Maximum TS-4000 Manuale utente
English User manual
Dansk Brugervejledning
Svenska Användarhandbok
MAXIMUM TS-4000
CX CI+ PVR
Item no.: 7857
MAXIMUM TS-4000
CX CI+ PVR
Copyright © Kjaerulff 1 Digital A/S
www.kjaerulff1.com
Certicate of Compliance
We Kjaerulff 1 Digital A/S
C.F. Tietgens Boulevard 19
5220 Odense SØ
Declare that the product: MAXIMUM TS-4000 CX CI+ PVR (item 7857),
is in conformity with:
RoHS 2002/95/CE
Electromagnetic Compatibility (EMC) Directive 2004/108/EC
Standards: EN55013: 2001+A1:2003+A2:2006, EN 61000-3-2: 2006,
EN61000-3-3: 1995 + A1:2001 + A2:2005 + A3:2008, EN 55020: 2007
Low Voltage Directive 2006/95/EC
Standards: EN60065: 2002 + A1:2006
Copyright
Content of this manual is not to be copied, used or translated in part or as a whole
without prior consent in writing except approval of ownership of copyright and
copyright law.
Trademark acknowledgement and license notice
DVB - Digital Video Broadcasting
Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996)
Declaration of Conformity No. 4296, 22nd August 2006
Dolby Digital
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
HDMI, the HDMI Logo and High-Denition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
1
ENGLISH
Index
1. SAFETY WARNING ......................................................................................... 2
2. QUICK SETUP ................................................................................................. 4
3. GENERAL FEATURES .................................................................................... 6
4. HOW TO CONNECT YOUR RECEIVER ......................................................... 7
5. HARDWARE DESCRIPTION: ..........................................................................
6. WATCHING TV .............................................................................................. 13
7. MENU OPERATION ....................................................................................... 18
8. EDIT CHANNELS ........................................................................................... 1
. INSTALLATION .............................................................................................. 21
10. SETTINGS ................................................................................................... 23
11. MULTIMEDIA (only with connected and operational external HDD) ............ 27
12. COMMON INTERFACE ............................................................................... 2
13. CONAX SMARTCARD READER ................................................................. 2
14. SYSTEM ...................................................................................................... 30
15. TROUBLESHOOTING ................................................................................. 31
16. MANUFACTURER INFORMATION ............................................................. 32
2
ENGLISH
1. SAFETY WARNING
This product has been manufactured to comply with international safety
standards. Please read the following safety precautions carefully.
MAINS SUPPLY: 0-260V AC 50/60Hz
Operate this product only from the type of power supply indicated on the
marking label. If you are not sure of the type of power supplied to your home,
consult your local power company.
Disconnect the product from the mains before you start any maintenance or
installation procedures.
OVERLOADING: Do not overload a wall outlet, extension cord or adapter as
this may result in electric fire or shock.
LIQUID: The product should not be exposed to liquid of any kind. In addition,
no objects filled with liquid should be placed on the apparatus.
CLEANING: Disconnect the product from the wall outlet before cleaning. Use
a light damp cloth (no solvents) to dust the product.
VENTILATION: The slots on top of the product must be left uncovered to
allow proper airflow into the unit.
- Do not stand the product on soft furnishings or carpets.
- Do not stack electronic equipment on top of the product.
ATTACHMENTS: Do not use any unsupported attachments as these may be
hazardous or cause damage to the product.
CONNECTION TO THE AERIAL: Disconnect the product from the mains
before connecting or disconnecting the cable from the aerial. Failure to do so
can damage the aerial.
CONNECTION TO THE TV: Disconnect the product from the mains before
connecting or disconnecting the cable from the TV. Failure to do so can
damage the TV.
EARTHING: The aerial cable must be buried in the ground.
LOCATION: Place the product indoors to avoid exposing it to lightning, rain or
sun.
- Do not place it near a radiator or heat register.
- Make sure it has more than 10cm clearance from
- Do not block the openings with any object, and do not place the product on a
bed, sofa, rug, or other similar surface.
- If you place the product on a rack or a bookcase, ensure that there is
adequate ventilation and that you have followed the manufacturer’s
instructions for mounting.
- Do not place the product on an unstable cart, stand, tripod, bracket, or table
where it can fall. A falling product can cause serious injury to a child or adult,
and serious damage to the appliance.
3
ENGLISH
LIGHTNING, STORM o NOT IN USE: Unplug the product from the wall
outlet and disconnect the antenna during a thunderstorm or when left
unattended and unused for long periods of time. This will prevent damage to
the unit due to lightning and power-surges.
EXTRANEOUS OBJECTS: Do not insert anything through the openings in
the unit, where they can touch dangerous voltage points or damage parts.
REPLACEMENT of PARTS: Replacement of parts may only be made by
service technician specified by the manufacturer.
WARNING
To avoid damage of the powe co d o plug:
- Do not modify or process the power cord or plug arbitrarily.
- Do not bend or twist the power cord.
- Make sure to disconnect the power cord holding the plug.
- Keep heating appliances as far as possible from the power cord in order to
prevent the cover vinyl from melting.
- The main plug shall remain readily operable.
To avoid elect ical shock:
- Do not open the main body.
- Do not insert metal or inflammable objects inside the product.
- Do not touch the power plug with wet hands.
- Disconnect the power cord in case of lightning.
To avoid damage of p oduct:
- Do not use the product when it is out of order. If you continue to use the
product when defective, serious damage can be caused to it. Make sure to
contact your local product distributor if the product is out of order.
- Do not insert metal or alien substance into the slots for the modules or
smartcards.
It may cause damage to the product and reduce its life span.
The socket-outlet shall be installed nea the equipment and shall be
easily accessible.
4
ENGLISH
2. QUICK SETUP
1. Check accessories
Please check the giftbox for completeness of accessories. Included should be:
Receiver, Remote Control, User Manual, 2 Batteries
2. Connect the Receiver to the TV Set
Connect your Receiver with your TV Set. Details can be found in the User
Manual under chapter 4. How to connect you eceive .
3. Connect the Receiver with the Satellite Antenna
Connect your Receiver with your Satellite Antenna. Details can be found in
the User Manual under chapter 4. How to connect you eceive .
4. Switch on the Receiver and TV Set
Switch on the AC-Power Switch on the rear side of the Receiver and then
press the Standby button in the Front of the Receiver Front (see User Manual
for more details: Chapter 5.2 F ont Panel and 5.3 Rea Panel)
5. Insert the Batteries
Insert the 2 Batteries into the battery case on the underside of the Remote
Control. Please make sure that the Battery + and - Poles are correctly aligned.
6. Settings in the OSD Menu
After the Receiver has booted it will display the On-Screen Menu on your TV
Set. Should this not be the case, please check the connections as well as the
settings of your TV Set.
Please use the key on your
Receiver-Remote Control to choose the
Menu language and then please confirm
with the
key. After this please choose the
time zone and follow the instructions on
the screen to set-up your antenna and
perform a channel search
5
ENGLISH
Information about changes to the channel list please see chapter 8. Edit
Channels in the User’s Manual.
Under chapte 5.1 you can make yourself familiar with the functions of your
remote control
Under chapte 6 the TV- as well as Recording- and Playback-Functions of
your receiver are described
6
ENGLISH
3. GENERAL FEATURES
• SD / HD support (MPEG4 AVC/H.264)
• User friendly Installation
• 1 Common Interface Slot
• 1 Conax CAS7 Smartcard-Reader
• USB PVR Function (by using external HDD)
Time Shift Mode (by using external HDD)
1 Channel recording, 2nd Channel watching on same TP (by
using external HDD)
• Event Timer by EPG
• High Definition Video output : HDMI and YPbPr
• S/PDIF Dolby
• Subtitle support : OSD & VBI insertion for TV
• 8-Digit VF Display
• Channel sorting by FTA, CAS, Satellite, Alphabetic & Network
• Satellite Scan - Simultaneous Scan with 10 Satellites
• EPG : Now and Next and 7 days EPG
• Variable Input Symbol Rate (1-45 Msps)
• Video output resolution: 576p, 720p, 1080i, 1080p
• User selectable output resolution
• Multi language OSD
• Fast Channel Change
• Memory for up to 10,000 TV & Radio Channels
• PIG (Picture In Graphic)
• 8 Favorite List & Unlimited Programs per each
• Channel Edit Function
- Move, Delete, Favorite Edit
- Parental Lock, Channel Rename, Channel Skip
• Manual PID/ Satellite & TP/ Network Scan
• S/PDIF – optical (Digital Audio or Dolby AC3 stream out)
• Unicable, DiSEqC 1.2 and USALS Compatible
• Software Upgrade via USB
• Multifeed function for Operator Subchannels
7
ENGLISH
4. HOW TO CONNECT YOUR RECEIVER
Please note: HD Signals are not transferred via RCA-Video or SCART – For
HDTV Signals and also for the best quality on SDTV please use an HDMI
cable where possible.
4.1 Connecting the Receive to TV by using HDMI and SCART-Cable
a. Connect the coaxial cable to “LNB IN” terminal marked at the rear of
MediaBox.
b. Connect the terrestrial Antenna to the port marked “ANT IN”
c. Connect the SCART connector marked “TV” to the respective
SCART port of the TV.
d. If the TV has a HDMI input, connect the product & TV using a HDMI
cable.
8
ENGLISH
4.2 Connecting the Receive to you TV by using RCA cable
a. Connect the coaxial cable to “LNB IN” terminal marked at the rear of
MediaBox.
b. Connect the terrestrial Antenna to the port marked “ANT IN”
c. Connect the RCA cable to port “Audio L/R” of MediaBox to the
respective RCA port of TV.
4.3 Connecting the Receive to you TV by using Component cable
a. Connect the coaxial cable to “LNB IN” terminal marked at the rear of
MediaBox.
b. Connect the terrestrial Antenna to the port marked “ANT IN”
c. Connect the Component cable to port “YPbPr” and “Audio L/R” of
MediaBox to the respective RCA ports of your TV Set.
d. Select Component in Menu “AV Setting”.
Indice
Lingue:
Altri manuali Maximum Ricevitore
Maximum
Maximum 7974 Manuale utente
Maximum
Maximum TS-3000 CX-CI Manuale utente
Maximum
Maximum S-2000 FTA PVR Manuale utente
Maximum
Maximum 7846 Manuale utente
Maximum
Maximum T-105 FTA PVR Manuale utente
Maximum
Maximum S-6002 CI HD Manuale utente
Maximum
Maximum XO-4200 Hybrid Manuale utente
Maximum
Maximum XO-110T Manuale utente
Maximum
Maximum T-1300 FTA Manuale utente
Maximum
Maximum T-102 FTA Manuale utente
