McConnel PT6 Guida all'applicazione

Publication 474

April 2005

Part No. 41570.74

Revision 16.03.06

PT6, PT8 & PT9

PASTURE TOPPERS

Standard & Offset Models

Operation & Parts Manual

McCONNEL LIMITED

Temeside Works

Ludlow

Shropshire SY8 1JL

England

Telephone: 01584 873131

www.mcconnel.com

E.C MACHINERY DIRECTIVE

98/37/EC

CE DECLARATION OF CONFORMITY

We hereby certify that the machinery stipulated below complies with all the relevant provisions

of the EC Machinery Directive and the National Laws and Regulations adopting this Directive.

Machine Description…. Mounted In-Line Toppers

Make/ Model …………….PT6, PT8 & PT9

Manufacturer: LSM Engineering LTD

Address: Ballymacken, Portlaoise, Co. Laois. (IRELAND)

Is in conformity with the following other Directives and Standards;

Directive 98/37/EC – Machinery Directive

Directive 93/9 EEC – “CE Marking Directive”

Harmonized Standards applied;

EN 292 pt1:1991 - Safety of Machinery - Basic concepts, general principles for design

EN 292 pt2:1991 - Safety of Machinery - Technical Principles and specifications

EN 60204-1:1993 - Safety of Machinery - Electrical equipment of machines

EN 1050:1996 - Safety of Machinery - Principle of Risk Assessment

Signed Noel Graham

Date February 2004

Name Noel Graham

Position Production Manager

We reserve the right to make changes or improvements at any time without

incurring any obligation to make such changes on products sold previously.

LIST OF CONTENTS

Page No.

OPERATION SECTION

INTRODUCTION 1

Features 2

Specifications 3

SAFETY SECTION 4

Safety Information 4

Machine Decals - Location 8

Machine Decals – Identification 9

MACHINE FITTING 10

Tractor Requirements 10

Tractor Preparation 10

Tractor Attachment 11

Driveline Attachment 11

OPERATION 13

Cutting Speed 13

Cutting Height 14

Cutting Height Adjustment 14

Transportation & Work Positions – Offset Model 15

Starting and Stopping the Machine 16

Worksite Checks and Procedures 16

MAINTENANCE 18

Lubrication Points 18

Gearbox Lubrication 18

Driveline Lubrication 19

Driveline Shield Removal 20

Blade Servicing 20

Blade Sharpening 21

Blade Removal 21

Blade Carrier Removal 21

Blade Carrier Installation 21

MACHINE REMOVAL 17

Detachment of the Machine 17

Machine Storage 17

TROUBLESHOOTING 22

General Troubleshooting 22

PTO Shaft Troubleshooting 23

Gearbox Troubleshooting 24

PARTS SECTION 26

Main Frame – PT6 Model 27

Main Frame – PT8 & PT9 Standard Models 28

Main Frame – PT8 Offset Model 29

Chassis – PT8 Offset Model 30

Blade Carrier Assembly – PT6 Model 31

Blade Carrier Assembly – PT8 & PT9 Standard Models 32

Blade Carrier Assembly – PT8 Offset Model 33

Machine Decals 34

INTRODUCTION

McCONNEL PT SERIES MOWERS - Medium Duty Pasture Toppers

Although designed primarily for the ‘topping’ of agri pastures the machines may also be used for

‘topping’ sports grounds and local council areas. These machines should never be used for

topping set-aside.

Our machines are designed with care and built with quality materials by skilled workers. Proper

assembly, maintenance and operating practices, as described in this manual, will help the

owner/operator get years of satisfactory service from the machine.

The purpose of this manual is to familiarise the owner/operator with the machine, and offer

guidance to ensure it is operated both safely and correctly for its designated task.

The parts section is designed to familiarise the owner/operator with replaceable parts on the

machine - this section provides exploded assembly drawings of the machines components,

illustrating each piece and identifying its part number.

Careful use, timely service and the fitting of genuine parts will save extensive repairs and costly

downtime. The operation and maintenance sections of the manual train the owner/operator how

to work the machine correctly and attend to appropriate maintenance tasks. The trouble

shooting guide helps diagnose difficulties with the machine and offer solutions to any problems.

Safety is of primary importance to the owner/operator and to the manufacturer. The first section

of this manual includes a list of safety messages that, if followed, will help protect the operator

and bystanders from injury or death. Many of these messages will be repeated throughout the

manual. The owner/operator/dealer should know these messages before attempting assembly

or maintenance and to be aware of the hazards associated with the operation of this machine

during assembly, use, and maintenance.

FEATURES

PT6 MODEL

◘Three point linkage mounted.

◘Working width of 1.8m.

◘Cutting height from 24.2mm to 114.2mm.

◘540-RPM PTO Shaft drive.

◘Shear pin protection.

◘Single rotor.

◘Semi-Offset cutting position.

◘Easy height adjustment.

PT8 MODEL

◘Three point linkage mounted.

◘Working width of 2.5m.

◘Cutting height from 24.2mm to 114.2mm.

◘540-RPM PTO Shaft drive.

◘Shear pin protection.

◘Twin rotors.

◘Easy height adjustment.

PT8 OFFSET MODEL

◘Three point linkage mounted.

◘Working width of 2.5m.

◘Cutting height from 24.2mm to 114.2mm.

◘540-RPM PTO Shaft drive.

◘Shear pin protection.

◘Twin rotors.

◘Easy height adjustment.

◘Right hand offset cutting.

◘Safety Breakaway System.

PT9 MODEL

◘Three point linkage mounted.

◘Working width of 2.75m.

◘Cutting height from 24.2mm to 114.2mm.

◘540-RPM PTO Shaft drive.

◘Shear pin protection.

◘Twin rotors.

◘Easy height adjustment.

SPECIFICATIONS

Description

PT6 Model

PT8 Model

PT9 Model

Cutting Width

1.8m

2.5m

2.75m

HP Requirement

35 HP

40 HP

45 HP

Weight

290 Kg

480 Kg

509 Kg

Attachment

3-Point Linkage

Cutting Height

24.2 – 114.2mm

Cutting capacity

12mm

Overall Width

2.05m

2.64m

2.94m

Overall Length

2.15m

1.89m

PTO Speed

540 rpm

Protection

Shear Bolt

Blade Carriers

No. of Rotors

Blade Tip Speed

4500 m/min

4140 m/min

4620 m/min

Blade Overlap

n/a

90mm

Skids

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali McConnel Taglia erba

McConnel

McConnel PA5040-40 Manuale utente

McConnel

McConnel SR420 Manuale utente

McConnel

McConnel RoboCut Manuale di programmazione

McConnel

McConnel MAGNUM 130 Manuale di programmazione

McConnel

McConnel ROBOCUT RC28 Manuale utente

McConnel

McConnel MAGNUM 130 Manuale del prodotto

McConnel

McConnel RoboCut Manuale di programmazione

McConnel

McConnel PA5054 VERSI Manuale utente

McConnel

McConnel MERLIN Xtreme Offset Manuale di programmazione

McConnel

McConnel MAGNUM EURO MINI Series Manuale di programmazione

McConnel

McConnel ECON HEDGEMASTER Mk3 Manuale utente

McConnel

McConnel ROBOMAX Manuale utente

McConnel

McConnel SR15-6 Manuale utente

McConnel

McConnel MAGNUM MULCHA 225 Manuale utente

McConnel

McConnel MAGNUM HEAVY DUTY Series Manuale utente

McConnel

McConnel Twose Series Manuale utente

McConnel

McConnel ROBOMAX Manuale utente

Manuali Taglia erba popolari di altre marche

RHINO

RHINO 1958 Manuale utente

Wolf Garten

Wolf Garten Compact plus 40 B Manuale utente

Cub Cadet

Cub Cadet LTX 1045 Manuale utente

Craftsman

Craftsman 917.378461 Manuale utente

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Manuale utente

Challenge

Challenge CH18V2 Istruzioni operative

TALEN TOOLS

TALEN TOOLS AVR HGM30 Manuale utente

DEWEZE

DEWEZE ATM-725 Manuale operativo

Weed Eater

Weed Eater 180083 Manuale utente

Husqvarna

Husqvarna Poulan Pro PP185A42 Manuale utente

Better Outdoor Products

Better Outdoor Products Quick Series Manuale utente

Cub Cadet

Cub Cadet 23HP Z-Force 60 Manuale operativo

MTD

MTD 795, 792, 791, 790 Manuale utente

Toro

Toro Groundsmaster 3505-D Manuale utente

Dennis

Dennis FT 610 Manuale utente

AIRFORCE

AIRFORCE F-15 Gen 3 Manuale utente

MTD

MTD 126-220-000 Manuale utente

Toro

Toro 74806 Manuale utente