Magewell XI104XUSB Manuale utente

XI104XUSB

HD+ Quad A/V USB3.0 Capture Box

User’s Guide

Rev 1.0

2012/9/10

http://www.magewell.com

Content

1. Preface....................................................................................................................................................... 4

2Minimum Hardware Configuration ........................................................................................................... 4

3. Recommended Hardware Configuration................................................................................................... 4

4. Software Requirement .............................................................................................................................. 4

5. Hardware and Driver Installation .............................................................................................................. 4

6. Connection of HD Input............................................................................................................................. 5

a) DVI-D/DVI-I signals .......................................................................................................................... 5

b) HDMI signals .................................................................................................................................. 5

c) VGA signals (RGB-HV) ..................................................................................................................... 6

d) Component signal (YPbPr).......................................................................................................... 6

e) CVBS ..................................................................................................................................................... 6

7. Connection of SD Input ...................................................................................................................... 7

8. Audio Connection................................................................................................................................. 7

9. Video Capture Devices Instruction .................................................................................................. 7

b) Instruction of “Properties”...................................................................................................... 9

c) Instructions for Advanced Settings of HD capture device .................................................. 10

i. Input Signals..................................................................................................................................... 10

1. Input Interface.................................................................................................................................. 10

2. Signal Status..................................................................................................................................... 11

ii. Image Adjustment .......................................................................................................................... 11

iii. Image Output............................................................................................................................... 12

d) SD Capture Device” Advanced Video Settings” Instruction ........................................... 13

e) Instruction of “Color Adjustment” ......................................................................................... 14

10. Settings for Video Format ............................................................................................................ 14

b) Instruction of “Video Formats” ........................................................................................... 15

http://www.magewell.com

a) Windows XP, Windows 2003 ....................................................................................................... 15

b) Windows Vista, Windows 7, Windows 2008, Windows 2008 R2.................................... 16

12. Software Compatibility.................................................................................................................. 17

13. Important Notice............................................................................................................................. 18

http://www.magewell.com

1. Preface

Thank you for choosing XI104XUSB easy-to-carry USB 3.0 HD/SD video capture box!

XI104XUSB USB3.0 capture box has a small size and is easy to carry. It can simultaneously

capture 1 HD video signal and quad SD video signals and dual analog stereo audio signal.

The HD input can connect HDMI, DVI, YPbPr, VGA (RGB-HV) and composite (CVBS) signals.

This user guide provides you with necessary instruction when you use XI104XUSB capture

box.

2Minimum Hardware Configuration

Intel Core Solo

1G RAM

Available USB 3.0 interface

3. Recommended Hardware Configuration

Intel Core i5

2G RAM

Available USB 3.0 interface

4. Software Requirement

System should be one of the following systems (x 86 version or x64 version):

Microsoft Windows XP

Microsoft Windows Server 2003

Microsoft Windows Vista

Microsoft Windows Server 2008

Microsoft Windows 7

Microsoft Windows Server 2008 R2

5. Hardware and Driver Installation

Please refer to "XI104XUSB Installation Guide" to install the hardware and the driver.

http://www.magewell.com

6. Connection of HD Input

a) DVI-D/DVI-I signals

Figure 1 DVI connection

b) HDMI signals

Figure 2 HDMI connection

http://www.magewell.com

c) VGA signals (RGB-HV)

Figure 3 VGA connection

d) Component signal (YPbPr)

Figure 4 Component connection

e) CVBS

Figure 5 CVBS connection

http://www.magewell.com

7. Connection of SD Input

Figure 6 SD CVBS connection

8. Audio Connection

Figure 7，Audio Input Connection

Note: The audio signal input is up to" Line in" level standard, if you need to connect microphone,

must connect microphone with microphone input of "microphone amplifier" or "mixer" , and then

"microphone amplifier" or " mixer "output is connected to the interface.

9. Video Capture Devices Instruction

XI104XUSB is based on Microsoft DirectShow interface, and after the installation, 5 video

http://www.magewell.com

devices will be added in the operating system:

HD Video (XI104XUSB Adapter x) HD capture device

Video 1 (XI104XUSB Adapter x) SD capture device

Video 2 (XI104XUSB Adapter x) SD capture device

Video 3 (XI104XUSB Adapter x) SD capture device

Video 4 (XI104XUSB Adapter x) SD capture device

The HD Video (XI104XUSB Adapter x) is corresponding to DVI-I input interface; Video 1 / 2

/3/4 (XI104XUSB Adapter x) is corresponding to four yellow video BNC interface in SD

breakout cable. The breakout cable will connect to the “Quad A/V”interface on the

capture box.

XI104XUSB not only offer basic options, such as image brightness, contrast, hue, saturation,

Gamma and so on, but also provide additional options for setting function. You can use

"Filter Properties dialog window" in DirectShow to set options.

a) Display "Filter Properties Dialog Window" In Common Software

AMCAP: Double click "AmCap.exe", choose HD video device "HD Video (XI104XUSB

Adapter1)" in "Devices" menu, then click "Video Capture Filter ..." in "Options" menu,

pop-up "Filter Properties dialog window".

http://www.magewell.com

b) Instruction of “Properties”

Figure 8 Properties

Device Number: display the serial number of the capture box, and the number shall be

the same as the bar code on the capture box.

Version: display the version number. The version includes hardware version, firmware

version, driver version and device serial number. When solving your problems, you

need to provide the version number.

Firmware: if the firmware needs upgrades, we can first backup the firmware and then

upgrade it.

Note: Firmware cannot be mixed for different hardware. If the firmware is wrong, the

update will have errors. Meanwhile, please ensure the power during the upgrade or it will

lead to failed upgrade and USB 3.0 capture box may not be able to work and have to be

http://www.magewell.com

returned to repair.

c) Instructions for Advanced Settings of HD capture device

Figure 9 Advanced Settings

i. Input Signals

1. Input Interface

By default, check “Auto Select Input Interface”, supporting input interface includes:

DVI / HDMI input, VGA input, YPbPr input, CVBS input.

Notes: when “Auto Select Input Interface” is selected, if HDMI and YPbPr input

interfaces both have signal access, then HDMI input is preferred. You must select CVBS

Indice

Altri manuali Magewell Registratore digitale

Magewell

Magewell USB Fusion Manuale utente

Manuali Registratore digitale popolari di altre marche

FLIR

FLIR M3100E Series Manuale utente

VTRACKPRO

VTRACKPRO FPRO300 Manuale utente

Swann

Swann NVR-7085 models Manuale utente

XtendLan

XtendLan DVR-1670C Manuale utente

urmet domus

urmet domus 1093/004AHD Manuale utente

Holux

Holux M1 Manuale utente

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Manuale utente

Whistler

Whistler D16VRS Manuale utente

Defender Security

Defender Security 82-20235 Manuale utente

MISUMI

MISUMI MP-WF100M Manuale utente

Speco

Speco D8HU Manuale utente

UST

UST DDR-E04AA Istruzioni per l’uso

Consolidated

Consolidated Digital Video Recorder Manuale utente

Mace

Mace DVR0404RW Guida rapida

RCA

RCA RTD315W Manuale utente

FSM

FSM Colibri Grande PRO Manuale utente

Hauppauge

Hauppauge HD PVR 2 Manuale utente

Identivision

Identivision ICR-PH161i PIONEER Manuale utente