Marmitek Invisible Control 6 XTRA Manuale utente

isible Contr

TRA | SMA

20662/20160201 • Invisible Control 6 XTRA | SMART™

USER MANUAL 3

GEBRAUCHSANLEITUNG 15

GUIDE UTILISATEUR 27

MODO DE EMPLEO 39

MANUALE D’ISTRUZIONI 51

GEBRUIKSAANWIJZING 63

Invisible Control

6 XTRA | SMART

™

Invisible Control 6 XTRA | SMART™

ENGLISH

SAFETY WARNINGS

xTo prevent short circuits, this product should only be used

inside and only in dry spaces. Do not expose the

components to rain or moisture. Do not use the product close

to a bath, swimming pool etc.

xDo not expose the components of your systems to extremely

high temperatures or bright light sources.

xIn case of improper usage or if you have altered and repaired

the product yourself, all guarantees expire. Marmitek does

not accept responsibility in the case of improper usage of the

product or when the product is used for purposes other than

specified. Marmitek does not accept responsibility for

additional damage other than covered by the legal product

responsibility.

xDo not open the product: the device may contain live parts.

The product should only be repaired or serviced by a

qualified repairman.

xOnly connect the adapter to the mains after checking

whether the mains voltage is the same as the values on the

identification tags. Never connect an adapter when it is

damaged. In that case, contact your supplier.

xThis product is not a toy. Keep out of reach of children.

1. INTRODUCTION

Congratulations on your purchase of the Invisible Control 6 XTRA

| SMART™! The Invisible Control 6 XTRA | SMART™ allows you to

extend the IR (infrared) signals from your remote control and to

operate your A/V equipment using your smartphone/tablet via the

corresponding iOS or Android app. The Invisible Control 6 XTRA |

SMART™gives you the opportunity to control your A/V equipment

when it’s stored away in a closed cabinet or placed out of sight.

Marmitek products are manufactured with the utmost care and are

exceptionally high quality. Please read this manual carefully and

follow the instructions in order to get the best from this product.

2. SET CONTENTS

1x IR Receiver + adhesive strip

1x IR Smart module + adhesive strip

1x IR Extender cable with one IR blaster LED + adhesive strip

2x IR Extender cable with two IR blaster LEDs + adhesive strip

1x Power Adapter

1x User manual

3. HOW DOES IT WORK?

Place your A/V equipment inside a closed (TV) cabinet. The IR

receiver (1) should be installed within your remote control's line of

sight. Stick the Blaster LEDs (2) marked 'IR OUT' wherever you

like inside the (TV) cabinet, enabling you to operate all A/V

equipment in the same compartment. Stick the Blaster LED (3)

marked 'IR TV' on the outside of the (TV) cabinet on or within sight

of your TV's IR sensor. Then store the IR Smart Module (4) neatly

away.

Point the remote at the small IR receiver to send the desired

command to the 'IR OUT' Blaster LEDs (2); these will instantly

transfer the infrared command to the A/V equipment inside the

(TV) cabinet. The 'IR TV' Blaster LED (3) is only operated using

your smartphone/tablet.

Invisible Control 6 XTRA | SMART™

ENGLISH

4. INSTALLATION

In order to check that the system works correctly, it is advisable to

first test the set-up you had in mind. To do so, connect everything

as described below but do not stick the components securely.

4.1 LOCATING THE IR RECEIVER

Place the very small IR receiver (1) that comes with the Invisible

Control 6 XTRA | SMART™so that it can be seen by your (infrared)

remote control and receive the commands (max. 10 metres).

xThe most logical location for the IR receiver is, for example,

on the (TV) cabinet in which the A/V equipment is located or

near the TV.

xYou can run the cable underneath or behind, using the notch

at the back of the IR receiver housing; this allows the cable

to be hidden easily.

xUse the self-adhesive strip which is supplied to locate the IR

receiver just about anywhere you please.

xExperiment with the location before you stick the IR receiver

in its final position.

xNote! The sticky strip may lead to discolouration or leave

glue residues on certain surfaces.

4.2 LOCATING THE IR BLASTER LED

4.2.1 Inside the (TV) cabinet

Stick the Blaster LEDs (2) that are connected to the 'IR OUT'

output wherever you like inside the (TV) cabinet, enabling you to

operate all A/V equipment inside the same compartment.

xWith a correct placement one blaster LED can control all A/V

devices placed in the same compartment.

xIn some situations it is necessary to place a second blaster

LED if not all A/V devices can be controlled with one blaster

LED.

xOr you place the blaster LED on one of the A/V devices in

the middle of the (TV) cabinet and the other equipment will

be controlled as well by the reflection of the infrared signal.

Invisible Control 6 XTRA | SMART™

ENGLISH

4.2.2 Outside the (TV) cabinet

Stick the Blaster LED (3) that is connected to the 'IR TV' 'output,

outside the (TV) cabinet on or within sight of your TV's IR sensor.

4.3 Positioning the IR Smart module

Place the IR Smart Module (4) in an accessible place on or next to

your A/V equipment, and near an electrical outlet.

xTake into account the cable

length of the IR Blaster

LED and the IR receiver

cable.

xNote that the connectors

remain accessible and that

the LEDs remain visible to

check for proper operation.

xThe supplied adhesive strip

allows

placement practically

anywhere.

Invisible Control 6 XTRA | SMART™

ENGLISH

4.4 Connecting the IR Smart module

1. Connect the installed IR extension cables with two Blaster

LEDs to the IR Smart Module's 'IR OUT' jack.

2. Connect the installed IR extension cables with one Blaster

LED to the IR Smart Module's 'IR TV' jack.

3. Connect the installed IR Receiver cable to the ‘IR IN’

connection on the IR Module:

4. Connect the USB Power adapter to the ‘POWER’ connection

on the IR Module and plug this into an electrical socket.

5. If the Invisible Control 6 XTRA | SMART™ is connected

correctly, the red light on the IR Smart module will flash when

a button on the (infrared) remote control is pressed while

pointing the remote to the IR receiver.

6. Close the doors of your (TV) cabinet to ensure that the A/V

equipment cannot receive an infrared command directly from

the remote control as this can lead to operational problems.

7. You can now operate the A/V equipment via the Invisible

Control 6 XTRA | SMART™through closed cupboard doors!

4.5 Installing the Invisible Control app

When the Marmitek Invisible Control 6 XTRA | SMART™ is installed

by following the steps in this manual, you can, in addition to your

remote control, also use your smartphone/tablet to operate any

devices outside the line of sight. First, you will need to install the

Marmitek Invisible Control app and enable Bluetooth on your

smartphone/tablet.

Then, the app automatically establishes a Bluetooth connection,

after which you can start adding features. Check the "Help" button

in the app's settings menu to learn how to best use the app.

Download the ''Invisible Control" app

on your smartphone/tablet:

http://goo.gl/nR2doa

http://goo.gl/iIOXIV

Altri manuali per Invisible Control 6 XTRA

Indice

Lingue:

Altri manuali Marmitek Estensione

Marmitek

Marmitek VideoControl3 Manuale di istruzioni

Marmitek

Marmitek Invisible Control 6 Manuale utente

Marmitek

Marmitek 100304 Manuale utente

Marmitek

Marmitek GigaView 911 UHD Manuale utente

Marmitek

Marmitek IR Control 10 Manuale utente

Marmitek

Marmitek Powermid 300 XTRA Manuale utente

Marmitek

Marmitek VideoControl3 Manuale utente

Marmitek

Marmitek MegaView 251 Pro Manuale utente

Marmitek

Marmitek IR CONTROL 8 Manuale utente

Marmitek

Marmitek MegaView 63 Manuale utente

Marmitek

Marmitek POWERMID XL Manuale utente

Marmitek

Marmitek IR 100 USB Manuale utente

Marmitek

Marmitek Powermid XS Manuale utente

Marmitek

Marmitek GIGAVIDEO 570 Manuale utente

Marmitek

Marmitek MegaView 65 Manuale utente

Marmitek

Marmitek Megaview 80 Manuale utente

Marmitek

Marmitek Powermid XS Manuale utente

Marmitek

Marmitek Megaview60 Manuale utente

Marmitek

Marmitek IR Eye Manuale utente

Marmitek

Marmitek MegaView 60 Manuale utente

Marmitek

Marmitek MegaView 76 Manuale utente

Marmitek

Marmitek POWERMID XL Manuale utente

Marmitek

Marmitek MegaView 67 Pro Manuale utente

Marmitek

Marmitek MegaView61 Manuale utente

Manuali Estensione popolari di altre marche

SY HDBT-60T Manuale utente

Appsys ProAudio

Appsys ProAudio ADX-16 Manuale utente

Atlona

Atlona RS232 Manuale utente

IDK

IDK OPF-TH1000-A Manuale utente

Enable-IT

Enable-IT 824WP Manuale utente

Worx

Worx Landroid RadioLink WA0864 Scheda tecnica

TP-Link

TP-Link TL-WA730RE Manuale utente

Camplex

Camplex CMX-HDMI-SFPL Manuale utente

SC&T

SC&T HE03-4K Manuale utente

Samsung

Samsung SCS-26UC4 Manuale utente

Foxun

Foxun SX-GES24 Manuale utente

MuxLab

MuxLab 500771 Manuale utente

foxunhd

foxunhd SX-AEX01 Manuale utente

TERK Technologies

TERK Technologies LFIRX2 Manuale utente

Devolo

Devolo Audio Extender Manuale

Edimax

Edimax EW-7438RPn V2 Manuale utente

Shinybow USA

Shinybow USA SB-6335T5 Manuale utente

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Manuale utente