M&R Chameleon CHAM1-4-4 Manuale utente
$35.00
Part No. MAN-CHAM
090302MS
M&R Printing Equipment, Inc.
www.mrprint.com
Toll Free 1-800-736-6431
International 1-630-858-6101
Chameleon
Operator’s Manual
Patent No. 5,845,569
A publication of M&R Printing Equipment, Inc. All information contained herein is derived in part from proprietary and
patent data of M&R. This publication may not be reproduced, copied, or transmitted in any form without prior permis-
sion from M&R. Printed in the U.S.A. All Rights Reserved. 2002
IMPORTANT!
The product described in this publication may employ hazardous voltages or might cre-
ate other conditions that could, through misuse, inattention, or lack of understanding,
result in personal injury, or damage to the product or to other equipment. It is imperative,
therefore, that personnel involved in the installation, maintenance, or use of this product
understand the operation of the product and the contents of this publication.
This document is based on information available at the time of its publication. While
efforts have been made to be accurate, the information contained herein does not pur-
port to cover all details or variations in hardware, software, features or specifications, nor
to provide for every possible contingency in connection with installation, operation and
maintenance. Features may be described herein which are not present in all variations of
this product. M&R Printing Equipment, Inc. (M&R) assumes no obligation of notice to
holders of this document with respect to changes subsequently made.
M&R makes no representation or warranty, expressed, implied or statutory with respect
to, and assumes no responsibility for the accuracy, completeness, sufficiency or useful-
ness of the information contained herein. No warranties of merchantability or fitness for
purpose shall apply.
i
IMPORTANT!
The information listed below will prove helpful when ordering replacement parts,
requesting service or repairs. Please fill in the following information. The Model
No., Serial No., Schematic No. and Machine No. are all located on the
Manufacturers Rating Plate mounted to the equipment. Should you have any
questions regarding this information, please do not hesitate to contact our
Equipment Service Department at 1-800-736-6431 during normal business hours.
Product Name:
Model No.
Serial No.
Schematic No.
Machine No.
Date of Installation:
Installed By:
Valued Customer,
Thank you and congratulations on your purchase of the Chameleon Manual Textile Screen Printing
System.
The new, easy change Chameleon is clearly the most versatile, cost effective manual press available
today. The rigidly built Chameleon features a revolutionary duo deck design (Patent No. 5,845,569) that
is engineered for today’s production demands while providing the expendability needed to meet
tomorrow’s challenges.
The purpose of this manual is to help guide, and inform employees in the proper procedures required
for assembly, operation and preventive maintenance of your new Chameleon. Please take a moment
to review the information in the manual before you begin your first production run.
Should it be needed, our worldwide network of Technical Service and Support Representatives are as
close as your telephone. During normal business hours call 1-630-858-6101. During weekends or hol-
idays call our 24 hour Emergency Service Hot-Line at 1-630-462-4715 for technical support.
On behalf of all of us here at M&R, thank you for selecting us as your equipment supplier.
Michael J. Sweers
Director of Technical Services
M&R Printing Equipment, Inc.
M
&
R
P
r
i
n
t
i
n
g
E
q
u
i
p
m
e
n
t
,
I
n
c
.
W
o
r
l
d
w
i
d
e
T
e
c
h
n
i
c
a
l
S
e
r
v
i
c
e
N
e
t
w
o
r
k
Table of
Contents Disclaimer
Model Description
Introduction
Safety Precautions . . . . . . . . . . . . . . . . . . . .1
Specifications . . . . . . . . . . . . . . . . . . . . . . . .3
Screen Frame and Image Size . . . . . . . . . . . .4
Assembly Instructions . . . . . . . . . . . . . . . . . .5
Set-Up Instructions . . . . . . . . . . . . . . . . . . . .8
Preventive Maintenance . . . . . . . . . . . . . . . .13
Warranty Information
Electrical Schematics
Safety Precautions and
Specifications
Set-Up and
Operation
Preventive
Maintenance
Chameleon
Safety Precautions
Glen Ellyn, Illinois
1
Chameleon
FUNDAMENTAL SAFETY INSTRUCTIONS
Please read all information regarding safety precautions
as presented in the operator’s manual.
The fundamental requirement to assure safe and trouble-free
operation of this equipment, is a thorough understanding of
the safety information contained in this operators manual.
This operator’s manual includes important instructions to
assure safe operation of this equipment. This operator’s
manual, and especially the safety instructions as described
there-in, must be observed by everyone who will operate
this equipment. In addition to the safety instructions and
regulations described in this operator’s manual, rules and
regulations of the equipment owners place of business
must also be observed.
Obligation of the Equipment Operator
The equipment Operator is obliged to guarantee that only
staff who are acquainted with the fundamental regulations
according to Workers protection and accident prevention,
and, are completely knowledgeable in the operation of this
equipment have fully read the Safety Chapter and the
Warning Instructions of this manual, and understand the
instructions as they relate to operation of this equipment.
Equipment operator must be continually evaluated to assure
that they fully understand the operation of this equipment.
Obligation of Personnel
Every person that will be engaged in the operation of this
equipment must comply with the following before operation
of the equipment is to begin.
1. Observe the fundamental regulations of worker’s protec-
tion and accident prevention.
2. Read the Safety Chapter and Warning Instructions of this
operator’s manual and confirm by signature that they
understand the instructions as described in the manual.
Defined Purpose
The Chameleon is specifically designed to apply screen
printed textile inks onto textile substrates. Any other use of
the equipment which does not meet the Defined Purpose as
described above is not permitted.
In accordance with the Defined Purpose of this equipment,
it is necessary to observe all instructions as outlined in the
operator’s manual and to perform the preventive mainte-
nance procedures as described in the manual.
Guarantee and Liability
In principle, our general terms of sale and delivery are valid
and these are at the operator’s disposal. Guarantee and lia-
bility claims for persons or property damage are excluded if
they originate for one or more of the following reasons.
1. A non-defined use of the equipment
2. Improper installation or use of the equipment
3. Operation of the equipment with defective safety
devices
4. Non-Observance of instructions as described in the
operator’s manual for transportation, storage, instal-
lation, operation, maintenance, set-up and take-
down of the equipment.
5. Modification of the equipment.
6. Failure to replace worn or defective parts of the
equipment.
7. Defective repairs made to the equipment.
8. Dangerous conditions which are a result of the
improper use of the equipment
Description of Safety Symbols and
Instructions
This symbol signifies or alerts the
equipment operator of conditions or
areas of the equipment which present
imminent danger to the health of the
equipment operator. Non-obser-
vance of these instructions has seri-
ous health consequences, and can
lead to highly dangerous injuries.
This symbol signifies a possible immi-
nent danger for life and health of per-
sons and equipment operators. Non-
observance of these instructions
can have serious health conse-
quences and can lead to highly dan-
gerous injuries.
This symbol signifies a possible danger.
Non-observance of these instruc-
tions can lead to light injuries or dam-
age to the equipment or property.
DANGER!
WARNING!
CAUTION!
Safety Precautions
Glen Ellyn, Illinois
2
Chameleon
This symbol gives important instructions
for the proper use of the equipment.
Non-observance of these instructions
can lead to equipment failure.
This symbol is used to describe oper-
ating tips or especially useful informa-
tion. This information will enable the
operator to use all equipment func-
tions for optimal performance.
Exploratory Safety Measures
The operators manual must be kept on or near the equip-
ment at all times. All safety and danger notices must be kept
in readable condition at all times.
Training of Equipment Operators
Only properly trained operators may run the equipment. The
competence of personnel who are to operate, maintain, set-
up and shut down the equipment must be confirmed.
Unskilled staff may work with the equipment only when
supervised by experienced equipment operators.
Danger by Pneumatic Energy
Only personnel with experience with pneumatic power sys-
tems may work with pneumatic components or assemblies.
Before starting any work on pneumatic components or
assemblies, the compressed air supply must be com-
pletely drained from the equipment to prevent any oper-
ation of pneumatic controls or assemblies.
All pneumatic piping and/or hoses must be checked at reg-
ular intervals for signs of wear or failure.
Maintenance and Troubleshooting
Preventive maintenance must be performed at regular inter-
vals as described in the operators manual. Equipment
operators must be informed before any preventive mainte-
nance can be performed.
All power systems such as electrical, pneumatic, hydraulic
or mechanical must be disconnected and locked out before
preventive maintenance may begin.
Structural Modification of the Equipment
Modifications of equipment are specifically not allowed with
out written authorization from M&R.
Cleaning of the Equipment
Clean away all ink or other contaminant’s at the end of
each day.
i
IMPORTANT!
OPERATING
TIP
Questo manuale è adatto per i seguenti modelli
6
Indice
Altri manuali M&R Stampante
