MacDon FD75 Manuale utente

The harvesting specialists worldwide.

FD75

FlexDraper®Combine Header

Operator’s Manual

169595 Rev. D

Original Instruction

epcatalogs.com

FD75 FlexDraper®FlexDraper®Header for Combines

Published: October, 2013

epcatalogs.com

Declaration ofConformity

169595 iRev. D

epcatalogs.com

Introduction

This instructional manual contains information on the FD75 FlexDraper®and the CA25 Combine Adapter. It must

be used in conjunction with your combine operator's manual.

TheFD75FlexDraper

®is specially designed as a “straight cut” header and is equipped to work well in all straight

cut conditions, whether cutting on or above the ground, using a three-piece ﬂexible frame to closely follow ground

contours.

CAREFULLY READ ALL THE MATERIAL PROVIDED BEFORE ATTEMPTING TO UNLOAD, ASSEMBLE, OR USE

THE MACHINE.

Use this manual as your ﬁrst source of information about the machine. If you follow the instructions given here,

your header will work well for many years. If you require more detailed service information, a technical manual is

available from your MacDon Dealer.

The Table of Contents and Index will guide you to speciﬁc areas of this manual. Study the Table of Contents to

familiarize yourself with how the information is organized.

Keep this manual handy for frequent reference and to pass

on to new Operators or Owners. A storage case for this

manual is located inside the header left endshield.

Call your MacDon Dealer if you need assistance,

information, or additional copies of this manual.

Figure 1: Manual storage location

169595 iiRev. D

epcatalogs.com

Model and Serial Number

Record the model number, serial number, and model year of the header, combine adapter, and Slow Speed

Transport/Stabilizer Wheel option (if installed) on the lines below.

NOTE: Right Hand (RH) and Left Hand (LH) designations are determined from the operator’s position,

facing forward.

Draper Header

Header Model:

Serial Number:

Year:

In shipping conﬁguration, the serial number plate

is located beside the knife drive motor on the left

hand endsheet.

Figure 2: Header serial number location

Combine Adapter

Adapter Model:

Serial Number:

Year:

The serial number plate is located on the underside of

the reservoir at the right end.

Figure 3: Adapter serial number location

Slow Speed Transport/Stabilizer Wheel Option

Serial Number:

Year:

The serial number plate is located on the right hand

axle assembly.

Figure 4: Slow Speed Transport/Stabilizer

Wheel Option serial number location

169595 iii Rev. D

epcatalogs.com

Buy now

MacDon FD75 FlexDraper Combine Header Operators Manual PDF

With Instant Download

Altri manuali per FD75

Indice

Altri manuali MacDon Attrezzature agricole

Manuali Attrezzature agricole popolari di altre marche

GSi

GSi PNEG-2314 Manuale utente

Checchi & Magli

Checchi & Magli TEXDRIVE Manuale utente

Amazone

Amazone Cenius 4003-2TX Manuale utente

MASSEY FERGUSON

MASSEY FERGUSON MF 9313S Manuale utente

Cima

Cima BLITZ Istruzioni operative e di manutenzione

Amazone

Amazone CombiDisc 3000 Istruzioni per l'installazione

HE-VA

HE-VA Disc-Roller XL Contour Manuale utente

AGT

AGT AGT-SSFM Manuale utente

Milestone

Milestone 72-84 Manuale utente

KUHN

KUHN Hector 3000 Manuale utente

Krone

Krone X-Disc 6200 Manuale utente

Eliet

Eliet DZC450 Manuale utente

Taarup

Taarup BIO+ B4000 Manuale utente

Garland

Garland SHAKER 310 DPG Manuale utente

stable comfort

stable comfort StableWall System Manuale utente

Raven

Raven AccuBoom Manuale utente

International

International 710 Manuale utente

Ashland

Ashland HDW-3217-14 Manuale utente