MaxJax M7K Manuale utente

5240 Willis Road.

Theodore, AL, 36582

Telephone: (844) 629-5291

maxjax.com

MaxJax™ Portable Mid-Rise Lift

Operation and Maintenance Manual

Manual P/N 5900268 — Manual Revision A4 — July 2022

Model:

• M7K

US Design Patent No. 8.256.577 B2

US Design Patent No. 9.150.395 B2

Designed and engineered by BendPak Inc. in Southern California, USA. Made in China.

⚠

DANGER

IMPORTANT SAFETY INSTRUCTIONS,SAVE THESE

INSTRUCTIONS!

Read this entire manual thoroughly before

installing, operating, servicing or maintaining this Lift

Failure to follow the instructions and safety precautions in this

manual can result in serious injury or death. Make sure all other

operators also read this manual. Keep the manual near the product

for future reference.

By proceeding with setup and operation,

you agree that you fully understand the contents of this

manual and assume full responsibility for product use

Original Instructions

in the English

Language

Manual. MaxJax™ Portable Mid-Rise Lift, Operation and Maintenance Manual, Manual Part Number 5900268,

Manual Revision A4, Released July 2022.

agree that: you will give full attribution to BendPak Inc., you will not make changes to the content, you do not gain

any rights to this content, and you will not use the copies for commercial purposes.

Trademarks. MaxJax, the MaxJax logo, BendPak, and the BendPak logo are registered trademarks of

BendPak Inc. All other company, product, and service names are used for identification only. All trademarks and

registered trademarks mentioned in this manual are the property of their respective owners.

Limitations. Every effort has been made to ensure complete and accurate instructions are included in this

manual. However, product updates, revisions, and/or changes may have occurred since this manual was

published. BendPak reserves the right to change any information in this manual without incurring any obligation for

equipment previously or subsequently sold. BendPak is not responsible for typographical errors in this manual.

You can always find the latest version of the Operation and Maintenance Manual for your product on

the MaxJax website.

Warranty. The MaxJax warranty is more than a commitment to you: it is also a commitment to the value of your

new product. Contact your nearest BendPak dealer or visit www.maxjax.com/warranty for full warranty

details.

Safety. Your product was designed and manufactured with safety in mind. However, your safety also depends

on proper training and thoughtful operation. Do not install, operate, maintain, or repair the unit without reading and

understanding this manual and the labels on the unit;

do not use your Lift unless you can do so safely!

Owner Responsibility. In order to ensure operator safety and maintain your product properly, it is the

responsibility of the product owner to read and follow these instructions:

• Follow all setup, operation, and maintenance instructions.

• Make sure product setup and use conforms to all applicable local, state, and federal codes, rules, and

regulations, such as state and federal OSHA regulations and electrical codes.

• Read and follow all safety instructions. Keep them readily available for operators.

• Make sure all operators are properly trained, know how to safely operate the unit, and are properly supervised.

• Do not operate the product until you are certain all parts are in place and operating correctly.

• Carefully inspect the product on a regular basis and perform all maintenance as specified.

• Service and maintain the unit only with approved replacement parts.

• Keep all instructions permanently with the product and make sure all labels are clean and visible.

•MaxJax makes no promises, guarantees or assurances that our products meet any state, county, federal or international

mandated permit, license, code, standard, certification, or any other mandate other than what is listed or shown on

MaxJax website(s), or any MaxJax or Dannmar or BendPak online or published catalog. Not all MaxJax lift models meet

the standards as prescribed by ANSI/ALI ALCTV-(current edition) or ANSI/UL 201. Consult www.autolift.org for a

complete list of lift models that meet ANSI/ALI ALCTV-(current edition) or ANSI/UL 201, or contact MaxJax via

maxjax.com/support. Buyer assumes full responsibility for any state, county, federal or international mandated

permit, license, code, standard, certification, or any other mandate required related to the installation and/or operation of

any MaxJax, Dannmar or BendPak product. MaxJax, Dannmar, Ranger and BENDPAK will not be responsible for any

charges, fines, liens, or other levies imposed on the Buyer related to any special or regional structural, seismic or any

other building code and/or codes such as the Uniform Building Code (UBC), International Building Code (IBC), or any

other state, county, federal or international mandated permit, license, code, standard, certification, or other mandate, law,

rule, regulation or directive by any other agency, government, administrations, or corporations whether state, county,

federal, or international mandated.

•Only use the Lift if it can be used safely!

MaxJax™ Portable Mid-Rise Lift 3P/N 5900268 — Rev. A4 — July 2022

Unit Information. Enter the Model Number, Serial

Number

, and the Date of Manufacture from the label on

your unit

. This information is required for part or

warranty issues.

Model:

Serial:

Date of

Manufacture:

MaxJax™ Portable Mid-Rise Lift 4P/N 5900268 — Rev. A4 — July 2022

Table of Contents

Introduction 4 Troubleshooting 20

Shipping Information 4 Labels 21

Safety Considerations 5 Part Drawings 23

Specifications 8 ALI Store 28

Operation 9 Maintenance Log 29

Maintenance 19

Introduction

MaxJax is a portable Mid-Rise Lift with a small footprint designed for low-ceiling garages. MaxJax can

raise Vehicles up to 7,000 lbs. (3,175 kg). CE Approved when installed with the CE Safety Release Kit.

This manual is mandatory reading for all MaxJax users

, including anyone who sets up,

operates, maintains, or repairs them. Keep this manual on or near the device so that anyone who uses

or services it can read it.

⚠DANGER Be very careful when setting up, operating, maintaining, or repairing this equipment;

failure to do so could result in property damage, product damage, injury, or (in very

rare cases) death. Make sure only authorized personnel operate this equipment. Do

not make modifications to the unit; this voids the warranty and increases the

chances of injury or property damage. Make sure to read and follow the instructions

on the labels on the unit.

If you are having issues, refer to the Troubleshooting section of this manual for assistance.

Technical support and service is available from your dealer, on the Web at maxjax.com/support, by

email at [email protected], or by phone at (844) 629-5291.

Shipping Information

Your equipment was carefully checked before shipping. Nevertheless, you should thoroughly inspect

the shipment

before

you sign to acknowledge that you received it.

When you sign the bill of lading, it tells the carrier that the items on the invoice were received in good

condition.

Do not sign the bill of lading until after you have inspected the shipment.

If any of the

items listed on the bill of lading are missing or damaged, do not accept the shipment until the carrier

makes a notation on the bill of lading that lists the missing and/or damaged goods.

If you discover missing or damaged goods

after

you receive the shipment and have signed the bill of

lading, notify the carrier at once and request the carrier to make an inspection. If the carrier will not

make an inspection, prepare a signed statement to the effect that you have notified the carrier (on a

specific date) and that the carrier has failed to comply with your request.

It is difficult to collect for loss or damage after you have given the carrier a signed bill of lading. If this

happens to you, file a claim with the carrier promptly. Support your claim with copies of the bill of

MaxJax™ Portable Mid-Rise Lift 5P/N 5900268 — Rev. A4 — July 2022

lading, freight bill, invoice, and photographs. Our willingness to assist in helping you process your claim

does not make us responsible for collection of claims or replacement of lost or damaged materials.

Safety Considerations

Read this entire manual thoroughly before installing, operating, servicing or

maintaining this Lift

Do not install or operate the product until you are familiar with all

operating instructions and warnings. Do not allow anyone else to operate it until they are familiar

with all operating instructions and warnings.

⚠WARNING California Proposition 65.This product can expose you to chemicals including

styrene and vinyl chloride which are on the list of over 900 chemicals identified by

the State of California to cause cancer, birth defects, or other reproductive harm.

Always use this product in accordance with BendPak Dannmar’s instructions. For

more information, visit www.p65warnings.ca.gov.

IMPORTANT SAFETY INSTRUCTIONS!

SAVE THESE INSTRUCTIONS!

1. Read all instructions.

2. Care must be taken as burns can occur from touching hot parts.

3. Do not operate equipment with a damaged cord or if the equipment has been dropped or

damaged – until it has been examined by a qualified service person.

4. Do not let a cord hang over the edge of a table, bench, or counter or come in contact with hot

manifolds or moving fan blades.

5. If an extension cord is necessary, a cord with a current rating equal to or more than that of the

equipment should be used. Cords with a current rating less than the equipment may overheat.

Care should be taken to arrange the cord so that it will not be tripped over or pulled.

6. Always unplug the equipment from the electrical outlet when not in use. Never use the cord to pull

the plug from the outlet. Grasp the plug and pull to disconnect.

7. Let the equipment cool completely before putting away. Loop cord loosely around equipment

when storing.

8. To reduce the risk of fire, do not operate in the vicinity of open containers of flammable liquids

(gasoline).

9. Adequate ventilation should be provided when working on operating internal combustion engines.

10. Keep hair, loose clothing, fingers, and all parts of body away from moving parts.

11. To reduce the risk of electric shock, do not use on wet surfaces or expose to rain.

12. Use only as described in this manual. Use only BendPak recommended attachments.

13. ALWAYS WEAR SAFETY GLASSES. Everyday eyeglasses only have impact resistant lenses, they

are not safety glasses.

14. To reduce the risk of injury, close supervision is necessary when this product will be used around

children.

15. To reduce the risk of injury,

never

attempt to lift more than the rated capacity. Refer to loading

instructions.

MaxJax™ Portable Mid-Rise Lift 6P/N 5900268 — Rev. A4 — July 2022

16. The Lift uses electrical energy; if your organization has Lockout/Tagout policies, make sure to

implement them after connecting the Lift to a power source.

17. Refer to markings for proper load on electrical receptacles.

18. Only operate your Lift between temperatures of +41°F to +104°F (+5°C to +40°C).

19. The Lift should

only

be operated by authorized personnel. Keep children and untrained personnel

away from the Lift.

20. Do not make any modifications to the Lift; this voids the warranty and increases the chances of

injury or property damage.

21. Do not use the Lift while tired or under the influence of drugs, alcohol, or medication.

22. Consider the work environment. Keep the work area clean. Cluttered work areas invite injuries.

Keep areas well lit.

23. Always make sure the Lift is secured on Safety Locks before attempting to work on or near a

Vehicle.

24. Make a thorough inspection of the product at least once a year. Replace any damaged or severely

worn parts, decals, or warning labels. Replace worn or damaged parts with BendPak or BendPak

approved parts and assemblies only.

25. BendPak recommends referring to the ANSI/ALI ALIS Standard Safety Requirements for

Installation and Service for more information about safely installing, using, and servicing your Lift.

26. The MaxJax M7K Lift is a Mid-Rise Service Lift.

Use it only for its intended purpose.

27. You

must

wear OSHA-approved (publication 3151) personal protective equipment at all times

when installing, using, maintaining, or repairing the Lift. Leather gloves, steel-toed work boots, eye

protection, back belts, and hearing protection are

mandatory

28. Keep loads balanced on the Lift Arms at all times. Clear the area immediately if a Vehicle is in

danger of falling off the Lift.

29. Do not make any modifications to the Lift. Modifications void the warranty and increases the

chances of injury or property damage. Do not modify any safety-related features in any way.

30. Make sure all operators read and understand this Installation and Operation Manual. Keep the

manual near the Lift at all times.

31. While handling a Hydraulic Cylinder or a Hydraulic Hose,

always

wear gloves. In rare cases, a

needle-like stream of hydraulic fluid (even at low pressure) can penetrate fingers, hands, or arms;

such a puncture can feel like a bite, electric shock, or a needle prick. While it may seem like a

minor issue, any amount of Hydraulic Fluid injected into the human body is a serious issue. Anyone

suffering such a puncture wound should be

immediately

taken to a hospital emergency room to

determine the extent of the injury. Explain the circumstances of the injury to the attending

physician, including what kind of Hydraulic Fluid was involved. Do not assume a puncture wound

that could have been caused by Hydraulic Fluid is a minor issue; it could be life threatening.

32. MaxJax is portable, so you may move it to different mounting locations around your workspace;

however, when the Lift is in use, it

must

be anchored in place.

33. Make sure the Lift Controls are dry, clean, and free from grease and oil.

34. Make a visual inspection of the product before using it. Check for damage, worn or missing parts.

Do not use the product if you find any issues. Instead, take it out of service, then contact your

dealer, email [email protected], visit maxjax.com/support, or call (844) 629-5291.

35. Make a thorough inspection at least once a year. Replace any damaged or severely worn parts,

decals, or warning labels.

MaxJax™ Portable Mid-Rise Lift 7P/N 5900268 — Rev. A4 — July 2022

Symbols

Following are the symbols used in this manual:

⚠DANGER Calls attention to an immediate hazard that will result in injury or death.

⚠WARNING Calls attention to a hazard or unsafe practice that could result in injury or death.

⚠CAUTION Calls attention to a hazard or unsafe practice that could result in minor personal

injury, product, or property damage.

NOTICE Calls attention to a situation that, if not avoided, could result in product or property

damage.

Tip Calls attention to information that can help you use your product better.

Liability Information

BendPak Inc. assumes no liability for damages resulting from:

• Use of the product for purposes other than those described in this manual.

• Modifications to the equipment without prior, written permission from BendPak Inc.

•Injury or death caused by modifying, disabling, overriding, or removing safety features.

• Damage to the equipment from external influences.

• Incorrect operation of the equipment.

MaxJax™ Portable Mid-Rise Lift 8P/N 5900268 — Rev. A4 — July 2022

Specifications

Model M7K

Lifting capacity 7,000 lbs. / 3,175 kg

Maximum capacity front axle 3,500 lbs. / 1,587 kg

Maximum capacity rear axle 3,500 lbs. / 1,587 kg

Max Load per Arm 1,750 lbs. / 794 kg

AOverall Height

(Hydraulic Cylinders at full height)

89.5" / 2,273 mm

BColumn Height 64" / 1,629 mm

CTypical Width (edge of Base Plates) 105" – 135" / 2,667 mm – 3,429 mm

DArm Reach (min)

26" / 658 mm

E Arm Reach (max) 40" / 1,016 mm

FMinimum Pad Height 5.25" / 137 mm

GMaximum Lifting Height (with Adapter) 50" / 1,270 mm

Maximum Lifting Height (with Pad) 47.25" / 1,204 mm

Safety Locks 7

Post Weight 300 lbs. / 136 kg

Raising/Lowering Time*45 seconds

Motor** 110/220 VAC, 50/60 Hz, 1 Ph

*Lowering is much slower with no Vehicle on the Lift.

Must specify at time of purchase.

Specifications subject to change without notice.

MaxJax™ Portable Mid-Rise Lift 9P/N 5900268 — Rev. A4 — July 2022

Operation

This section describes how to operate your MaxJax.

⚠DANGER Automotive Lifts are dangerous tools when used by inexperienced or impaired

operators. When you even hear the words “Automotive Lift,” your brain should

automatically remember that lifting a

Vehicle is a serious endeavor with life-

threatening risks

. Focus on what you are doing.

Operating the MaxJax Safely

⚠WARNING Your safety is dependent on reading, understanding, and implementing these

Safety Rules.

Do not skip over them—read them carefully and follow

them; your life could literally depend on it!

Do the following

before

you raise a Vehicle on your MaxJax, do the following each time:

•Check the Lift. Walk all the way around the Lift, checking for any missing, heavily worn, or

damaged parts. Do not operate the Lift if you find any issues; instead, take it out of service, then

contact your dealer, email [email protected],or call (844) 629-5291.

•Check the area. Keep the area around and under the Lift clean and free of obstructions;

anything that could impact the raising or lowering of the Vehicle. Do not forget to check

above

the

Lift. Remove obstructions. The MaxJax is intended for indoor use and has an operating ambient

temperature range of +41° to +104°F (+5° to +40°C).

Outdoor installations are prohibited

•Check the operators. Make sure everyone who is going to operate the Lift has been trained in

its use, has read the labels on the unit, and has read the manual. Only the operator at the Controls

should be within 30 feet of the Lift while it is moving. Do not allow children to operate the Lift. Do

not allow anyone under the influence of drugs, alcohol, or medication to operate the Lift. Do not

allow any unauthorized personnel to operate the Lift.

•Check for safety. Make sure everyone who is going to be walking near the Lift is aware of its

presence and takes appropriate safety measures. Only put Vehicles on the Lift. When raising a

Vehicle, do not leave it until it is

engaged

on a Safety Lock. When lowering the Lift, do not leave it

until it is on the ground.

•Check the Vehicle. Never exceed the Lift’s weight rating. Do not allow people inside a Vehicle

you are going to raise. Make sure the Vehicle is not overbalanced on either end or either side. You

must use the factory-recommended Lifting Points for the Vehicle. Never raise just one side, one

corner, or one end of a Vehicle. Refer to the Lifting it Right: A Safety Manual from ALI and Vehicle

Lifting Points for Frame Engaging Lifts guide shipped with your Lift.

⚠WARNING A complete pre-operation inspection is required before using this equipment.

⚠WARNING The Hydraulic Hoses and connections must be inspected before any attempt to

raise a Vehicle is made.

⚠WARNING Always promptly clean any Hydraulic Fluid spills. If a leak is the source of the spill,

lockout the Lift to prevent use until the Hydraulic System is repaired.

MaxJax™ Portable Mid-Rise Lift 10 P/N 5900268 — Rev. A4 — July 2022

Hydraulic System Warnings

⚠WARNING Failure to observe these precautions can result in serious personal injury, including,

in rare cases, death.

⚠WARNING Do not run your Power Unit without Hydraulic Fluid; it will be damaged.

⚠WARNING All Hydraulic Hose fittings must be inspected before any attempt is made to raise a

Vehicle.

⚠WARNING Do not attempt to connect or disconnect Hydraulic Hoses while equipment is

loaded or while the Hydraulic System is under pressure.

⚠WARNING Keep the Hydraulic System clean; keep the Quick-Connect Fittings free of debris.

⚠WARNING Keep bare hands away from Hydraulic Fluid; always wear gloves when handling

Hydraulic Cylinders or Hydraulic Hoses.

⚠WARNING Before applying power to the Hydraulic system, systematically verify all hydraulic

connections are tight, including fittings, hoses, and auxiliary port plugs. Inspect for

pinched or damaged Hydraulic Hoses and replace before operation.

⚠WARNING When handling Hydraulic Fluid, observe the safety instructions from the

manufacturer.

⚠WARNING This Hydraulic Power Unit cannot be run continuously. The motor is not rated for

continuous duty.

⚠WARNING The MaxJax is a Hydraulicly Balanced Lift. The Hydraulic Hoses supplying the Lift

Cylinders must be the same length within 5%. If a hose is replaced verify the length

is within 5% of the original MaxJax Hydraulic Hose.

⚠WARNING This Power Unit contains a Hydraulic Pump capable of developing extremely high

pressure. A Pressure Relief Valve is used to set the pressure at the desired level.

Tampering with, adjusting, modifying, or removing the Relief Valve is extremely

dangerous. Only trained Hydraulics technicians, using calibrated Hydraulic Pressure

Gauges to assure the proper pressure setting is achieved, should make

adjustments to the Relief Valve.

Additional Operating Information

Keep the following in mind when operating your MaxJax:

•Use it only on a hard, flat surface. MaxJax is portable; if you move it to a new location, make sure

the location has a hard, flat surface.

•Always verify that you have the proper overhead clearance.

•

Visually inspect the Lift before each use

. Do not use it if you find any damage or severe

wear to the Lift components.

•Both Posts

must

be anchored in place when the Lift is in operation.

Indice

Altri manuali MaxJax Sistema di sollevamento

MaxJax

MaxJax M6K Manuale utente

MaxJax

MaxJax M6K Manuale utente

Manuali Sistema di sollevamento popolari di altre marche

morse

morse 82H-124 Manuale utente

Braun

Braun NL955 Series Manuale utente

haacon

haacon 1889.10 Manuale utente

Protekt

Protekt AT 252 Manuale utente

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 Manuale utente

Nova Technology International, LLC

Nova Technology International, LLC NAS Series Manuale utente

Genie

Genie Z-60/34 Manuale utente

Screen Technics

Screen Technics INTERFIT Vertical Up Lift Manuale utente

Mortuary Lift

Mortuary Lift ULTIMATE 1000 Manuale utente

Custom Equipment

Custom Equipment Hy-Brid 3 Series Manuale di programmazione

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Manuale di programmazione

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 Manuale di programmazione

BERG

BERG BeNomic EasyLeaf Manuale utente

Powermate

Powermate LiftGate LG-3 Manuale utente

Snorkel

Snorkel TM12 Series Manuale utente

Terberg

Terberg OMNIDEKA Manuale utente

Harmar Mobility

Harmar Mobility AL625 Istruzioni operative

Rotary

Rotary SPO16 Manuale utente