MattressJack Basic Series Guida
MattressJack
Consumer Mattress Lifting System
Basic/Premium
March 2020 | Version 1.0
Installation and User Instructions
Black
2
3
A
B
CD
F
E
G
User
Instructions
H
ⒶPVC Air Bladder
ⒷAir Pump
ⒸHand Controller
ⒹAir Hose
ⒺMagnet-activated Reed Switch
ⒻMagnet Control Fob
ⒼPatch Repair Kit
ⒽInstallation and User Instructions
Product elements
E & F are options and may be purchased separately
4
1. Safety instructions
WARNING
Please read and understand this manual and the safety instructions carefully before using this
product. Failure to read and understand the information provided may result in serious injury.
1.1 Explanation of Safety Warnings
DANGER
Danger indicates a hazardous situation that, if not avoided, will result in death or serious injury.
WARNING
Warning indicates a hazardous situation that, if not avoided, may result in death or serious injury.
CAUTION
Caution indicates a hazardous situation that, if not avoided, may result in minor or moderate injury.
NOTICE
Notice indicates information considered important, but not hazard-related
1.2 Intended use and reasonably foreseeable misuse
The MattressJack is intended for use as a device to raise a mattress over a stable and smooth-surfaced
foundation. The MattressJack is suitable for indoor use only.
The MattressJack is not intended to be used:
• Outside, or on any unstable surface.
• Asatoy,snowtoy,trampoline,otationdevice,orlife-savingdevice.
The MattressJack shall only be used in accordance with the instructions described in this manual. Any use
other than that described here is regarded as unintended use.
The MattressJack is not intended for use by children under the age of 12.
1.3 Retaining instructions
Followallinstructions.Thiswillavoidre,entrapment,suocation,electricshocksorotherhazardsthat
may result in damage to property and/or severe injuries. Keep all safety information and instructions for
future reference and pass them on to subsequent users of the product. The manufacturer is not liable
for cases of material damage or personal injury caused by incorrect handling or non-compliance with the
instructions. In such cases, the warranty will be voided. For questions, information, technical assistance or
technical information, please contact:
Ergonomic Lifting Solutions LLC
4400 E Hwy 20, Suite 405
Niceville, FL, USA 32578
www.mattressjack.com
5
DANGER
• The MattressJack should not be used by children
younger than 12 years. The MattressJack is not a
toy.
• Children should be supervised to ensure that
they do not play with the MattressJack.
• Do not use the MattressJack on waterbeds,
adjustable platform beds, hospital-style beds or
inatablebeds.
• NeverlltheMattressJackwithwater.
• Only use the MattressJack indoors. Never use
outdoors.
• Do not use the MattressJack in water. Keep the
MattressJack away from moisture.
• Do not use the MattressJack when there is a
person or a pet on the mattress.
• Do not place any objects on the MattressJack
whenitisdeatedorpartiallyinatedor
deated.Neversit,stand,walkorjumpon
the MattressJack when either partially or fully
inated.
• Do not operate the MattressJack in the presence
of children or pets. Pets and children should
be carefully supervised when operating the
MattressJack. Keep pets and children away the
the MatressJack whenever the MattressJack
isinatedoreitherraisingorloweringthe
mattress.
• Do not use the MattressJack if the air bladder or
the air pump has been exposed to water.
• Do not install or use a damaged MattressJack.
• The MattressJack may only be installed and
used together with the original MattressJack
accessories and components.
• Make sure to place all parts correctly and
according to the instructions. Failure to do
somayaecttheproperfunctioningofthe
MattressJack.
• Unauthorized alterations to the MattressJack
andtechnicalmodicationsarenotpermitted.
• Do not install the MattressJack over uneven
or sharp surfaces that could puncture the air
bladder.
• Do not install the MattressJack where the air
bladder or air hose can be exposed to sharp
edges or surfaces.
• Make sure there is at least 12 inches (30cm)
of free space above the entire mattress when
installing the MattressJack.
• Make sure there is at least 6 inches (15cm) of
free space between a wall or bed frame when
installing the MattressJack.
• Make sure not to damage the MattressJack
when placing any objects under the bed or
when vacuuming or cleaning under the bed.
• DonotinatetheMattressJackwithanything
else besides bedding and pillows on the
mattress.
• TheMattressJackshallonlybeinatedwith
the original MattressJack air pump. Do not use
another air pump, as this may cause injuries or
property damage.
• The MattressJack shall be connected to a
permanent and grounded AC wall socket.
• Theinationanddeationstagesofthe
MattressJack shall be supervised to ensure safe
operation. Immediately pause operation if an
unsafe situation is suspected or realized.
• If the air inlet becomes obstructed by any
object or debris, the MattressJack air pump will
fail to operate properly and there is a risk of
overheating. As a built-in safety feature, the air
pumpwillsafelyandautomaticallyshut-oif
the internal temperature nears or exceeds an
overheated condition. It will remain inoperable
until the air pump returns to a safe operating
temperature. Avoid repeated overheating cycles
as they will shorten the lifespan of the air pump.
• Donotuseanyammablesubstances
(like aerosol tire repair products) on the
MattressJack. The MattressJack may ignite
or explode. Only use the provided glue and
patches to repair a damaged air bladder.
• Onlyqualied,certiedpersonnelmayrepairor
disassemble the MattressJack. Disconnect the
MattressJack from the power supply when you
repair or disassemble the appliance.
• Use only original MattressJack replacement
parts. The use of other parts will result in
voiding the warranty and could lead to injuries.
• Recycle the materials with a recycling symbol.
Put the packaging in applicable containers to
recycle it. Help protect the environment and
human health and to recycle waste of electrical
and electronic appliances. Do not discard the
MattressJack with the household waste. Return
the product to your local recycling facility or
contactyourmunicipaloce.
1.4 Important safety information
6
1
2
2. Installation of the MattressJack
1. Carefully remove the mattress ①from the
foundation ②. Secure the mattress ①in a safe
location.
CAUTION! Always move a mattress
with the assistance of one or more
additional adults. Ensure that people,
pets, furniture, children and infants,
and wall surfaces are not subject to
potential injury or harm if the mattress
unintentionally falls over or shifts
position.
2. Make sure the surface of the mattress
foundation is clean and in good repair.
3. If the foundation is an open slat ②or wire
frame ③foundation, then place one (or
more) panels of corrugated plastic sheeting,
corrugated cardboard, nished plywood, or
similar material ①to establish a foundation
surface free of gaps and open voids.
2
3
1
1
2
3
1
1
7
4. Unfold the air bladder ①smoothly and evenly
over the foundation ②surface. Center the air
bladder ①symmetrically on the foundation ②
surface.
5. Locate the air valve at the head of the bed.
NOTICE Make sure the “THIS SIDE UP”
label ③faces upwards. Make sure the
air inlet is at the head of the bed.
6. Set the switch ①on the pump base ②to the
size of your bed: King or Queen.
3
2
1
21
8
2
1 3
7. Choose one of the following options:
i. Attach the hand controller ①to the air
pump ②, or
ii. Attach the magnet-activated reed switch ③
to the air pump ②.
NOTICE Make sure to tighten the
connector into the hub.
NOTICE Make sure that the air pump is
NOT connected to AC Power.
8. HAND CONTROLLER: Locate the Hand
Controller ②in any convenient location.
9. REED SWITCH: Choose a discrete mounting
location that enables the Magnet-activated
Reed Switch ①to be hidden from view. Ensure
that the selected location enables placement
of the Magnet Control Fob 4 cm (1.5 in) or
less from the Magnet-activated Reed Switch
①.Removethewhitelmbackingfrom
the adhesive foam surface on the Magnet-
activated Reed Switch ①. Firmly press to
secure the Magnet-activated Reed Switch ①
in the desired location.
NOTICE The magnet-activated reed
switch installs easily behind or beneath
any wooden, plastic or laminated
surfaces. Do not install behind any
iron, steel or nickel surfaces as this will
interruptthemagneticeld.
1
2
1
2
9
12
3
11. Place the air pump ①in the desired
location. Make sure that the air inlet ②
of the air pump is clear from obstructions.
Carefully guide the air hose ③to valve
ttingoftheairbladderattheheadofthe
bed.
NOTICE Do not kink or crush the air
hose.
10. Attach and secure the air hose ①to the air
pump ②.
2
1
10
2
1
12. Attach and secure the air hose ①to the air
bladder ②.
Thetshouldbesnug.Oncefully
inserted, gently tighten the screw collar
withyourngers.Donotover-tighten.
Do not use tools. Do not use tape or
glue.
13. Make sure the air bladder is symmetrically
positioned in the center of the foundation.
14. Route the air hose and all cords so that
they are not subject to crushing, kinking,
or pinching. Locate all components so that
they do not create a tripping hazard.
15. Carefully return the mattress ①back onto
the foundation ②.
CAUTION! Always carry out lifting with
more than one person.
2
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Manuali Sistema di sollevamento popolari di altre marche
Genie
Genie Z-60/34 Manuale utente
Screen Technics
Screen Technics INTERFIT Vertical Up Lift Manuale utente
Mortuary Lift
Mortuary Lift ULTIMATE 1000 Manuale utente
Custom Equipment
Custom Equipment Hy-Brid 3 Series Manuale di programmazione
Custom Equipment
Custom Equipment Hy-Brid Lifts 2 Series Manuale di programmazione
Hy-Brid Lifts
Hy-Brid Lifts HB-P3.6 Manuale di programmazione
