MAXPhotonics MFS Series Manuale utente
MFS Series - M BOX
Maxphotonics Co.,Ltd.
5
Copyright Notation
Copyright © Maxphotonics Co ., Ltd ( here after referred to as Maxphotonics). All
rights reserved. You may not copy, modify, transmit or publish this publication,
in any form, in any media or by any means, without the prior written permission
of Maxphotonics, except as allowed under applicable copyright laws. Permitted
copies shall bear the same copyright and proprietary notices that were contained
on the ori ginal version.
Maxphotonics believes that the information provided is accurate and reliable;
however Maxphotonics makes no warranty, representation,expression or
implication that this document can be used as reference in other occasions.
Furthermore, Maxphotonics does not assume responsibility for any infringement
of patents or other rights of third parties due to use of the information contained
in this document. Maxphotonics shall not be liable for errors contained in this
document or for direct or indirect damages of relevant equipment.
Maxphotonics and the Maxphotonics Logo are registered trademarks of
Maxphotonics Co., Ltd., and the Logo does not break any regulations of
Trademark law.Maxphotonics grants no rights for patent or other intellectual
property mentioned herein.
All information contained in this document is subject to change and revision
without notice.
Subject to change without notice.
Maxphotonics Co.,Ltd.
Address: Maxphotonics Industrial Park, 3rd Furong Road,
Furong Industrial Area, Shajing, Baoan, Shenzhen, China.518125
E-Mail: [email protected]
http://en.maxphotonics.com
1
Preface
Thank you for using the MFS Series pulsed fiber laser products. We compile
this document for you in order that the laser is used and maintained properly.
Due to the limited level of the writers, coupled with time constraints, there are
some careless mistakes in this document,and your understanding will be much
appreciated. Thank you again for using Maxphotonics' products.
Please take time to read and understand this User’s Guide and familiarize
yourself with the operating and maintenance instructions before you use the
product. We recommend that the operator read the Section titled “Safety
Information” prior to operating the product.
This User’s Guide should stay with the product to provide you and all future
users and owners of the product with important operating, safety and other
information.
We identify the parts to which you need to pay special attention in the document
with underscore. Please notice those information to prevent the unnecessary
damages.
2
Company Prole
Found in 2004, Maxphotonics is one of the first fiber laser manufacturers in
China. It is also the first in China to realize independent intellectual property
rights and vertical integration in the core technologies of ber lasers and optical
devices. One of the national high-tech enterprises. Maxphotonics has developed
into an internationally renowned laser manufacturer that develops, manufactures
and sells fiber lasers and core optical components. It is the second largest
domestic ber laser manufacturer in the domestic market.
Maxphotonics specializes in the research, development, production and
sales of ber lasers, including pulsed ber lasers, continuous ber lasers and
direct semiconductor lasers. It also implements pump sources, combiners,
fiber gratings, isolators, laser output heads, and stripping. Optical devices
such as molds, acousto-optic modulators, and pattern matchers are produced
autonomously. Products are widely used in marking, engraving, cutting,
drilling, cladding, welding, surface treatment, rapid prototyping and additive
manufacturing processes.
More informations，please visit our website：
http://en.maxphotonics.com
3
CONTENT
Chapter 1 Characteristic Description …………………………………… 5
Chapter 2 General Safety Information …………………………………… 6
1-Safety Conventions …………………………………………………………… 6
2-Laser Protection ……………………………………………………………… 7
3-General Safety Instructions ………………………………………………… 8
4-Additional Safety Information ……………………………………………… 11
Chapter 3 Product Description ……………………………………………… 12
1-Features………………………………………………………………………… 12
2-Laser Model Designation Codes …………………………………………… 12
3-Certication …………………………………………………………………… 13
Chapter 4 Specication ……………………………………………………… 14
1-Characteristic Parameters …………………………………………………… 14
2-Computer Conguration ……………………………………………………… 15
3-Structural Layout ……………………………………………………………… 16
4CONTENT
Chapter 5 Using Instruction ………………………………………………… 17
1-Interface function description ……………………………………………… 17
2-DB 26 Pins Interface Denition ……………………………………………… 18
3-Button Function Description ………………………………………………… 23
4-Software operating manual ………………………………………………… 23
Chapter 6 Service and Maintenance ……………………………………… 24
1-Maintenance Notes …………………………………………………………… 24
2-Service Statements …………………………………………………………… 25
Chapter 7 Warranty Statements …………………………………………… 26
1-General Clauses ……………………………………………………………… 26
2-Warranty Limitations ………………………………………………………… 26
5
MFS Series is one of the Maxphotonics outstanding products. Its appearance
has revolutionary significance for the integration of high-speed and high-
resolution laser marking system.
Compact, stand-alone, easy-to-use design that can be integrated directly into
the user's device. Low power consumption, practical and durable design for
laboratory and market applications.
Laser light exhibits unique characteristics that may pose safety hazards.
Therefore, the laser light can’t be normally associated with other light sources,
and all operators and people near the laser must be aware of these special
hazards.
In order to ensure the safe operation and optimal performance of the product,
please follow all warnings and safety instructions in this guide during process of
operation, maintenance and service.
For ensuring the safety of operators, operators are urged not to open the
equipment privately at all times. There are no user serviceable parts, equipment
or assemblies associated with this product. Lasers of unauthorized disassembly
shall not be subject to warranty.
Chapter 1
Characteristic Description
6
Chapter 2
General Safety Information
1-Safety Conventions
All safety warning symbols during operating process of the laser include:
SYMBOLS DESCRIPTION
WARNING: Refers to a potential Electrical Hazard to
human body. It requires a procedure that, if not correctly
followed, may result in bodily harm to you and/or others.
Do not proceed beyond the WARNING sign until you
completely understand and meet the required conditions.
CAUTION：Refers to a potential hazard on product. It
requires a procedure that, if not correctly followed, may
result in damage to the product or components. In order
to ensure normal use of equipment, do not violate the
requirement of the CAUTION sign.
WARNING:Refers to a potential Laser Hazard.The symbol
represents laser radiation. The symbol is pasted on laser
output end.
NO SYMBOL
IMPORTANT：Refers to any information regarding the
operation of the product. Please do not overlook this
information.
7
Chapter 2 General Safety Information
NOTE :
◎ This device is classified as a high power Class IV laser instrument. It
may emit up to 20W average power near 1060nm wavelength. This level
of light may cause damage to the eye and skin. Despite the radiation
being invisible, the beam may cause irreversible damage to the retina.
Laser safety eyewear is not provided with this instrument, but must be
worn at all times while the laser is operational. Use appropriate laser safety
eyewear when operating this device. The manufacturer of the laser system
is responsible for the safety compliance according to the applicable
standards and regulations.
2-Laser Protection
1.Laser Protection Requirements
You must wear the safety protective glasses while operating the laser, and
rationally select the safety protective glasses according to the lasing wavelength
of the laser. If the device is a tunable laser or Raman product, it emits light
over a range of wavelengths and the end user should conrm the laser safety
eyewear used protects against light emitted by the device over its entire range
of wavelength.
2.Laser Protective Equipment Suppliers
Maxphotonics recommends material or equipments provided by following laser
protective equipment suppliers for you, including LaserVision USA, Kentek
Corporation, Rochwell Laser Industries, etc. All the supplier information is
provided by Maxphotonics only for the convenience to use, so Maxphotonics
assumes no responsibility for any problem caused by using the products of
abovementioned suppliers.
8Chapter 2 General Safety Information
3-General Safety Instructions
In order to ensure the safe operation and optimal performance of the
product, please follow these warning and cautions in additionto the other
contained elsewhere in this document.
1.Specular Reflection
There are often numerous secondary laser beams produced at various angles
in the output port of the laser. These divergent beams are produced when the
primary beam of laser reects off a smooth surface, and they are called specular
reflections. Although these secondary beams may be less powerful than the
total power emitted from the primary beam, the intensity may be great enough to
cause damage to the eyes and skin as well as surface of materials.
WARNING:
◎You must exercise caution to avoid/minimize specular reflections as these
laser radiations are invisible!
2.Safety Instructions of Accessories
WARNING :
◎This device has an output optical head connected to the laser with a fiber
cable. Please, be careful dealing with the output head.
3.Optical Operating Instructions
We strongly recommend that you read the following procedures before operating
the laser:
1.Never look directly into the laser output port when the power is turned on.
2.Avoid positioning the laser and all optical output components at eye level.
3.Ensure that all personal protective equipment is suitable for the output power
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali MAXPhotonics Stampante
