Matrix T50x-02 Manuale utente

Questo manuale è adatto per i seguenti modelli

1

Indice

Altri manuali Matrix Tapis roulant

Manuali Tapis roulant popolari di altre marche

Treadly

Treadly TREADLY 2 Manuale utente

HEALTH ONE

HEALTH ONE Walk Ro Manuale utente

NordicTrack

NordicTrack NTL12941 Manuale utente

NordicTrack

NordicTrack T7.5 S Manuale utente

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Manuale utente

Merax

Merax MS282992 Manuale utente

FYTTER

FYTTER RU-2SX Manuale utente

Precor

Precor 903 Manuale utente

FitLogic

FitLogic freewill d225 Manuale utente

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Manuale utente

Horizon Fitness

Horizon Fitness Adventure 5 Plus Manuale utente

Stamia

Stamia InMotion II Manuale utente

Smooth Fitness

Smooth Fitness EVO 3i Manuale utente

NordicTrack

NordicTrack NETL81810.0 Manuale utente

Schwinn

Schwinn 830/Journey 8.0 Manuale utente

Keys Fitness

Keys Fitness HealthTrainer HT-740T Manuale utente

Spirit

Spirit XT8 Manuale utente

NordicTrack

NordicTrack T 14.0 Treadmill Manuale utente

1

Matrix T50x-02 / T50x-U-02

SERVICE MANUAL

2

TABLE OF CONTENTS

SECTION 1：

：：

：SERIAL NUMBER LOCATION- - - - - - - - - - - - - - - - - - - - - 5 ~ 6

SECTION 2：

：：

：MOVINGTHEUNIT-----------------------------7~8

SECTION 3：

：：

：IMPORTANT SAFETY INSTRUCTIONS- - - - - - - - - - - - - -9 ~ 12

SECTION 4：

：：

：PREVENTATIVE MAINTENANCE- - - - - - - - - - - - - - - - - -13

4.1 Maintenance check list -------------------------------------14

4.2 Recommended cleaning tips ---------------------------------15

4.3 Deck and belt replacement ----------------------------------16

4.4 Check for damaged parts -------------------------- ---------17

4.5 Adjusting the belt -------------------------- --------------18

4.6 Clean the grooves procedures --------------- -----------------19

4.7 Deck re-waxing procedure -----------------------------------20 ~ 21

SECTION 5 : OVERLAY AND WORKOUT DESCRIPTION - - - - - - - - - - 22

5.1 T50x Console description ------------- ----------------------23

5.2 T50x-U Console description ------------- --------------------24

SECTION 6：

：：

：ENGINEERING MODE- - - - - - - - - - - - - - - - - - - - - - - - - - - 25 ~ 28

3

TABLE OF CONTENTS

SECTION 7：

：：

：TROUBLESHOOTING-----------------------------29

7.1 Electrical block diagram -------------------------------------30

7.2 Wire pin definition -----------------------------------------31

7.3 MCB LED instruction------------------------------------- -32~33

7.4 MCB wiring connection-------------------------------------34

7.5 T50x switch setting definition ----------------------------------35

7.6 Error message 0140 / 01A0 / 01A2 troubleshooting ------------------36

7.7 Error message 01A3 troubleshooting ------------------------------37

7.8 Error message 0144 / 02B6 / 02B7 / 02B8 / 01A8 / 02B5 troubleshooting----38

7.9 Error message 0141 troubleshooting------------------------------39

7.10 Error message 02AD troubleshooting ----------------------------40

7.11 Error message 02B2 troubleshooting -----------------------------41

7.12 Error message 02B9 / 02BA/ 02BB / 01AB troubleshooting--------------42

7.13 Error message 04A0 troubleshooting -----------------------------43

7.14 Error message 04B0 troubleshooting -----------------------------44

7.15 Error message 01A4 / 01A5 / 01A6 / 02A7 troubleshooting -------------45

7.16 Error message 02A2 / 0241 troubleshooting ---- --------------------46

7.17 Error message IMMOBILIZED troubleshooting ---------------------47

7.18 How to test Incline motor function troubleshooting--------------------48

7.19 Incline motor jammed and 01A0 troubleshooting ----------------------49

4

TABLE OF CONTENTS

SECTION 8：

：：

：PART REPLACEMENT GUIDE- - - - - - - - - - - - - - - - - - - - - 50

8.1 Removal of plastic shroud ----------------------------------51

8.2 Rear roller removal ---------------------------------------52

8.3 Side rail removal ----------------------------------------53

8.4 Deck Removal/Replacement --------------------------------54

8.5 Deck cushion replacement ----------------------------------55

8.6 Front roller removal---------------------------------------56

8.7 Running belt replacement-----------------------------------57

8.8 Motor control board (MCB) removal ---------------------------58

8.9 Motor Removal------------------------------------------59

8.10 Drive Belt Removal --------------------------------------60

8.11 Incline motor removal/replacement ----------------------------61 ~ 62

8.12 PCB removal/disassembly ----------------------------------63

8.13 Quick key removal/replacement ------------------------------64

8.14 Handlebar removal/replacement ------------------------------65

8.15 PCB software installation SOP -------------------------------66 ~ 71

5

SECTION 1

SERIAL NUMBER LOCATION

6

Matrix T50x Serial Number

Location

7

SECTION 2

MOVING THE UNIT

8

SETTING UP THE TREADMILL

UNPACKING THE TREADMILL

The MATRIX treadmill is inspected before it is packaged. It is shipped in two separate pack- ages:

the frame and the console. Carefully unpack the unit and dispose of the box material.

CAUTION

This unit weights 165 kg / 365 lbs pounds. Be sure to have proper assistance to remove and move the

unit, to avoid injury to the user and the unit.

CONTENTS

Frame :

1.Treadmill Base

2.Console Supports

3.Hardware Fasteners and Washer Bag

Console:

1.Handle Bar Set

2.Console

9

SECTION 3

IMPORTANT SAFETY

INSTRUCTIONS

10

1.2 proper usage

• Do not use the equipment in any way other than designed or intended by the manufacturer. It is

imperative that all Matrix Fitness Systems equipment is used properly to avoid injury.

• Keep hands and feet clear of moving parts at all times to avoid injury.

• Unsupervised children must be kept away from this equipment.

• Do not wear loose clothing while on equipment.

1.3 READ AND SAVE THESE INSTRUCTIONS

This Treadmill is intended for commercial use. To ensure your safety and protect the equipment,

read all instructions before operating the MATRIX treadmill.

1.1 Before getting Started

It is the sole responsibility of the purchaser of Matrix Fitness Systems products to instruct all

individuals, whether they are the end user or supervising personnel, on proper usage of the

equipment.

It is recommended that all users of Matrix Fitness Systems exercise equipment be informed of

the following information prior to its use.

Please leave a 78.75” (2000 mm) x 39.50” (1000 mm) landing zone behind the treadmill. This zone is

to allow easy access to the treadmill and gives the user an easy exit path from the machine. In case of

an emergency, place both hands on the side arm rests to hold yourself up and place your feet onto the

side rails.