Matrix V Series Manuale utente
Version 1.6 V Series © 2013 Matrix Fitness | www.matrixtness.com ENG 1
CAUTION !
Read all precautions and instructions in this manual before using this equipment. Keep this manual
for future reference.
Improper assembly, maintenance or use can void the warranty terms.
V Series
Indoor Cycle
Manufactured by:
Matrix Fitness
Johnson Health Tech Co. Ltd.
No.26, Ching Chuan Rd.
Taya Hsiang, Taichung Hsien
428 TAIWAN, R. O. C.
ENGDEU ESP
Matrix_V-Series_bike_1.6.indd 1 1/11/13 10:15 AM
Version 1.6 V Series © 2013 Matrix Fitness | www.matrixtness.com ENG 2
TABLE OF CONTENTS
Important precautions.............................................................................................................................................................. page 3
Before you begin ..................................................................................................................................................................... page 4
How to assemble the Matrix V Series...................................................................................................................................... page 5-7
Initial install checks.................................................................................................................................................................. page 8
How to adjust the Matrix V Series ........................................................................................................................................... page 9
Pedal strap adjustment............................................................................................................................................................ page 9
Saddle height adjustment........................................................................................................................................................ page 9
Saddle horizontal adjustment ................................................................................................................................................. page 10
Handlebar adjustment ............................................................................................................................................................ page 11
Resistance adjustment ........................................................................................................................................................... page 12
How to move the Matrix V Series ............................................................................................................................................ page 12
Preventative maintenance ...................................................................................................................................................... page 13
Daily maintenance .................................................................................................................................................................. page 13
Weekly maintenance .............................................................................................................................................................. page 13
Bi-Weekly maintenance .......................................................................................................................................................... page 14
Monthly maintenance ............................................................................................................................................................. page 15-16
Belt drive system ..................................................................................................................................................................... page 17
Maintenance activity plan & check lists .................................................................................................................................. page 18-19
Exploded drawings of structural components.......................................................................................................................... page 20-25
Spare part reference list ......................................................................................................................................................... page 26-27
Limited warranty ...................................................................................................................................................................... page 28
Technical specications:
The Matrix V Series is according to EN 957 a Class S product for professional and / or
commercial use. Such training equipment is intended for the use in training areas of orga-
nizations such as tness clubs or sport associations, where access and control is special-
ly regulated by the person who has the legal responsibility.
Foot print: 142 x 54 cm / 56 x 21.25 inch
Weight of bike: 49 kg / 108 lbs
Max saddle height: 115 cm / 45.3 inch
Max handlebar height: 115 cm / 45.3 inch
Max user weight: 130 kg / 287 lbs
The Bike is designed to accommodate most users from 150 to 205 cm / 59.1 to 81.7 inch
body height.
Matrix_V-Series_bike_1.6.indd 2 1/11/13 10:15 AM
Version 1.6 V Series © 2013 Matrix Fitness | www.matrixtness.com ENG 3
IMPORTANT PRECAUTIONS
WARNING!
To reduce the risk of serious injury, read the following important precautions and information before
operating the Matrix V Series.
1. It is the responsibility of the owner to ensure that all users of the indoor cycle are informed of all
warnings and precautions.
2. Operate and maintain the indoor cycle only as described in this manual.
3. Do not operate the indoor cycle until it is properly assembled (see page 5-8).
4. Keep the bike indoors, away from moisture and dust. Do not place the indoor cycle in a garage or
covered patio or near water.
5. Place the indoor cycle on a level surface. To protect the oor or carpet from damage, place a
mat beneath the indoor cycle. Make sure that there is adequate room around the indoor cycle to
mount, dismount, and operate it.
6. Regularly inspect and properly tighten all parts of the indoor cycle as recommended in this
manual. Please replace defective parts immediately and do not use the bike until repair is
performed. Only use original parts from the manufacturer.
7. Children under the age of 14 should only be allowed use of the indoor cycle with parental
consent and guided by a specially trained instructor.
8. The indoor cycle should not be used by persons weighing more than 287 pounds (130 kg).
9. Always wear appropriate athletic clothes and shoes while operating the indoor cycle. Do not wear
loose clothes that could become caught on the indoor cycle or shoes with loose laces.
10. Before using the indoor cycle, make sure that you are familiar with the operation of the indoor
cycle (see pages 8-12).
11. The indoor cycle does not have an independently moving ywheel (wheel); the pedals will
continue to move together with the ywheel until the ywheel stops.
12. Always regulate the ywheel resistance so that your pedaling motion is controlled (see page 12).
13. Keep your back straight while using the indoor cycle; do not arch your back.
14. If you feel pain or dizziness while exercising, stop immediately, rest and cool down.
15. If replacement parts are needed, use only manufacturer supplied parts.
WARNING:
Before beginning any exercise program, consult your physician. This is especially important for
persons over the age of 35 or persons with pre-existing health problems. Read all instructions before
using. Be aware that incorrect or extensive training may result in serious health injuries. The
manufacturer assumes no responsibility for personal injury or property damage sustained by or
through the use of this product.
ENGDEU ESP
Matrix_V-Series_bike_1.6.indd 3 1/11/13 10:15 AM
Version 1.6 V Series © 2013 Matrix Fitness | www.matrixtness.com ENG 4
BEFORE YOU BEGIN
You will nd the production code on the left side of the Matrix
V Series within the lower range of the frame. Please record this number on your
service & maintenance list for easy reference.
Emergency Brake & Resistance Knob
Pedal /
Toe Clip
Chain Guard
Maintenance
Cover
Saddle
Lever
Handle
Adjustment
Lever
Handlebar
Adjustment
Lever
Brake Pad
Flywheel
Transport
Wheel
Leveling
Feet
Dear customer,
Congratulations for selecting the Matrix V Series. The
Matrix indoor cycle offers an impressive array of features designed to enhance cardio-
vascular tness, tone muscles, and develop endurance. Whether users are beginners
or experienced athletes, the Matrix V Series offers workouts that will help users to reach
their individual tness goals.
IMPORTANT: Read this manual carefully before assembling or using the indoor cycle.
If you have questions after reading this manual, please contact your local distributor or
refer to the website www.matrixtness.com. Before reading further, please familiarize
yourself with the parts that are labeled in the drawing below.
Matrix_V-Series_bike_1.6.indd 4 1/11/13 10:15 AM
Version 1.6 V Series © 2013 Matrix Fitness | www.matrixtness.com ENG 5
1
3 4
2
Assure that plastic gasket is placed between
rear stabilizer and frame.
Assure that plastic gasket is placed between
front stabilizer and frame.
Assure that black rubber washer is placed
between upper frame and bolt/washer.
Assure that black rubber washer is placed
between upper frame and bolt/washer.
Please assure that nuts are tightened with signicant strength to minimize loosening during use.
HOW TO ASSEMBLE Matrix V Series
SW 17mm
SW 14mm
3mm hand tight
2x
15mm Pedal
Wrench
1x
ENGDEU ESP
Matrix_V-Series_bike_1.6.indd 5 1/11/13 10:15 AM
Version 1.6 V Series © 2013 Matrix Fitness | www.matrixtness.com ENG 6
HOW TO ASSEMBLE Matrix V Series
SW 17mm
SW 14mm
3mm hand tight
2x
15mm Pedal
Wrench
1x
5 6
7
STOP mark
Make sure the seat is xed properly in
a LEVEL HORIZONTAL position and
securely tightened!
Matrix_V-Series_bike_1.6.indd 6 1/11/13 10:15 AM
Version 1.6 V Series © 2013 Matrix Fitness | www.matrixtness.com ENG 7
9
10 11
Stop mark
SW 17mm
SW 14mm
3mm hand tight
2x
15mm Pedal
Wrench
1x
Pedal marked R installed on right crank (clockwise). Pedal marked L installed on left crank
(counter-clockwise) Pedals must be fastened with signicant strength to avoid loosening
with use of the Matrix V Series.
ENGDEU ESP
HOW TO ASSEMBLE Matrix V Series
8
STOP mark
Matrix_V-Series_bike_1.6.indd 7 1/11/13 10:15 AM
Version 1.6 V Series © 2013 Matrix Fitness | www.matrixtness.com ENG 8
The cycle tune-up must be performed at initial installation of the indoor cycle for optimal performance and
longevity. Please read and follow all instructions below. If the indoor cycle is not installed and tuned as
described, components may wear excessively and the cycle may become damaged. If you have questions
about the installation, please contact us by using by using the website www.matrixtness.com.
Note: Some maintenance procedures require acid, silicone and solvent free spray lubricant
(for example BRUNOX), and White Lithium grease.
1. Make sure that the Matrix V Series is level. If the Matrix V Series rocks on the oor, turn the leveling feet
underneath the front and/or rear stabilizer until the rocking motion is eliminated.
2. Verify emergency brake function to assure that emergency brake functions correctly.
3. Brake pad calibration: turn resistance knob counterclockwise as far as possible (minimum braking effect),
verify that there is a slight separation of the brake pad from ywheel. Brake pad should barely touch the
ywheel when resistance knob is turned counter-clockwise as far as it can go.
4. Apply WD40 or Brunox spray lubricant to the brake pad using the lubrication holes on the plastic part or
the brake pad and externally on the felt pad. Make sure brake pad is thoroughly soaked from end to end
with lubricant spray. Then, wipe the excess off from the ywheel.
* Best Practice: Use a rellable spray bottle lled with non-aerosol acid, silicone and solvent
free spray lubricant purchased by the gallon (3.7 L) at the local hardware store.
5. Apply lithium grease to the threads on the lower end of the brake rod. First, turn the resistance
knob clockwise until it stops. Apply a small amount of white lithium grease to the threads on the
brake rod above the two lock nuts. Then, turn the resistance knob counter-clockwise until it stops.
6. Apply lithium grease on the metal threads of all the adjustment levers.
7. Verify four (4) Allen nuts on RS pulley for tightness. If loose, apply LocTite Threadlocker Blue-242
and retighten.
8. Verify R and L crank arm Allen bolts for tightness. If loose, apply LocTite Threadlocker Blue-242
and retighten.
9. Verify belt tension. Check if belt drive is rmly tightened and does not slip while riding under
resisted load. In case the belt slips, proceed using the adjustment technique as described on page (17).
Please note that a belt drive gear never shows slack. In case of adjustment do not apply too
much tension.
10. Wipe down bike frame with rag moistened with solvent free spray lubricant.
11. Some parts of the cycle may become loose during shipment. Check crank arms, check all exposed
screws, bolts, and nuts, and make sure that they are properly tightened.
Customer Service
1. Provide basic maintenance instructions to client and direct them to the detailed maintenance
instructions (page 18).
2. Sign-off sheet provided to client to conrm explanation of maintenance procedures/manual and
verication of condition of bikes.
INITIAL INSTALL CHECKS
ENGDEU ESP
Matrix_V-Series_bike_1.6.indd 8 1/11/13 10:15 AM
Version 1.6 V Series © 2013 Matrix Fitness | www.matrixtness.com ENG 9
HOW TO ADJUST THE INDOOR CYCLE
The cycle can be adjusted for maximum comfort and exercise effectiveness. The instruc-
tions below describe one approach to adjusting the cycle to ensure optimal user comfort
and ideal body positioning; you may choose to adjust the cycle differently.
Pedal strap adjustment:
Sit on the saddle and position your feet on the pedals, with the balls of your feet
directly above the spindles of the pedals (see the drawing below). Adjust the pedal
straps so the toe clips (cages) are snug but not too tight. Note: In the case of a Bike
being tted with Combi-pedals, the pedals feature toe clips on one surface and SPD
cleats on the opposite surface. If desired, use the shoe cleats with cycling shoes
instead of the toe clips.
Saddle height adjustment:
Sit on the saddle and slowly pedal until the right pedal is in the lowest position. Your knees
should be slightly bent without a dropping of the hips.
To avoid hyper extending your knees, make sure that your legs are not
completely straight.
Please do not adjust
handlebar height beyond
the STOP mark on the stem
and ensure the pop pin is
fully engaged and securely
tightened (see page 7).
Please do not adjust saddle
height beyond the STOP
mark on the stem and
ensure the pop pin is fully
engaged and securely
tightened (see page 7).
Please avoid overtightening the pop pin adjustment knob as this may cause
damage to the vertical aluminum stems.
Matrix_V-Series_bike_1.6.indd 9 1/11/13 10:15 AM
Version 1.6 V Series © 2013 Matrix Fitness | www.matrixtness.com ENG 10
Saddle horizontal adjustment:
Proper horizontal adjustment of the saddle is very important in avoiding injury to the knees.
Sit on the saddle and move the pedals until the crank arms are in horizontal position.
Using your forward most leg as a marker, your kneecap should be directly above the
center of the pedal so that a straight line is created between knee and center of the
pedal (see the dotted line in image below). To adjust the horizontal position of the
saddle, rst dismount the cycle. Next, loosen the rear adjustment knob, slide
the saddle forward or backward as required, and then retighten the knob.
HOW TO ADJUST THE CYCLE
ENGDEU ESP
Matrix_V-Series_bike_1.6.indd 10 1/11/13 10:15 AM
Indice
Altri manuali Matrix Cyclette
Matrix
Matrix R3x-01 Manuale utente
Matrix
Matrix R5X-03 Manuale utente
Matrix
Matrix U3x-01 Manuale utente
Matrix
Matrix R7XE-02 Bike Manuale utente
Matrix
Matrix U5X-04 BIKE Manuale utente
Matrix
Matrix IC-MXEB-01 Manuale utente
Matrix
Matrix U5X-03 Manuale utente
Matrix
Matrix H7X-03 Manuale utente
Matrix
Matrix CXP Manuale utente
Matrix
Matrix U7xi Manuale utente
Matrix
Matrix U7xe-04 Manuale utente
Matrix
Matrix R7XI-01 Manuale utente
Matrix
Matrix R5x Manuale utente
Matrix
Matrix H7XE-05 Manuale utente
Matrix
Matrix U3X-05 Manuale utente
Matrix
Matrix IC7 Manuale utente
Matrix
Matrix Endurance Manuale utente
Matrix
Matrix IC-MXIC7B-02 Manuale utente
Matrix
Matrix R1x Manuale utente
Matrix
Matrix R7xe Istruzioni per l'installazione
