Mec Nano10-XD Manuale utente

Part # 96251

January 2023

Serial Number Range

18000000 - Up

Service & Parts Manual

Nano10™-XD

ART_5973

Page i Nano10™-XD - Service & Parts Manual

January 2023

Revision History

Date Reason for Update

January 2023 New Release

1401 S. Madera Avenue, Kerman, CA93630 USA

Toll Free: 1-877-632-5438

Phone: 1-559-842-1500

Fax: 1-559-842-1520

[email protected]

www.MECawp.com

MEC Aerial Work Platforms

Page ii Nano10™-XD - Service & Parts Manual

January 2023

Table of Contents

Chapter 1 - Service � � � � � � � � � � � � � 1

Service Introduction. . . . . . . . . . . . . . . . . 1

Section 1 - MEC Operator Policy . . . . . . . . . . . . . 2

MEC Operator Policy � � � � � � � � � � � � � � � � � � � 2

Section 2 - Safety Symbols & General Safety Tips . . . . . . . . 3

Safety Symbols & General Safety Tips � � � � � � � � � � � � � � 3

Section 3 - Specications . . . . . . . . . . . . . . . 4

Specications, Indoor/Outdoor Rated � � � � � � � � � � � � � � � 5

Section 4 - Torque Specications . . . . . . . . . . . . . 6

Bolt Torque Specication - American Standard � � � � � � � � � � � � 6

Bolt Torque Specication - Metric Standard � � � � � � � � � � � � � 7

Hydraulic Components Torque Table � � � � � � � � � � � � � � � 8

Section 5 - Hydraulic System, Electrical System and Total System . . . . 9

Hydraulic System, Electrical System and Total System � � � � � � � � � � 9

Section 6 - Machine Components . . . . . . . . . . . . . 10

Machine Components � � � � � � � � � � � � � � � � � � � 10

Section 7 - Emergency Systems and Procedures. . . . . . . . . 11

Emergency Systems and Procedures � � � � � � � � � � � � � � � 11

Section 8 - Transport and Lifting Instructions. . . . . . . . . . 12

Transport and Lifting Instructions � � � � � � � � � � � � � � � � 12

Section 9 - Maintenance. . . . . . . . . . . . . . . . 14

Maintenance Inspection Report � � � � � � � � � � � � � � � � 14

Daily Maintenance� � � � � � � � � � � � � � � � � � � � 15

Quarterly Maintenance � � � � � � � � � � � � � � � � � � 17

Semi-annual Maintenance� � � � � � � � � � � � � � � � � � 23

Yearly Maintenance � � � � � � � � � � � � � � � � � � � 24

Section 10 - Schematics . . . . . . . . . . . . . . . 26

Electrical Schematic � � � � � � � � � � � � � � � � � � � 26

Chapter 2 - Parts � � � � � � � � � � � � � � 28

Parts Introduction . . . . . . . . . . . . . . . . . 28

Section 11 - Chassis. . . . . . . . . . . . . . . . . 29

Steer Linkage and Wheels Assembly � � � � � � � � � � � � � � � 29

Drive Wheel Assembly� � � � � � � � � � � � � � � � � � � 31

Pothole Protection Assembly � � � � � � � � � � � � � � � � � 33

Right Tray Assembly � � � � � � � � � � � � � � � � � � � 35

Page iii Nano10™-XD - Service & Parts Manual

January 2023

Left Tray Assembly � � � � � � � � � � � � � � � � � � � 37

Ground Control Assembly � � � � � � � � � � � � � � � � � � 39

Charger and Accessories � � � � � � � � � � � � � � � � � � 41

Motor Controller Assembly � � � � � � � � � � � � � � � � � 43

Section 12 - Scissor . . . . . . . . . . . . . . . . . 45

Scissor Assembly � � � � � � � � � � � � � � � � � � � � 45

Electric Cylinder Assembly � � � � � � � � � � � � � � � � � 49

Section 13 - Platform . . . . . . . . . . . . . . . . 51

Platform Assembly� � � � � � � � � � � � � � � � � � � � 51

Step Installation � � � � � � � � � � � � � � � � � � � � 53

Platform Control Assembly � � � � � � � � � � � � � � � � � 55

Platform Control Box Assembly � � � � � � � � � � � � � � � � 57

Section 14 - Electrical System . . . . . . . . . . . . . . 59

Electrical Harness � � � � � � � � � � � � � � � � � � � � 59

Section 15 - Decals . . . . . . . . . . . . . . . . . 61

Decals � � � � � � � � � � � � � � � � � � � � � � � 61

Page 1 Nano10™-XD - Service & Parts Manual

January 2023

Service Introduction

This Service section is designed to provide you, the customer, with the instructions needed to

properly maintain the MEC self-propelled aerial work platform. When used in conjunction with the

illustrated Parts section in this manual and the Operator’s Manual (provided separately), this manual

will assist you in making necessary adjustments and repairs, and identifying and ordering the correct

replacement parts.

All parts represented here are manufactured and supplied in accordance with MEC quality

standards. We recommend that you use genuine MEC parts to ensure proper operation and reliable

performance.

To obtain maximum benets from your MEC Aerial Work Platforms, always follow the proper

operating and maintenance procedures. Only trained authorized personnel should be allowed to

operate or service this machine. Service personnel should read and study the Operator’s, and the

Service and Parts Manuals in order to gain a thorough understanding of the unit prior to making any

repairs.

Chapter 1 - Service

Page 2 Nano10™-XD - Service & Parts Manual

January 2023

MEC Operator Policy

Note: The best method to protect yourself and others from injury or death is to use common sense.

If you are unsure of any operation, don’t start until you are satised that it is safe to proceed

and have discussed the situation with your supervisor.

Service personnel and machine operators must understand and comply with all warnings and

instructional decals on the body of the machine, at the ground controls, and platform control console.

MODIFICATIONS OF THIS MACHINE FROM THE ORIGINAL DESIGN AND

SPECIFICATIONS WITHOUT WRITTEN PERMISSION FROM MEC ARE

STRICTLY FORBIDDEN. A MODIFICATION MAY COMPROMISE THE

SAFETY OF THE MACHINE, SUBJECTING OPERATOR(S) TO SERIOUS

INJURY OR DEATH.

MEC’s policies and procedures demonstrate our commitment to Quality and our relentless ongoing

e󰀨orts towards Continuous Improvement, due to which product specications are subject to change

without notice.

Any procedures not found within this manual must be evaluated by the individual to assure oneself

that they are “proper and safe.”

Your MEC Aerial Work Platform has been designed, built, and tested to provide many years of safe,

dependable service. Only trained, authorized personnel should be allowed to operate or service the

machine.

MEC, as manufacturer, has no direct control over machine application and operation. Proper safety

practices are the responsibility of the user and all operating personnel.

If there is a question on application and/or operation, contact MEC Aerial Work Platforms:

1401 S. Madera Avenue, Kerman, CA93630 USA

Toll Free: 1-877-632-5438

Phone: 1-559-842-1500

Fax: 1-559-842-1520

[email protected]

www.MECawp.com

MEC Aerial Work Platforms

MEC Operator Policy

Section 1 - MEC Operator Policy

Page 3 Nano10™-XD - Service & Parts Manual

January 2023

Safety Symbols & General Safety Tips

MEC manuals and decals use symbols, colors and signal words to help you recognize important

safety, operation and maintenance information.

RED and the word DANGER – Indicates an imminently hazardous

situation which, if not avoided, will result in death or serious injury.

ORANGE and the word WARNING – Indicates a potentially hazardous

situation which, if not avoided, could result in death or serious injury.

YELLOW with alert symbol and the word CAUTION – Indicates a

potentially hazardous situation which, if not avoided, may result in minor

or moderate injury.

YELLOW without alert symbol and the word CAUTION – Indicates a

potentially hazardous situation which, if not avoided, may result in

property damage.

GREEN and the word NOTICE – Indicates operation or maintenance

information.

Regular inspection and constant maintenance is the key to e󰀩cient economical operation of your

aerial work platform. It will help to assure that your equipment will perform satisfactorily with a

minimum of service and repair.

The actual operating environment of the machine governs the inspection schedule. Correct lubrication

is an essential part of the preventative maintenance to minimize wear on working parts and ensure

against premature failure. By maintaining correct lubrication, the possibility of mechanical failure and

resulting downtime is reduced to a minimum.

• Use only recommended lubricants. Improper lubricants or incompatible lubricants may be as

harmful as no lubrication.

• Watch for makeshift “xes” which can jeopardize safety as well as lead to more costly repair.

Safety Symbols & General Safety Tips

Section 2 - Safety Symbols & General Safety Tips

Page 4 Nano10™-XD - Service & Parts Manual

January 2023Section 3 - Specications

Specications, Indoor Rated Only

Height, Working Maximum1Indoor 16.4 ft 5.0 m

Outdoor Indoor Rated Only Indoor Rated Only

Height, Platform Maximum Indoor 9.8 ft 3.0 m

Outdoor Indoor Rated Only Indoor Rated Only

Height, Stowed Maximum 5.3 ft 1.60 m

Maximum Personnel Indoor 1

Outdoor Indoor Rated Only

Manual Force Indoor 45 lbs 200 N

Outdoor Indoor Rated Only Indoor Rated Only

Width 30.3 in 0.77 m

Length, Platform 45.7 in 1.16 m

Platform Dimensions (Length × Width) 44.1 × 23.6 in 1.16 × 0.6 m

Maximum Load Capacity 500 lbs 227 kg

Maximum Wind Speed 0 mph 0 m/s

Wheelbase 37.4 in 0.95 m

Max Wheel Load 520 lbs 235 Kg

Turning Radius Inside 17.7 in 0.45 m

Outside 47.2 in 1.20 m

Ground Clearance 2.4 in 6.0 cm

Ground Clearance (Pothole Guards Deployed) 0.6 in 1.6 cm

Weight51,235 lbs 560 Kg

Controls Proportional

AC Outlet In Platform Standard

System Voltage 24 V

Tire Size 7.9 × 3 in 200 × 80 mm

Airborne Noise Emissions2<70 dB (Vibration value does not exceed 2.5m/s2)

Maximum Slope Rating, Stowed Position325% (14°)

Maximum Side Slope Rating, Stowed Position325% (14°)

Maximum Working Slope X-1.5°, Y-3°

Chassis Inclination 1.5 Side 3.0 Inline

Max Wind Speed Indoor Rated Only

Drive Speeds

Stowed, Maximum 2.5 mph 4.0 km/h

Platform Raised, Maximum 0.25 mph 0.4 km/h

Floor Loading Information

Tire Load, Maximum 727 lbs 330 kg

Tire Contact Pressure 145 psi 10.2 kg/cm2(997.5 kPa)

Occupied Floor Pressure4194 psf 938.1 kg/m2(9.2 kPa)

Battery

Voltage 12.8V DC

Quantity 2

Battery Capacity, Maximum 63 AH

Meets requirements of ANSI A92.20-2020 and CSA B354.6-2019.

1Working Height adds 6 feet (2 m) to platform height.

2Maximum sound level at normal operating workstations (A-weighted)

3Slope rating is subject to ground conditions and adequate traction.

4 Floor loading information is approximate and does not incorporate di󰀨erent option congurations.

5Weight may increase with certain options.

This applies to machines up to serial # 18000374

Page 5 Nano10™-XD - Service & Parts Manual

January 2023Section 3 - Specications

Specications, Indoor/Outdoor Rated

Height, Working Maximum1Indoor 16.4 ft 5.0 m

Outdoor 13.5 ft 4.3 m

Height, Platform Maximum Indoor 9.8 ft 3.0 m

Outdoor 7.5 ft 2.3 m

Height, Stowed Maximum 5.3 ft 1.60 m

Maximum Personnel Indoor 1

Outdoor 1

Manual Force Indoor 45 lbs 200 N

Outdoor 45 lbs 200 N

Width 30.3 in 0.77 m

Length, Platform 45.7 in 1.16 m

Platform Dimensions (Length × Width) 44.1 × 23.6 in 1.16 × 0.6 m

Maximum Load Capacity 500 lbs 227 kg

Maximum Wind Speed 0 mph 0 m/s

Wheelbase 37.4 in 0.95 m

Max Wheel Load 520 lbs 235 Kg

Turning Radius Inside 17.7 in 0.45 m

Outside 47.2 in 1.20 m

Ground Clearance 2.4 in 6.0 cm

Ground Clearance (Pothole Guards Deployed) 0.6 in 1.6 cm

Weight51,235 lbs 560 Kg

Controls Proportional

AC Outlet In Platform Standard

System Voltage 24 V

Tire Size 7.9 × 3 in 200 × 80 mm

Airborne Noise Emissions2<70 dB (Vibration value does not exceed 2.5m/s2)

Maximum Slope Rating, Stowed Position325% (14°)

Maximum Side Slope Rating, Stowed Position325% (14°)

Maximum Working Slope X-1.5°, Y-3°

Chassis Inclination 1.5 Side 3.0 Inline

Max Wind Speed 28 mph 12.5 m/s

Drive Speeds

Stowed, Maximum 2.5 mph 4.0 km/h

Platform Raised, Maximum 0.25 mph 0.4 km/h

Floor Loading Information

Tire Load, Maximum 727 lbs 330 kg

Tire Contact Pressure 145 psi 10.2 kg/cm2(997.5 kPa)

Occupied Floor Pressure4194 psf 938.1 kg/m2(9.2 kPa)

Battery

Voltage 12.8V DC

Quantity 2

Battery Capacity, Maximum 63 AH

Meets requirements of ANSI A92.20-2020 and CSA B354.6-2019.

1Working Height adds 6 feet (2 m) to platform height.

2Maximum sound level at normal operating workstations (A-weighted)

3Slope rating is subject to ground conditions and adequate traction.

4 Floor loading information is approximate and does not incorporate di󰀨erent option congurations.

5Weight may increase with certain options.

This applies to machines from serial # 18000375

Page 6 Nano10™-XD - Service & Parts Manual

January 2023Section 4 - Torque Specications

Bolt Torque Specication - American Standard

Fasteners

Use the following values to apply torque unless a specic torque value is called out for the part being

used.

American Standard Cap Screws

SAE Grade 5 8

Cap Screw

Size (inches)

ART_5816A

ART_5816B

Torque Torque

Ft. Lbs Nm Ft. Lbs Nm

Min Max Min Max Min Max Min Max

1/4 - 20 6.25 7.25 8.5 10 8.25 9.5 11 13

1/4 - 28 8 9 11 12 10.5 12 14 16

5/16 - 18 14 15 19 20 18.5 20 25 27

5/16 - 24 17.5 19 12 26 23 25 31 34

3/8 - 16 26 28 35 38 35 37 47.5 50

3/8 - 24 31 34 42 46 41 45 55.5 61

7/16- 14 41 45 55.5 61 55 60 74.5 81

7/16 - 20 51 55 69 74.5 68 75 92 102

1/2 - 13 65 72 88 97.5 86 96 116 130

1/2 - 20 76 84 103 114 102 112 138 152

9/16 - 12 95 105 129 142 127 140 172 190

9/16 - 18 111 123 150 167 148 164 200 222

5/8 - 11 126 139 171 188 168 185 228 251

5/8 - 18 152 168 206 228 203 224 275 304

3/4 - 10 238 262 322 255 318 350 431 474

3/4 - 16 274 302 371 409 365 402 495 544

7/8 - 9 350 386 474 523 466 515 631 698

7/8 - 14 407 448 551 607 543 597 736 809

1- 8 537 592 728 802 716 790 970 1070

1 - 14 670 740 908 1003 894 987 1211 1137

Torque values apply to fasteners as received from the supplier, dry or when lubricated with

normal engine oil.

If special graphite grease, moly-disulphide grease, or other extreme pressure lubricants are

used, these torque values do not apply.

Bolt Torque Specication - American Standard

Altri manuali per Nano10-XD

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Sistema di sollevamento popolari di altre marche

morse

morse 82H-124 Manuale utente

Braun

Braun NL955 Series Manuale utente

haacon

haacon 1889.10 Manuale utente

Protekt

Protekt AT 252 Manuale utente

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 Manuale utente

Nova Technology International, LLC

Nova Technology International, LLC NAS Series Manuale utente

Genie

Genie Z-60/34 Manuale utente

Screen Technics

Screen Technics INTERFIT Vertical Up Lift Manuale utente

Mortuary Lift

Mortuary Lift ULTIMATE 1000 Manuale utente

Custom Equipment

Custom Equipment Hy-Brid 3 Series Manuale di programmazione

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Manuale di programmazione

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 Manuale di programmazione

BERG

BERG BeNomic EasyLeaf Manuale utente

Powermate

Powermate LiftGate LG-3 Manuale utente

Snorkel

Snorkel TM12 Series Manuale utente

Terberg

Terberg OMNIDEKA Manuale utente

Harmar Mobility

Harmar Mobility AL625 Istruzioni operative

Rotary

Rotary SPO16 Manuale utente