Marsden M-999 Manuale utente

USER MANUAL

M-999 Patient

Transfer Scale

Please take time to read these instructions

before starting to use the scale

Version 1.0 10/18

Contents

Introduction 3

Product Specification 3

Safety Instructions 4

Cleaning 5

Explanation of Graphic Symbols 6

LCD Display 7

Recharging the M-999 8

Setting up the Scale 9

Preparing to use the Scale 10

Operation: Basic Functions 12

Operation: Advanced Functions 13

EMC Guidance and Manufacturer’s Declaration 14

Error Messages 18

Manufacturer’s Declaration of Conformity 19

Contact Information 20

Page 2

Thank you for purchasing this Marsden Patient Transfer Scale. This is a

precision Class III Weighing Instrument and considerate use will result in

many years of accurate weighing.

The scale has a maximum load capacity of 250kg which must not be

exceeded.

Product Specification

Model

M-999

Accuracy Class

Class III

Capacity/Division

250kg x 0.5kg

Weight of scale

11.4kg

Units of Measure

Function Keys

ON/OFF/ZERO, HOLD

Operating Temperature/Humidity

5 to 35˚C / 15 - 85% RH

Power Supply

Rechargeable battery pack

Display

27.7mm x 75mm LCD

Dimensions

1805mm X 700mm X 30mm

Page 3

Safety Instructions

Before putting the device into use, please read with care the information given in this user manual,

which contains important instructions for proper installation, use and maintenance of the device.

Marsden/the manufacturer shall not be liable for damages arising from failure to heed the following

instructions:

•When using electrical components under increased safety requirements, always comply with

appropriate regulations.

•Inappropriate installation/use will render the warranty null and void.

•Ensure the voltage marked on the power supply unit matches your mains supply.

•This device is designed for use indoors.

•Observe the permissible ambient temperatures for use.

•The device meets the requirements for electromagnetic capability. Do not exceed the

maximum values specified in the applicable standards.

•Batteries should be kept away from small children. If swallowed, promptly seek medical

assistance.

If you have any problems, contact Marsden/your local dealer/your service partner.

Maintenance

•We recommend checking the scale’s accuracy at regular intervals. If any inaccuracies occur,

please contact your local dealer or service partner.

•Repairs should be carried out by authorised service agents. For information regarding Marsden

service contracts in the UK, call 01709 364296.

Disposing of the Scale

•This product should not be treated as regular household waste, but should be handed in to an

electrical/electronic equipment recycling centre.

•You can obtain further details from your local council, your municipal waste disposal company

or from where you purchased the product.

Page 4

Cleaning

When cleaning or disinfecting the Patient Transfer Scale, please follow the guidance below.

•To clean and disinfect the Patient Transfer Scale, use a chlorine releasing agent with detergent.

•Use a non-abrasive cloth.

•Please do not use corrosive liquids, large amounts of water or high pressure washers.

•Do not submerge the PTS in water. If you think the scale may have suffered water ingress, stop

using it immediately and contact Marsden/your local dealer/your service partner.

•Always disconnect the PTS from the mains power supply before cleaning.

Page 5

Explanation of Graphic Symbols

SN-21300100

Designation of the serial number of

every device.

(Number as an example)

“Please note the accompanying

documents” or “Observe operating

instructions”

Charder Electronic Co. Ltd

No.103 Guozhong Rd, Dali Dist,

Taichung City 412, Taiwan (R.O.C)

Identification of manufacturer of medical

product including address.

Type B applied part

Dispose of old appliances separately

from your household waste.

This product must be disposed of at a

communal collection point.

Carefully read this operation manual

before setup and commissioning, even if

you are already familiar with Marsden

scales.

Page 6

LCD Display

HOLD

Stable symbol: To indicator the weight reading is stable

Minor weight: The weight is under zero.

Zero symbol: The weight is at zero point.

Low battery: Please recharge the scale.

ON/OFF/ZERO

Stable symbol

Minus weight

Zero symbol

Low battery

HOLD

Page 7

Recharging the Scale

We recommend fully charging the scale before first use. To fully charge the scale please allow 8 hours.

When the low battery indicator on the LCD display indicates that the scale needs recharging, move

the M-999 to a location where it can be charged. You will find the charging port on the underside of

the scale.

The port for the charging cable is magnetic. Clip the end of the cable in place and plug the other end

of the cable into a power socket. Please do not use any form of charging cable other than the one

supplied with the scale. The scale cannot be used whilst recharging.

Page 8

Setting up the Scale

With the scale switched on, press HOLD for six seconds. You will then enter Setup for

auto power-off, buzzer and backlight.

Auto off time: 30m /60 m/off

Buzzer: On/Off

Backlight: ON/OFF

Auto power-off:

Buzzer on/off:

Backlight on/off:

To confirm the settings, please press HOLD when shows on the display.

Page 9

Preparing to use the Scale

The Patient Transfer Scale should be used in line with current moving and handling

policies. Essentially, it should be used in the same way you would use a transfer board,

taking into account of course that you will need to pause during the transfer process.

•The Patient Transfer Weighing Scale should only be used by trained professionals.

•Ensure brakes on castors are applied before you begin the transfer process.

•The distance between the bed and trolley/bed must be no more than 100mm

•The Patient Transfer Scale must have a minimum of 200mm on each bed or

trolley and bed before use.

•When transferring, the two surfaces must be of similar height. A tilt of less than

3% (one side raised by around 25mm) is ok; a tilt greater than this will affect the

scale’s accuracy. To avoid showing an inaccurate reading, the scale will display an

error message if tilt exceeds 3%.

•Guidance for safe use can also be found on the scale itself (see next page).

Page 10

Indice

Altri manuali marsden Scala

marsden

marsden MS-4200 Manuale utente

marsden

marsden V-100 Manuale utente

marsden

marsden V-25 Manuale utente

marsden

marsden M-210 Manuale utente

marsden

marsden BS-250BT Manuale utente

marsden

marsden VT-250 Manuale utente

marsden

marsden MS-4400 Manuale utente

marsden

marsden MBF-6000 Manuale utente

marsden

marsden M-400 Manuale utente

marsden

marsden M-550BT Manuale utente

marsden

marsden M-530 Manuale utente

marsden

marsden B-400 Manuale utente

marsden

marsden V-20 Manuale utente

marsden

marsden M-600 Manuale utente

marsden

marsden PB-1200-I-400-APP Manuale utente

marsden

marsden M-950 Manuale utente

marsden

marsden M-800 Manuale utente

marsden

marsden Jadever JCO Manuale utente

marsden

marsden M-65 Series Manuale utente

marsden

marsden M-225 Manuale utente

marsden

marsden M-900 Manuale utente

marsden

marsden MS-150 Manuale utente

marsden

marsden B-100 Manuale utente

marsden

marsden M-565 Manuale utente

Manuali Scala popolari di altre marche

AWS

AWS ZEO-50 Manuale utente

Gima

Gima Glass Body Fat Analyzer Manuale elenco delle parti

Seca

Seca 374 Manuale utente

TEC

TEC TEC SL59 SERIES Manuale utente

Axis

Axis B/E Series Manuale utente

Alecto

Alecto ACW-40 Manuale utente

Rice Lake

Rice Lake MSI-4260 IS Manuale utente

IKA

IKA RCT basic safety control Manuale utente

ADE

ADE M20011 Manuale utente

Duronic

Duronic KS3000 Manuale utente

Digi

Digi SM-720 Manuale utente

Cardinal

Cardinal CS Series Manuale utente

Korona

Korona Kastella Manuale utente

A&D

A&D FC-50Ki Manuale utente

BDA

BDA CAMARGUE Manuale utente

Tanita

Tanita HD-357 Manuale utente

Leifheit

Leifheit 03173 Manuale utente

Lumme

Lumme LU-1340 Manuale utente

marsden M-999 Manuale utente

Manuali Scala popolari di altre marche