Maximum MR-2000 Manuale utente
MR-2000
Enjoy the Music
DIGITAL FM, INTERNET OG DAB RADIO
WITH AUDIO MEDIA STREAMING
Instruction Manual
ii
Safet Warnings
Please read before installation.
If MR-2000 has been moved from a cold place to a warm place, D N T plug it in for 2-
3 hours (e.g. from a cold car boot to a warm room). There is a possibility that moisture
may have condensed in the MR-2000 and this can cause damage to your MR-2000 if
taken into use at once. To avoid damage please unpack your MR-2000 and allow it to
stand in room temperature for 2-3 hours before use. This will cause moisture to
evaporate and prevent unnecessary damage to your MR-2000.
DO ensure that the mains plug is easily accessible.
Covers - Do not remove any fixed covers as this may expose you to dangerous voltage.
Weather - It is advisable to unplug an external aerial during a thunderstorm.
Damage - Never use your MR-2000 if it is damaged in any way. Always place your MR-
2000 on a flat level surface avoiding any surface which may be subject to strong
vibration.
Temperature - Avoid extreme temperatures, either hot or cold. Place your MR-2000
well away from heat sources such as radiators or gas/electric ovens.
DO NOT use this product in tropical climates.
Moisture - Do not allow your MR-2000 to be exposed to rain, moisture or dust. If you
spill any liquid onto your MR-2000 it can cause serious damage. In such case switch it
off at the mains immediately. Contact your store without delay.
CAUTION - Do not open any covers and do not repair yourself. Qualified personnel
must carry out repair work.
2
Contents
Package Content 3
MR-2000 - Quick Start Guide 4
What you need before you can use your MR-2000 ................................................4
Controls verview (a) .............................................................................................5
Controls verview (b) ............................................................................................. 6
Connecting to wired network...................................................................................7
Step 1 - Power ...........................................................................................7
Step 2 – Choose LAN Setting ....................................................................7
Step 3 – Enter Internet Radio mode .......................................................... 7
Step 4 – Enter Network..............................................................................8
Connecting to wireless network ..............................................................................8
Step 1 – Choose WLAN Setting ................................................................8
Step 2 – Select Your Region......................................................................8
Step 3 – Select Your Region......................................................................9
Step 4 – Enter Network..............................................................................9
Choosing a station ................................................................................................12
Changing the Station Information .........................................................................13
Station Updates..................................................................................................... 14
DAB peration Mode............................................................................................ 15
FM peration Mode .............................................................................................. 16
Setting Station Presets ......................................................................................... 17
Selecting a Preset station .....................................................................................17
Music Player peration Mode...............................................................................18
Clock Settings ....................................................................................................... 19
Daylight savings....................................................................................................20
S stem settings 20
Network setup ....................................................................................................... 20
Language .............................................................................................................. 21
Factory reset ......................................................................................................... 21
Software Updates..................................................................................................22
SW Version and Radio ID .....................................................................................22
General Operation 23
Register................................................................................................................. 23
Requesting a Station.............................................................................................23
Returning To Main Menu ...................................................................................... 23
Volume .................................................................................................................. 23
Appendix 24
Step 1: Set Up Media Sharing in Windows Media Player 11................................24
Step 2: Play Music on the MR-2000. ....................................................................25
Set Up Media Sharing in MAC S........................................................................26
Troubleshooting 27
Specification 28
3
Package Content
Main unit
Remote control
and
batteries
AC/DC Adapter
UTPUT:6VDC 800mA
Cable
Audio cable
Coaxial cable
User
manual
4
MR-2000 - Quick Start Guide
What ou need before ou can use our MR-2000
LAN Setting:
• Make sure the internet connection is ready and the network settings are available for LAN (ADSL
or Cable Modems are highly recommended).
• To find the MR-2000’s LAN MAC address, please follow this procedure:
Main menu System setup Internet setup View settings MAC Address
Wireless LAN Setting:
• A broadband Internet connection.
• A wireless access point (Wi-Fi) connected to your broadband Internet, preferably via a router.
• If your wireless network is configured to use Wired Equivalent Privacy (WEP) or Wi-Fi Protected
Access (WPA) data encryption then you need to know the WEP or WPA code so you can get the
MR-2000 to communicate with the network.
• If your wireless network is configured for trusted stations you will need to enter the MR-2000’s
MAC address into your wireless access point. To find the MR-2000’s MAC address use menu
items:
Main menu System setup Internet setup View settings MAC Address
• To enter the MAC address into your wireless access point, you must read the instructions
supplied with the wireless access point.
Before you continue, make sure that your wireless access point is powered and connected to your
broadband Internet, or that your LAN cable setting is K. To get this part of the system working you
must read the instructions supplied with the wireless access point and LAN connecting.
5
Controls Overview (a)
UNIT FRONT VIEW
UNIT REAR VIEW
Control Internet Radio DAB,DAB+,FM mode Media Pla er
Press to turn the MR-2000 on/off
Go back to previous menu page
Press to change the source between Internet Radio, Music Player, DAB and FM
Press to confirm
Press and hold to access menu
FM mode, press to auto-seek stations
Press to move forward
Press and hold to increase volume
Press to move downward
Press and hold to decrease volume
6
Controls Overview (b)
1 SCAN
2 MUTE
3 STANDBY/ N
4 INF
5 S URCE
Upward
Downward
Backward
Forward
7
K
8 Volume -
9 Volume +
Previous Track
Play/Pause
Stop
10
Next Track
11 Preset buttons 1-9
Note: item10, designed for Media player
7
Connecting to wired network
Step 1 - Power
First, connect an adaptor to your MR-2000 and ensure the Power LED light is on. Hereafter the MR-
2000 can be switched on or off with the button.
Note: Make sure that LAN cable is connected.
Step 2 – Choose Wired Setting
1. Press or and select <SYSTEM SETTINGS>. Press OK to confirm, and then press OK again.
2. Press or and select < MANUAL SETTINGS >. Press OK to confirm and then press OK again.
3. Press or and select < DHCP ENABLE >. Press OK to confirm.
Step 3 – Enter Internet Radio mode
1. Press to go back to <MAIN MENU> subdirectory. Press or and select <INTERNET RADI >
and then press OK to confirm.
8
2. Alternatively press SOURCE until <INTERNET RADI > is shown.
Step 4 – Enter Network
Your MR-2000 will now connect to a Network automatically. After a few seconds, the following will
appear on the screen:
or
If ‘Failed to connect’ message appears, please try the following:
a. Check your router, see if it is working normally or not;
Check your LAN cable. Make sure it is not damaged, and that it is connected correctly.
Connecting to wireless network
Step 1 – Choose Wireless Setting
1. Look up Step 2 “Choose Wired Setting” on page 6 . Press or and select <WIRELESS>, and then
press OK to confirm.
2. Press or and select <DHCP ENABLE>. Press OK to confirm.
Note: 1. you can also simply disconnect LAN cable from the LAN socket before connecting to the network.
. You can, at any point, press to go back to the previous screen.
Step 2 – Select Your Region
1. Press to go back to <MAIN MENU> subdirectory. Press or and select <INTERNET
RADI >, and then press OK to confirm.
Alternatively press SOURCE until <INTERNET RADI > is shown.
9
2. “Region choice” menu appears:
Step 3 – Select Your Network
1. Press or until your region is shown. Press OK to confirm and then your MR-2000 will ask you to
enter your network.
Step 4 – Enter Network
1. In some cases the MR-2000 may find more than one network. Press or to navigate through the
name list, and then press OK when the name of your network is displayed.
2. If you do not need a password to enter your network (WEP/WPA), the MR-2000 will connect to the
network and display:
3. If a WEP/WPA password is required, the MR-2000 will now ask you to type the WEP/WPA code and
will display the password entry screen:
a. Press or to navigate through the alpha-numeric character list. Press OK to select the
appointed character.
Indice
Altri manuali Maximum Radio
