Maxell MP-JW351E Manuale utente
1QM01001-1
LCD Projector
MP-JW351E/MP-JW401E
MP-JX351E
User's Manual (detailed)
Operating Guide
Thank you for purchasing this projector.
►Before using this product, read all manuals for this product.
Be sure to read Safety Guide rst. After reading them, store them in a safe
place for future reference.
WARNING
NOTE
Various symbols are used in this manual. The meanings of these symbols are
described below.
About this manual
WARNING
CAUTION
This entry warns of a risk of serious personal injury or even
death.
This entry warns of a risk of personal injury or physical damage.
Please refer to the pages written following this symbol.
NOTICE This entry notices of fear of causing trouble.
• The information in this manual is subject to change without notice.
• The illustrations in this manual are for illustrative purposes. They may dier
slightly from your projector.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
2QM01001-1
Contents
Introduction ...............3
Features ......................3
Checking the contents of package
....3
Warnings, Cautions, and Notices ...4
Part names ...................16
Projector, Control panel, Ports,
Remote control
Setting up ................19
Arrangement ..................19
Connecting with your devices
.....23
Connecting to a power supply
.....28
Using the security bar and slot ....29
Remote control ............30
Installing the batteries ...........30
About the remote control signal ...31
Changing the frequency of remote
control signal ..................31
Using as a simple PC mouse & keyboard
32
Power on/off ..............33
Turning on the power ...........33
Turning o the power ...........34
Operating ................35
Adjusting the volume ............35
Temporarily muting the sound .....35
Selecting an input signal .........36
Selecting an aspect ratio .........36
Limiting OSD display ............37
Adjusting the projector's elevator
....38
Adjusting the zoom and focus .....39
Using the automatic adjustment feature
. . 40
Correcting the distortion .........41
Using the magnify feature ........42
Temporarily freezing the screen ...43
Temporarily blanking the screen ...43
Using the menu function .........44
Indication in OSD(On Screen Display),
Containing items of each menu
EASY MENU. . . . . . . . . . . . . . . 47
PICTURE menu ............49
IMAGE menu ..............52
INPUT menu ..............55
SETUP menu ..............59
AUDIO menu ..............64
SCREEN menu.............65
OPTION menu .............70
SECURITY menu ...........79
Maintenance ..............85
Cleaning and replacing the air lter . . 85
Other care ....................87
Troubleshooting ...........89
Related messages .............89
Regarding the indicator lamps ....91
Resetting all settings ............95
Phenomena that may be easy to
be mistaken for machine defects
...95
Specications ............100
3QM01001-1
Introduction
Introduction
• Keep the original packing materials, for future reshipment. Be sure
to use the original packing materials when moving the projector. Use special
caution for the lens.
NOTE
The projector provides you with the broad use by the following features.
Checking the contents of package
ü Adopting laser diodes as light source, realized a compact product with
smallness and lightness.
ü This projector has a variety of I/O ports that supposedly cover for any
business scene. The HDMI port can support various image equipment which
have digital interface to get clearer pictures on a screen.
ü Can provide DC5V/2A power supply from USB TYPE A connector to use a
media player or a streaming device without external power supply, which
enables the projector to be used in more various opportunities.
Please see the Contents of package section in the User’s Manual (concise)
which is a book. Your projector should come with the items shown there. Contact
your dealer immediately if any items are missing.
Features
►Keep small parts away from children and pets. Take care
not to put in the mouth. If swallowed, consult a physician immediately for
emergency treatment.
WARNING
4QM01001-1
Introduction
Warnings, Cautions, and Notices
►Never use the projector if a problem should occur.
• Otherwise it can cause re or electric shock.
• If any of the following abnormalities occur, urgently stop using the product and
unplug it from the power outlet:
-
The product is giving o smoke or strange smell, or making a strange sound.
- A foreign object or liquid has entered the product.
- The product was impacted by being dropped or hit.
- The product, or the power cord or cables connected is damaged.
• After making sure that the smoke or odor has stopped, contact your dealer.
•
The power outlet should be close to the projector and easily accessible. Never
repair the product by yourself because it is dangerous.
►Use special caution for children and pets.
• Incorrect handling could result in re, electrical shock, injury, burn or vision
problem.
• Keep the battery and small parts away from children and pets. Take care that
they should not swallow.
• Install the product away from children and pets. If swallowed, consult a
physician immediately for emergency treatment.
►Do not let any things or any liquids enter to the inside of the product.
• Penetration of liquids or foreign objects could result in re or electrical shock. If
ammable air or liquid goes into the projector, it may cause re or injury due to
explosion caused by catching re.
• Do not put anything wet, small, containing air or liquid around the projector. Do
not use aerosols or sprays to or around the product.
• To avoid penetration of foreign objects, do not put the projector into a case
or bag together with any thing except the accessories of the projector, signal
cables and connectors.
• If liquids or foreign object should enter the projector, immediately turn o the
power switch, disconnect the power plug from the power outlet and contact
your dealer.
WARNING
(continued on next page)
5QM01001-1
Introduction
Warnings, Cautions, and Notices (continued)
►Do not get the product wet.
• It could result in a re, an electric shock, and/or malfunction to the projector.
• Do not place the projector near water, such as in a bathroom, kitchen, or
poolside.
• Do not place the projector outdoors or by the window.
►Do not place the projector on an unstable surface. Install the projector in
a stable position. Do not give the projector any shock or impact.
• If the projector should be dropped and/or broken, it could result in an injury,
and continued use could result in re or electrical shock.
• If the projector is shocked, immediately turn o the power switch, disconnect
the power plug from the power outlet and contact your dealer.
• Remove all the attachments including the power cord and cables from the
projector when carrying the projector.
• Use the caster brakes placing the projector on a stand with casters.
• For special installation such as ceiling mounting, be sure to consult your dealer
beforehand.
• Install the projector in the way specied in "Setting up", "Arrangement", and
"Adjusting the projector's elevator".
• Do not put the projector on its side, front or rear position.
► Do not place the projector in the following place where oils or chemicals
are used:
- near the kitchen which oil smoke comes from
- oils such as machine oils or aromatic oils are used
- smoke or bubbles for a show or a performance are used
- solvents, medicines, or detergent volatiles or adheres
- corrosive gas is generated
Do not use adhesive such as threadlocker, lubricant and so on.
• Oils adhere to the product due to oil smoke, resulting in re, electrical shock, or
malfunction.
• Degradation of plastic harms the product, resulting in injury, re, electrical
shock, or malfunction due to falling from the ceiling, wall, or high mounted
position.
WARNING
(continued on next page)
6QM01001-1
Introduction
Warnings, Cautions, and Notices (continued)
►Never disassemble and modify.
• The product contains high voltage components and/or laser light-emitting part
beyond the scope of Class 1 (IEC60825-1). Modication and/or disassembly of
the product could result in re, electrical shock, or injury to eyes or skin.
•
Do not open or remove any portion of the product unless the manuals direct it.
• For internal maintenance, leave it to your dealer or their service personnel.
►Be cautious of high temperatures of the projector.
• High temperatures are generated when the light source is lit.
• If combustibles or aerosol sprays are around the projector, it may cause re or
injury due to catching re or rupture.
• Do not install the projector near thermally conductive or ammable things.
• Do not touch around the exhaust vents during use or just after use, since it is
too hot.
►Never look through the lens or openings when the light source is on.
• A strong light is emitted when the projector’s power is on. Do not look into the
lens and the openings on the projector while the light source is on, since the
projection ray may cause a trouble on your eyes.
►When you turn o the projected image while the light source is on,
follow the specied procedure.
• If you wish to have a blank screen while the light source is on, use the BLANK
function.
• Keep any object away from concentrated projection light beam. Blocking the
beam by something causes high temperature and could result in re or smoke.
WARNING
(continued on next page)
7QM01001-1
Introduction
Warnings, Cautions, and Notices (continued)
►Use the accessory cable or a designated type cable for the connection.
• If you use a power cord or a signal cable that are not comply with the
specication, it causes re, electric shock, malfunction, or radio wave
interference.
• Only use the power cord that came with the projector.
• Consult your dealer to properly use connection cables or connectors other than
coming with the projector.
• The power cord that came with the projector is only for this projector. Do not
use it for other devices.
►Clean the power plug by using a soft and dry cloth.
• If dust or metal adheres to or around the AC (power terminal) of this projector
or the power plug, it may cause re or electric shock.
►Insert the power plug into a power outlet rmly.
• Use extra caution when connecting the power cord, as incorrect or faulty
connections may result in re and/or electrical shock.
• Incorrect power supply could result in re or electrical shock.
• Be sure to plug the power cord into an outlet that has specied voltage.
• Avoid using a loose, unsound outlet or contact failure.
• Do not distribute the power supply to multiple devices. It may overload the
outlet and connectors, loosen the connection, or result in re, electric shock or
other accidents.
►Be sure to connect with ground wire.
• Connect the ground terminal of AC inlet of this unit with the ground terminal
provided at the building using the correct power cord; otherwise, re or electric
shock can result.
• If you connect the ground wire to the outlet, it may cause re or electric shock.
WARNING
(continued on next page)
8QM01001-1
Introduction
Warnings, Cautions, and Notices (continued)
►Do not damage the power cord, cables, and connectors.
• If you keep using a damaged the power cord or cables, it can cause a re or
electrical shock.
• If it is damaged, consult your dealer to get a new one.
►Do not touch the power cord with a wet hand.
• It results in electric shock.
►Before cleaning, turn o and unplug the projector.
• Neglect could result in re or electrical shock.
• Before cleaning, turn o and unplug the projector.
• Take right care of the projector by following the manual.
►Be careful in handling the battery.
• Improper use may result in battery explosion, cracking or leakage, which could
result in re, injury and/or pollution of the surrounding environment. Children or
pets may swallow the battery because it is small.
• If swallowed, consult a physician immediately for emergency treatment.
• If you observe battery leakage, wipe out the leakage and then replace a
battery. If the leakage adheres to your body or clothes, rinse well with water
immediately. If it entered your eye, wash it with clean water immediately and
consult a physician.
• Be sure to use only the specied batteries.
• Do not allow the battery in a re or water. Avoid re or high-temperature
environment. Keep the battery in a dark, cool and dry place.
• Keep the battery away from children and pets.
• Obey the local laws on disposing a battery.
► Do not put anything on top of the projector or hang anything from the
projector.
• Placing anything on the projector could result in loss of balance or falling, and
cause an injury or damage.
• Do not attach nor place anything on the projector unless otherwise specied in
the manual.
WARNING
(continued on next page)
9QM01001-1
Introduction
Warnings, Cautions, and Notices (continued)
► Do not place the projector in a place where it can be hot nor block the
projector's ventilation openings.
• The projector may shut down automatically, or may malfunction due to high
internal temperature if it is placed in a place where it can be hot or ventilation
does not operate normally.
• The heat could have adverse inuence on the cabinet of the projector and
other parts.
• Place the projector in a cool place with sucient ventilation.
• Do not place the projector in direct sunlight or near hot objects such as heaters.
• Do not place the projector where the air from an air conditioner or similar unit
will blow on it directly.
• Do not put the projector or the accessories in a microwave oven.
• Do not stop up, block nor cover the projector's vent holes.
• Do not place anything around the projector that could be sucked in or stuck to
the projector's intake vents.
• Do not place the projector on carpet, cushions or bedding.
► Avoid placing the projector in smoky, humid, or dusty place, or in a place
where it can be aected by soil salinity.
• Accumulations of dust inside the projector result in re or malfunction.
• Do not place the projector near a smoky, humid or dusty place (ex. a smoking
space, a kitchen, a beach, etc.).
• Do not place the projector near humidiers. Especially for an ultrasonic
humidier, chlorine and minerals contained in tap water are atomized and could
be deposited in the projector causing image degradation or other problems.
• Do not place the projector outdoors.
CAUTION
(continued on next page)
10 QM01001-1
Introduction
Warnings, Cautions, and Notices (continued)
►Avoid Magnetism.
• Magnetic objects may cause interruption of the projector's internal mechanical
performance which may interfere with cooling fans speed or stopping, and may
cause the projector to completely shut down.
• The projector may shutdown automatically or may malfunction if its internal
temperature is too high.
• Avoid any magnetic contact that is not shielded or protected on or near the
projector itself.
► Unplug the projector from the power outlet if the projector is not being
used.
• Unplug the power cord for complete disconnection.
• If you leave the projector with the power cord connected to the outlet, it can
result in a re or an electric shock.
►Do not use the product during electrical storms.
• If the projector is used while a lightning strike occurs, it may result in re or
electric shock.
• If there is a possibility that a lightning strike occurs, stop using the product and
unplug it from the power outlet.
CAUTION
(continued on next page)
Altri manuali per MP-JW351E
1
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali Maxell Proiettore
Maxell
Maxell MP-WU5603 Manuale utente
Maxell
Maxell MC-WU5505 Manuale utente
Maxell
Maxell MC-EX5001 Manuale utente
Maxell
Maxell CP-X8150 Manuale utente
Maxell
Maxell MP-WU5503 Manuale utente
Maxell
Maxell MP-TW4001 Documento tecnico
Maxell
Maxell LP-EU5002 Manuale utente
Maxell
Maxell CP-WX8255 Manuale utente
Maxell
Maxell MC-WU8451 Manuale utente
Maxell
Maxell MP-EU5002 Manuale utente
Maxell
Maxell MP-WU8101W Manuale utente
Maxell
Maxell MC-EX3051 Manuale utente
Maxell
Maxell MC-WU8461 Manuale utente
Maxell
Maxell MP-WU8801W Documento tecnico
Maxell
Maxell MC-AW3506 Documento tecnico
Maxell
Maxell MC-EU5001 Manuale utente
Maxell
Maxell MP-EU5002 Documento tecnico
Maxell
Maxell MC-AW3506 Manuale utente
Maxell
Maxell MC-WX5506M Manuale utente
Maxell
Maxell MC-AW3506 Manuale utente
