Magnavox MP601 Manuale utente

1. Do not look directly into the projector light.

2. Don’t touch the projector lens.

3. Use of this unit near fluorescent lighting may cause interference regarding

use of the remote. If the unit is displaying erratic behavior move away from

any fluorescent lighting, as it may be the cause.

Remove & Close The Lens Cover

Placing Your Projector

Your projector can be installed in four different configurations (see picture below):

Remove the lens

cover before using

Fig. 1 Fig. 2 Fig. 3 Fig. 4

Assemble the supplied

lens hood to the unit

as illustrated below:

When finished, remove

the lens hood from

the unit:

Close the lens cover

when unit not in use

Front Ceiling

Rear Ceiling

Rear Table

Front Table Front Table:

Select this location with the projector placed near

the floor in front of the screen. This is the most

common way to position the projector for quick

setup and portability.

Rear Table:

Select this location with the projector placed near

the floor behind the screen.

NOTE: A special rear projection screen is required.

Front Ceiling:

Select this location with the projector suspended

upside-down from the ceiling in front of the screen.

NOTE: A projector mount is required to install the

projector on a ceiling.

Rear Ceiling:

Select this location with the projector suspended

upside-down from the ceiling behind the screen.

NOTE: A projector mount is required to install the

projector in a ceiling.

A special rear projection screen is required.

LENS COVER

REMOVE

LENS COVER

REMOVE

Distance Between The Projector And Screen

Measure the distance between the projector and where you want to position

the screen. This is the projection distance.

Installing your Projector in the Ceiling

SCREEN SIZE

DISTANCE

Distance Screen Size

37 inch

45.7 inch

53.1 inch

59.4 inch

71.2 inch

84.6 inch

45 inch

50 inch

60 inch

72 inch

• Move the projector as close to the center of

the screen as possible.

• The light beam from the projector should be

perpendicular to the screen for a rectangular

or square image.

When installing the projector in the ceiling, please purchase a projector mount

recommended by an installation professional and follow the instructions that

come with the mount.

Before installing the projector in the ceiling, please check to make sure the

ceiling structure can support the weight of the projector and the mount. If in

doubt, please ask the advice from an installation professional.

NOTE: Projector mount and screw(s) not included

Follow below picture to adjust the vertical location.

Adjust The Focus And Keystone

SCREEN

PROJECTOR VERTICAL

DIMENSION

VERTICAL

DIMENSION

SCREEN

PROJECTOR

VERTICAL

DIMENSION

SCREEN

PROJECTOR

AV HDMI USB VG A

AVHDMIUSBVGA

Adjust this knob ( ANGLE ADJ. knob)

to ﬁne- tune the display angle to higher.

AVHDMI

KEYSTONE ADJ. KNOB

FOCUS ADJ. KNOB

Then sharpen the image

by rotating focus knob.

Follow the below picture to adjust the focus and trapezoidal screen.

Adjust the focus by turning the knob while observing the image pixels near the

center of the screen. Optimal focus is obtained when the pixels are clearly

visible. Depending on the projected screen size, the focus near the screen

edges may be less sharp than the screen center.

Keystone image is created when the projector lens is projected from above or

below the center of the screen. Keystone correction restores the distorted

image to a rectangular or square shape.

Controls Of Remote

2ABC

1/ @3D EF

4GHI 5JKL 6M NO

7PQRS 8TU V 9WXYZ

FLIP

EXIT

FAV/

RECALL

EXIT

BATTERY DOOR

Install / Replace Baery Of Remote

BATTERY PRECAUTIONS:

Follow these precautions when using a battery

in this device:

1. Use only the size and type of battery

specified.

2. Be sure to follow the correct polarity when

installing the battery as indicated in the

battery compartment. A reversed battery

may cause damage to the device.

3. Do not mix different types of batteries

together (e.g. Alkaline and Carbon-zinc) or

old batteries with fresh ones.

4. If the batteries in the device are consumed

or the device is not to be used for a long

period of time, remove the batteries to

prevent damage or injury from possible

battery leakage.

5. Do not try to recharge the battery not

intended to be recharged; it can overheat

and rupture. (Follow battery manufacturer’s

instructions.)

6. Do not dispose of battery in fire. Battery

may explode or leak.

7. Clean the battery contacts and also those

of the device prior to battery installation.

1. LENS

2. ANGEL ADJ. Knob

3. VGA IN Port

4. IR Sensor

5. FOCUS ADJ. Knob

6. TRAPEZOIDAL ADJ. Knob

9. POWER Indicator

Controls Of Projector

15. EAR PHONE Jack

16. AV IN Jack

17. TF Card Slot

18. HDMI 1 & 2 Ports

19. USB Port

20. DC IN Jack

VGA IR

HDMI 2

HDMI 1 USB

15 16 17 18 19 20

Connect the small plug from supplied AC/DC Adaptor to the DC IN Jack

on the rear of unit then plug the AC/DC Adaptor to a wall outlet having

AC 100-240V~; 50/60Hz.

- Press the button to turn on unit, press again to turn off.

/ SOURCE - Press the button to select input source.

/ MENU - Press the button to enter projector menu.

- Press the buttons to navigate and select screen item of menu.

/ EXIT - Press the button to return to previous status or exit the menu.

- Press the buttons to fast search forward and rewind on USB / TF.

- Press the buttons to search next or previous file on USB / TF.

VOL+ / VOL - Press the buttons to select the sound level.

- Press the button to play/pause the playback of file on USB / TF card.

FLIP - Press the button to rotate / mirror projector screen

ZOOM - Press the button to select image scale.

- Press to mute the audio. Press again to resume.

NOTES:

• If you will not use the unit for an extended period

of time, unplug the AC/DC Adaptor from wall outlet.

• The AC/DC Adaptor is intended to be correctly

orientated in a vertical or floor mount position.

AV TF CARD HDMI 1 HDMI 2

DC IN

USB

AC/DC Adaptor

Power Source

Refer to the following picture to connect a set top box, a BD/DVD player or a

streaming player to the HDMI input.

1. Turn off the unit before connecting HDMI cable.

2. After connecting, press the button to turn on unit, the power indicator

power indicator will turn GREEN.

3. Press the button to select HDMI 1 or HDMI 2 and the

video from the connected device will be shown on projector screen.

4. Press the button to turn off unit power.

Follow below picture to connect AV cable and device.

1. Turn off the unit before connecting AV cable.

2. Use AV cable to connect following the below figure.

3. After connecting, press the button to turn on unit, power indicator will

turn GREEN.

4. Press the button to select AV mode and the video of AV

device will be shown on projector screen.

5. Press the button to turn off unit power.

Important Note:

If there is no sound from the internal speakers when playing media

contents from a set top box, BD/DVD or streaming players connecting to

the HDMI input, please check the set top box or the player's digital audio

settings and make sure it is set to "PCM Stereo" mode.

Connect HDMI Show The Image On Projector Screen

Connect AV Show The Image On Projector Screen

VIDEO CABLE LEFT CHANNEL

RIGHT CHANNEL

AV TF CAR D

HDMI 1 HDMI 2

DC IN

USB

HDMI CABLE

CABLE NOT INCLUDED

Video Player

AV TF CA RD

HDM I 1 HD MI 2

DC IN

USB

HDMI Stre aming player (n ot included)

Connect VGA Show The Image On Projector Screen

Please refer to the following table to adjust the output signal from computer.

NOTE: In order to get the sound from the unit, please connect AV IN cable when

you connect VGA input.

VGA 640x480

31.5 60

34.7 70

37.9 72

37.5 75

SVGA 800x600

31.4 50

35.1 56

37.9 60

46.6 70

48.1 72

46.9 75

XGA 1024x768

40.3 50

48.4 60

56.5 70

Follow below picture to connect VGA cable and device.

1. Turn off the unit before connect VGA cable.

2. Press the button to turn off power of your projector before connection.

3. After connect, press the button to turn on unit, power indicator will

turn GREEN.

4. Press the button to select VGA mode and the video of

VGA device will show on projector screen.

5. Press the button to turn off unit power.

To VGA PORT

NOTE BOOK DECK TOP

COMPUTER CABLE COMPUTER CABLE

VGA IR

Altri manuali per MP601

Indice

Altri manuali Magnavox Proiettore

Magnavox

Magnavox MP601 Manuale utente

Manuali Proiettore popolari di altre marche

iEmmet

iEmmet MP-312 Manuale utente

Epson

Epson VS400 Manuale utente

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuale utente

Sony

Sony VPL-HW65ES Manuale di servizio

Toshiba

Toshiba TLP-791U Manuale utente

Philips

Philips LC1341 Guida di riferimento

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuale utente

NEC

NEC NP600S EDU Manuale utente

BenQ

BenQ SH753P Manuale utente

Eiki

Eiki EK-623U series Manuale utente

Epson

Epson PowerLite Pro Cinema 6020UB Manuale utente

Epson

Epson PowerLite Home Cinema 705HD Manuale utente

Christie

Christie LHD700 Manuale utente

Navitar

Navitar FX Manuale utente

InFocus

InFocus LitePro 560 Manuale utente

Sony

Sony SRX-R815P Manuale utente

Vivitar

Vivitar DP1500 X Manuale utente

Acer

Acer C20 Series Manuale utente