Magnetek FLEX EX2 Manuale utente
Pa
g
e 1
123
Flex EX2 Plugin Charging
Instructions
1) Power USB Input 2) Charging Status LED 3) Charging Plug
1) The plugin charger station uses any off-the-shelf Micro USB-to-USB cable and
USB power adaptor with 5V@2A output (not included).
2) Connect the charging plug onto the charging connector on battery cover.
Pa
g
e 2
3) Make sure the marking on the charging plug (see below) is facing the top side
when connecting.
4) The transmitter is designed to accept any off-the-shelf Ni-MH rechargeable
batteries. Depending on the battery capacity the average charging time is
approximately 1.5 hours from completely drained to fully charged. Constant red
on the LED represents charging in progress, constant green represents batteries
fully charged, and LED off represents no batteries detected. Please do not use
any rechargeable lithium ion batteries as it will damage both the transmitter and
the charging station.
Altri manuali per FLEX EX2
3
Indice
Altri manuali Magnetek Trasmettitore
Magnetek
Magnetek CHTX Manuale utente
Magnetek
Magnetek Flex EX Series Manuale utente
Magnetek
Magnetek Flex Pro Manuale utente
Magnetek
Magnetek Telemotive MLTX Manuale utente
Magnetek
Magnetek Enrange MLTX Manuale utente
Magnetek
Magnetek Enrange XLTX Manuale utente
Magnetek
Magnetek Telemotive TelePendant Istruzioni per il montaggio
Magnetek
Magnetek Telemotive MLTX2 Manuale utente
Magnetek
Magnetek telePilot TX12M-1 Manuale utente
Magnetek
Magnetek Flex Pro Manuale utente
