Matco T7 PRO CC Guida all'installazione

Basics Manual Semi-automatic

English

Basics Manual 

 
Inhoudsopgave 
1FOREWORD ................................................................................................................................................2 
2SAFETY .......................................................................................................................................................3 
1 SAFE USE .....................................................................................................................................................3 
2 QUALIFIED PERSONNEL................................................................................................................................... 4 
3 ACCIDENT PREVENTION ..................................................................................................................................4 
3USE.............................................................................................................................................................5 
4 OTHER RISKS ................................................................................................................................................ 6 
5 THE SCOPE OF THIS MANUAL............................................................................................................................6 
4INSTALLATION ............................................................................................................................................7 
1 UNPACKING ................................................................................................................................................. 7 
2 TRANSPORT .................................................................................................................................................7 
3 STORAGE.....................................................................................................................................................7 
4 WASTE DISPOSAL .......................................................................................................................................... 7 
5 INSTALLING..................................................................................................................................................7 
6 ELECTRICAL CONNECTION................................................................................................................................ 8 
7 MOUNTING ................................................................................................................................................. 8 
5MAINTENANCE...........................................................................................................................................9 
1 GENERAL..................................................................................................................................................... 9 
2 SPARE PARTS................................................................................................................................................ 9 
2.1 Maintenance schedule................................................................................................................... 10 
2.2 Lubricants ...................................................................................................................................... 10 
3 INSPECTIONS ..............................................................................................................................................11 
 
 

Basics Manual

These operating instructions for the pallet wrapping machine are made so:

-It is safe to use;

-One is able to make settings;

-One can perform maintenance.

Additionally included in this basic manual are:

•Machine specific manual

•CE declaration

SERVICE

In the event of a malfunction, contact:

Matco International.

Tel: +31 (0) 850 49 49 90

E-mail: service@matco-international.com

SPARES

Order spare parts at:

Matco International

Hamburgweg 16,

7418 ES Deventer, Nederland

Tel: +31 (0) 850 49 49 90

E-mail: sparepartsdeventer@matco-international.com

1Foreword

Basics Manual

2Safety

2.1 Safe use

We use the following symbols to warn about dangers and possible sources of risk. Get to know them

well! Ignoring a warning can lead to personal injury and/or damage to this equipment or other

machinery.

Attention:

Failure to observe warnings may result in a fatal accident, personal injury or

damage to equipment.

Attention:

Live electrical components. Failure to observe warnings may result in a

fatal accident, personal injury or damage to equipment.

Attention:

Danger from rotating parts

Prohibited:

Risk of entering a dangerous area. Prohibited for unauthorised personnel!

Attention:

Heat hazard, burn hazard

Basics Manual

2.2 Qualified personnel

Our definition of "qualified personnel" in this context is "personnel with a thorough knowledge of the

equipment itself and how to operate and maintain it safely". Qualified personnel must be physically fit

enough to perform the necessary tasks, have a good knowledge of all the relevant safety precautions

and be trained to install, operate and/or maintain the equipment safely. The company using the

equipment is responsible for ensuring that the personnel comply with these conditions.

2.3 Accident prevention

1. Before starting to work with the installation, the manual must first be studied.

2. Use of the installation by unauthorised personnel is prohibited.

•

3. Never allow persons to use the equipment if they are under the influence of medication that

may impair reaction times or are not in physically fit condition for operating the installation.

4. Ensure at all times that work / maintenance / service on the installation is done safely and

without voltage. Make sure that the installation cannot be switched on accidentally by locking

the main switch.

5. Safety guards must be checked before starting the machine – they may not be loose or

removed. This also applies to the foot protection under the film carriage.

•

6. If it is necessary to remove any safety device to allow installation, repairs or maintenance, the

safety device must be replaced immediately after completing the task.

•

7. Keep limbs and clothes away from rotating parts. Do not wear neckties or loosely hanging

clothes when using or maintaining machines with rotating parts. Remove wristwatches, chains

and similar jewellery. Cover or tie up long hair before carrying out any task on or with the

machine.

•

8. Only machines with a suitable protection rating may be used in humid conditions.

•

9. Do not use the equipment in an area with risk of explosion.

•

10. Always use the equipment in a well-ventilated space.

•

11. If a pneumatic hold-down plate is used, the supply air line will remain under pressure when

entering the danger zone. Other parts will become voltage / energy-free.

Dangerous situations may result from failure to comply with the

conditions listed above.

Basics Manual

3Use

3.1 Intended use

The fully automatic wrapping machine, hereinafter also referred to simply as “the installation”, may

only be used for wrapping pallets of the suitable products that meet the data as stated in the

description. In case of doubt, the manufacturer must be consulted for permission.

Using the installation in any way other than specified in the description can lead to danger, e.g. it can

damage the wrapping machine and/or threaten the safety of operator or other persons near the

installation.

To ensure safety, all personnel must read these operating instructions thoroughly before commissioning

the installation, troubleshooting or performing maintenance.

We would like to call your attention to chapter 2 Safety, which specifies the intended use and the unsafe

situations that cannot be prevented through the design and manufacture of the machine.

3.2 Improper use

The installation may not be used in the following situations:

•When it is in poor condition

•In an environment with risk of explosion (unless the machine is specially adapted)

•With unsuitable materials and consumables

•Without full compliance with the values specified under "Technical data".

•In a humid environment

The following materials may not be processed in the installation:

•Materials presenting a risk of explosion or fire

•Caustic and corrosive materials

•Foodstuffs (unless the machine is specially adapted)

3.3 Intended use

The installation is intended for industrial applications.

Basics Manual

3.4 Other risks

In terms of design and construction, everything has been done to protect users from possible dangers.

However, some risks cannot be entirely eliminated. Users must be aware of the following:

•The risk of entering a dangerous area

•Control line cylinder pressure plate remains under pressure in all cases

•Control line of the film clamp remains under pressure (for turntable winder with 90 ° infeed

or outfeed).

The risk of entering a dangerous area

It is possible to enter dangerous areas when loading and unloading products.

Attention: Prohibited for unauthorised personnel!

Risk of entering a dangerous area.

3.5 The scope of this manual

This manual is only valid in combination with all the other documentation included in the user manual.

For special versions, this manual may be supplemented with extra specifications and/or additional

documentation.

The images only show the installation's essential parts.

Basics Manual

4Installation

Attention:

Only allow qualified personnel to perform the following tasks. Observe all

the safety instructions in this manual and all other relevant documentation.

4.1 Unpacking

Unpack the installation carefully and check for any transport damage. Retain the pallet, fixings and

wrapping material for possible future transport or dispose of it in accordance with the appropriate

waste handling regulations.

4.2 Transport

•For weight specifications check the “Machine specific manual”. Only use suitable lifting gear.

•Protect the installation from damage, damp and dust, using suitable packing materials.

•Avoid bumps and shocks.

4.3 Storage

Do not store the installation outdoors! Protect it against dust and fluctuating temperatures

(condensation formation).

4.4 Waste disposal

When the installation reaches the end of its working life or there is no further use for it, the

equipment should be handled according to the currently valid waste disposal regulations.

4.5 Installing

Only install the installation in a location that conforms to the stated safety classification. Install the

installation in a well-ventilated space. Do not put it in an area with any risk of explosion!

Protect the installation against vibration. Remove transport protection materials (when present).

Make sure there is enough free room, especially above the installation. Check the "Machine specific

manual" for dimensions.

Basics Manual

4.6 Electrical connection

Attention:

Hazardous electrical voltage. Failure to observe warnings and safety measures

may result in a fatal accident, personal injury or damage to equipment.

-Connecting to a power source:

•The preferred way to connect the installation is via a power cable with a plug, connected to an

earthed mains socked that is protected by a circuit breaker or fuse.

•The power supply must, in principle, comply with applicable requirements regarding

acceptable voltage variations, ripple, attenuation of higher harmonics, etc.

4.7 Mounting

Attention:

All of these activities may only be performed under the supervision of

qualified personnel from the manufacturer or an authorised representative!

-The concrete floor must be completely flat and horizontal within the tolerances set by the

installation

-Anchor machine parts to concrete floor.

Basics Manual

5Maintenance

Attention:

-Switch off the main switch and secure it with a padlock before performing

any maintenance on the installation.

-Ensure that no one else can switch on the installation.

-Ensure that safety guards and suchlike are installed when the installation is

activated.

5.1 General

Preventive maintenance will ensure that the installation has a longer working life. This means that the

condition of various parts of the installation must be inspected on a weekly, monthly or annual basis.

The environmental conditions will affect the service life. The specified maintenance frequency applies to

normal operational conditions (8 hours per day, 5 days per week, at 20C, in a clean environment).

When subjected to more demanding conditions we recommend performing maintenance more

frequently. Ensure that moving parts are free of dirt.

Please refer to the maintenance schedule in section 5.2.1 Maintenance schedule for information about the

maintenance frequency required for the different systems and parts.

5.2 Spare parts

The parts lists for the machine parts describe the parts used, which can be ordered as spare parts.

Bij bestelling van onderdelen dient op het volgende gelet te worden:

1Provide the machine's serial number.

2For electrical parts, provide the (schematic) position number, description, article number and

manufacturer's name.

3For mechanical parts, provide the drawing number, position number, article number and

description.

To facilitate the rapid repair of a possible malfunction, we recommend keeping a number of spare

parts in stock.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Matco Attrezzature per l'imballaggio

Matco

Matco A100 Manuale utente

Matco

Matco A700 AW Manuale utente

Manuali Attrezzature per l'imballaggio popolari di altre marche

U-Line

U-Line S-15188 Manuale utente

ITATOOLS

ITATOOLS ITA22 Manuale utente

Fieldpiece

Fieldpiece MG44 Manuale utente

Smart wasp

Smart wasp X300 Manuale utente

U-Line

U-Line S-1135 Manuale utente

Z.R. Tools

Z.R. Tools MS25-1 Manuale utente

Sipromac

Sipromac SIPROVAC 620A Manuale utente

strapex

strapex STR 66 Manuale utente

U-Line

U-Line H-5334 Manuale utente

Imetec

Imetec Q5901 Manuale utente

Transpak

Transpak TP-201 Guida

Lacor

Lacor 69352 Scheda tecnica

Eastey

Eastey EXS-100 Manuale utente

Inova

Inova SV 125 Manuale utente

CombiSteel

CombiSteel 7529.0010 Manuale utente

HUALIAN

HUALIAN HVC-260T/1A Manuale utente

U-Line

U-Line H-2079 Manuale utente

Strapack

Strapack iQ400 Istruzioni operative