Mega Video 830-H Manuale utente
001C83XZZ1A3
Network IR PTZ Camera
User’s Manual
Outdoor
Ver. 1.3
1
Table of Contents
1. Overview................................................................................................................................2
1.1 Features......................................................................................................................2
1.2 Package Contents .......................................................................................................3
1.3 Dimensions..................................................................................................................4
1.4 Connectors..................................................................................................................5
2. Camera Cabling.....................................................................................................................6
2.1 Power Connection .......................................................................................................7
2.2 Ethernet Cable Connection..........................................................................................7
2.3 Audio / AIarm I/O & RS-485 Connection......................................................................8
3. System Requirements ..........................................................................................................9
4. Access Camera ...................................................................................................................10
5. Setup Video Resolution......................................................................................................13
6. Configuration Files Export / Import ...................................................................................14
7. Tech Support Information ..................................................................................................15
7.1 Delete the Existing DCViewer....................................................................................15
7.2 Setup Internet Security..............................................................................................16
Appendix: Technical Specifications
2
1. Overview
With the latest encoding technology and built-in IR LEDs, Network IR PTZ
Camera presents strong HDR and high sensitivity performance, and is capable
of capturing high resolution images during daylight hours and even, in
pitch-black darkness.
At night, or in any low/zero lighting environments, Network IR PTZ Camera is
able to provide effective illumination to the objects 200 meters away, and also
delivers crystal clear images with high quality 30x optical zoom lens in long
distance.
With delicate mechanism design, Network IR PTZ Camera features Servo
Feedback technology, which makes the camera precisely return to the previous
position without stalling, and ensures the target monitoring region is fully
secured. IP66 International standard is also guaranteed for outdoor installation.
Furthermore, combining 0 downtime power switching (ZDT) technology, the
camera ensures smooth streaming without sudden power-loss.
1.1 Features
Sony Progressive Scan CMOS Sensor 2M/3M/4M Resolution*
Up to Powerful 30x Optical Zoom
10x Digital Zoom Support
High Dynamic Range (120dB)
Quad Streams Support
Quad Codec: H.264 Baseline / Main / High Profile + MJEPG
True Day & Night (ICR)
2D/3D Noise Reduction
802.3at PoE+ With 4 Pair Support for IR & Heater Activation
Cisco UPoE Support
Servo Feedback
Weatherproof (IP66 International)
0 Downtime Power Switching (ZDT)
IR Distance up to 200m*
IR Illumination Adjustment by Zoom Ratio
BNC & RS-485 Support
Electrical Image Stabilizer (EIS) Support
*Optional
3
1.2 Package Contents
Please check the box contains the items listed here. If any item is missing or
has defects, DO NOT install or operate the product and contact the dealer for
assistance.
Outdoor
Network IR PTZ Camera
M4 Security Screw with Rubber
Quick Guide
CD
3-Pin Power
Terminal Block
14-Pin Alarm/Audio I/O
Terminal Block
NOTE: To purchase power adaptor, please contact the camera
manufacturer for further information.
4
1.3 Dimensions
5
1.4 Connectors
Refer to the diagrams below for the positions of the reset button and various
connectors of the camera. Definition of the reset button and the connectors are
given as follow.
*Do NOT connect external power supply to the alarm I/O connector of the camera.
**Please contact the manufacturer for compatible PoE injector.
NOTE: DC12V power jack and AC24V / DC28-48V power connector
cannot be used at the same time in case of unexpected damage.
NOTE: It is not recommended to record with the SD card for 24/7
continuously, as it may not be able to support long term continuous data
read/write. Please contact the manufacturer of the SD card for
information regarding the reliability and the life expectancy.
No. Connector Definition
1 Audio/Alarm I/O & RS-485
Connector * Audio/Alarm I/O & RS-485 connection
2 Power Connector (DC12V) DC12V power connection
3 RJ-45 Port ** IEEE 802.3at (PoE+) 4-Pair 60W only
4 Power Connector
(AC24V / DC28-48V) AC24V / DC28-48V power connection
5 BNC For analog video output
6 Reset Button Press the button with a proper tool for at least 20
seconds to restore the system.
7 SD Card Slot Insert the SD card into the card slot to store videos
and snapshots. Do not remove the SD card when
the camera is powered on.
6
2. Camera Cabling
The outdoor models are being IP66-rated to prevent water from entering the
camera. However, water might still enter the camera if it is being improperly
installed. Please make sure the warnings below are strictly followed when
installing the camera.
Place all cables and the adaptor in dry and well-waterproofed
environments, e.g. waterproof boxes. The purpose is to prevent moisture
accumulation inside the camera and moisture penetration into cables.
While running cables, slightly bend the cables to a U-shaped curve to
make a low point (as demonstrated in the figures below). The purpose is
to prevent water from entering the camera along the cables from above.
The cable entry hole of the outdoor mounting kit (indicated in the figure
below) needs to be sealed with thread seal tape to avoid water from
entering the camera.
7
2.1 Power Connection
To power up the camera, connect the DC12V or AC24V / DC28-48V power
adaptor to the power connector of the camera and the power outlet. Refer to the
diagram and pin definition below for AC24V / DC28-48V power connection.
Pin Definition
1 AC24V N DC28-48V +
2 GND -
3 AC24V L DC28-48V -
Alternatively, users can use an Ethernet cable and connect it to the RJ-45 port
of the camera and an IEEE 802.3at (PoE+) 4-Pair 60W switch.
Zero Downtime Power Switching (ZDT)
When users connect DC12V power jack and the RJ-45 port at the same time,
the power input comes from the DC12V connector. If the DC12V power source
fails, the camera will switch power input seemly to the RJ-45 port until the
DC12V power source is restored.
2.2 Ethernet Cable Connection
To connect one end of the Ethernet cable to the RJ-45 connector of the camera,
and plug the other end of the cable to the network switch or PC.
NOTE: In some cases, Ethernet crossover cable might be needed when
connecting the camera directly to the PC.
NOTE: Check the status of the link indicator and activity indicator LEDs.
If the LEDs are unlit, please check the LAN connection.
Green Link Light indicates good network connection.
Orange Activity Light flashes for network activity indication.
8
2.3 Audio / AIarm I/O & RS-485 Connection
Please refer to the diagram and pin definition tables below for audio/alarm I/O &
RS-485 connection.
Pin Definition Pin Definition Pin Definition Pin Definition
1 Audio In 5Alarm In 1 9Alarm In 3 13 RS-485 D-
2 Audio Out 6Alarm Out A1 10 Alarm Out B1 14 RS-485 D+
3
GND (Alarm
I/O
& RS-485)
7Alarm In 2 11 Alarm In 4 Def Definition
4 GND
(Audio I/O) 8Alarm Out A2 12 Alarm Out B2 Dn Definition
9
3. System Requirements
To perform the camera via web browser, please ensure the PC is in good
network connection, and meet the system requirement as described below.
Items System Requirement
Personal Computer
Minimum :
1. Intel®CoreTMi5-2430M @ 2.4 GHz
2. 2 GB RAM or more
Recommended :
3. Intel®CoreTMi7-870 @ 2.93 GHz
4. 8 GB RAM
Operating System Windows VISTA / Windows XP / Windows 7
Web Browser
Microsoft Internet Explorer 10.0 or later (recommended)
Firefox (32-bit)
Safari
Network Card 10Base-T (10 Mbps) or 100Base-TX (100 Mbps) or
1000Base-T operation
Viewer ActiveX control plug-in for Microsoft IE
Apple QuickTime 7.7.7 or Before for Firefox
NOTE: The ITE is to be connected only to PoE networks without routing
to the outside plant or equivalent description.
Indice
Altri manuali Mega Video Telecamera di sicurezza
