Manitowoc I1406 Series Istruzioni operative e di sicurezza

Manitowoc Ice

2110 South 26th Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA 000013291

Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879 Page 1 of 2

Web Site - www.manitowocice.com Rev 00

COMPRESSOR REPLACEMENT

I1406 SERIES

1. Disconnect the power to the ice machine at the electrical 6. Unbraze the suction line at the compressor port. Unbraze

panel. (pushing the power button to the off position the discharge port at the compressor.

will not disconnect line voltage). Unbraze the bottom joint at the compressor discharge port.

2. Remove all the panels (top, front left, and right sides). Cut the tubing when replacing filter drier.

3. Recover all refrigerant from the ice machine. Do not unbraze the filter drier.

4. Remove the right rear back panel and top rail.

Note:

(Orientation is done while facing the front of the ice machine)

Note: When replacing the compressor in a Remote

Ice Machine; be sure to unbraze the suction

and process port at the compressor, replace

the filter drier. Cut tubing to replace the

filter dryer. Do not unbraze filter drier.

Remember that there are four points of

recovery on a remote.

5. Remove the wiring or plug from the compressor terminals.

7. Remove the compressor from the ice machine. Make

sure compressor ports are crimped and brazed shut.

Unbraze

I1406

Compressor

plug location

I1406

Compressor

position

Filter Drier

Cut the tubing

4 Recovery

Points

Manitowoc Ice

2110 South 26th Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA 000013291

Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879 Page 2 of 2

Web Site - www.manitowocice.com Rev 00

COMPRESSOR REPLACEMENT

I1406 SERIES

9. Insert the NEW compressor into the Ice Machine, and

Position the compressor as shown.

11. Purge the system with nitrogen before and during

all brazing operations.

I1406 Air, Water, & Remote Ice Machines

12. Position the tubes back into compressor.

13. Replace the filter drier before evacuating the refrigeration

system of the ice machine.

Secure in place while brazing the joints

10. Reinsert the old tubing into the new compressor ports. Braze all tubing into place.

Insert 1/2 OD discharge tube into the discharge port of 14. Evacuate to 500 microns minimum.

the compressor. Insert 5/8 OD suction tube and bushing Insure that all the tubing is not rubbing against

supplied with the kit, (if required) port of the compressor. anything in the ice machine.

Braze tubes into the compressor ports. Insure that the thermistor and clip are replaced back onto

the 1/2 OD discharge tube and the new thermistor boot

Adjust the tubing to fit without rubbing supplied in the kit.

any other tubing or parts of the ice machine. 15. Reinstall the corner post and then the top rail.

16. Be sure to replace the run capacitor supplied with

compressor kit.

17. Weigh in correct refrigerant charge from the nameplate

found on the ice machine.

18. Reconnect the compressor with the wiring harness.

19. Reinstall all the other remaining outer panels.

20. Reconnect the power and turn on power switch.

Test and run the ice machine.

Suction tube

position.

New

Compressor

Discharge tube

connection position

Suction

Tube

Discharge

Tube

Thermistor boot

Altri manuali Manitowoc Macchina per il ghiaccio

Manitowoc

Manitowoc Indigo NXT Manuale utente

Manitowoc

Manitowoc QR0320A Manuale utente

Manitowoc

Manitowoc TIMER GSI 200 Manuale utente

Manitowoc

Manitowoc Indigo Series Manuale utente

Manitowoc

Manitowoc Q Manuale utente

Manitowoc

Manitowoc QuietQube Series Manuale utente

Manitowoc

Manitowoc UG Series Manuale utente

Manitowoc

Manitowoc AUCS-SI K00363 Manuale utente

Manitowoc

Manitowoc RF Guida

Manitowoc

Manitowoc QM 20 Manuale utente

Manitowoc

Manitowoc Q130 series Istruzioni per l’uso

Manitowoc

Manitowoc Indigo Series Manuale utente

Manitowoc

Manitowoc RFF Manuale utente

Manitowoc

Manitowoc SM Istruzioni per l’uso

Manitowoc

Manitowoc Q130 series Istruzioni per l’uso

Manitowoc

Manitowoc G-1700 Manuale utente

Manitowoc

Manitowoc SM Series Manuale utente

Manitowoc

Manitowoc Q 7628973 Manuale utente

Manitowoc

Manitowoc S model Istruzioni per l’uso

Manitowoc

Manitowoc ICE MACHINE K00385 Manuale utente

Manitowoc

Manitowoc S series Manuale utente

Manitowoc

Manitowoc QF0400 Manuale utente

Manitowoc

Manitowoc FS9000 Manuale utente

Manitowoc

Manitowoc ENDURO 300 KH0180 Manuale utente

Manuali Macchina per il ghiaccio popolari di altre marche

Hoshizaki

Hoshizaki KMD-460MWJ Manuale utente

Sub-Zero

Sub-Zero 315I Istruzioni per l’uso

Unold

Unold 48945 Manuale utente

Kenmore

Kenmore 2217402A Manuale utente

Cornelius

Cornelius WM600 Istruzioni operative

GE XPIO43SCSS Manuale utente

Hoshizaki

Hoshizaki KMD-901MAH Manuale utente

Whynter

Whynter FIM-450HA Manuale utente

U-Line

U-Line UMCR014-SC01A Manuale di installazione

Andrew James

Andrew James AJ000522 Manuale utente

Scotsman

Scotsman CME1356 Manuale utente

Scotsman

Scotsman ACM 25 Manuale utente

Kärcher

Kärcher IP 120 Manuale utente

U-Line

U-Line SS1095 Manuale utente

Maytag

Maytag MIM1554WRS - Ice Maker Manuale utente

Hoshizaki

Hoshizaki KM-630MAH Manuale utente

Princess

Princess Yonanas Manuale utente

Unold

Unold 48946 Manuale utente