 Manuale utente

Luxul

Luxul XGS-1024 Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente