MegaPoints Controllers System2 Starter Kit Manuale di servizio

MegaPoints Controllers System2 RFID Quad Display Driver Revision 1

megapointscontrollers.co.uk Page 1

System2

RFID Quad Display Driver

User Reference

by MegaPoints Controllers

A quad RFID display module for the System2 range.

Includes support for both Wi-Fi and CAN network operation, additionally JMRI and native

modes via MQTT.

User Guide

Revision 1 APR 2023 Status: Draft

Email: info@megapointscontrollers.com

MegaPoints Controllers System2 RFID Quad Display Driver Revision 1

megapointscontrollers.co.uk Page 2

Table of contents

What is System2 Air? ..............................................................................................................................3

How to use this document......................................................................................................................4

System2 Dual RFID Reader Module ........................................................................................................5

Introduction ........................................................................................................................................5

What’s included ..................................................................................................................................6

Connecting up.....................................................................................................................................6

Getting to your readers admin web page...........................................................................................8

Admin web page .................................................................................................................................8

vPorts ..............................................................................................................................................9

Clear vPorts.....................................................................................................................................9

Example: Clearing the previous display ....................................................................................10

Example: Manually clearing a display.......................................................................................10

Example: Clearing on block exit ................................................................................................11

JMRI specific features .......................................................................................................................11

Reference section .................................................................................................................................12

Network cabling................................................................................................................................12

Getting your first board on your local Wi-Fi network.......................................................................13

System2 admin page features...........................................................................................................15

Board Location..............................................................................................................................16

CAN ID management.....................................................................................................................16

Wi-Fi credential sharing................................................................................................................19

Actions ..........................................................................................................................................20

Reset to defaults...........................................................................................................................21

Save Changes ................................................................................................................................22

Reload Values................................................................................................................................22

Erase WiFi Credentials ..................................................................................................................23

Update Firmware..........................................................................................................................23

Reboot...........................................................................................................................................25

Reload Page...................................................................................................................................26

Documentation .............................................................................................................................26

Network Monitor..........................................................................................................................26

Status area ....................................................................................................................................29

Board Type (1)...............................................................................................................................29

SW Rev (2).....................................................................................................................................30

Templates (3) ................................................................................................................................30

IP Address (4) ................................................................................................................................30

Board Name and serial (5) ............................................................................................................30

SSID(6)...........................................................................................................................................30

In conclusion .........................................................................................................................................30

Contacting us ........................................................................................................................................31

MegaPoints Controllers System2 RFID Quad Display Driver Revision 1

megapointscontrollers.co.uk Page 3

What is System2 Air?

System2 is our new generation of model railway accessory bus products that feature our V-Port

protocol (virtual port) and can address up to 60,000 devices. You can scale an installation from a

single Servo-8 Controller (8 V-ports) right up to a huge layout as your needs grow. Flexibility is baked

in and as we announce new modules that will work right alongside other System2 modules.

The “Air” in System2 refers to how you configure the system. It’s done wirelessly using Wi-Fi. This

means you can configure a device using your PC, tablet or phone and replaces the need for buttons,

flashing lights and extension cables to reach under baseboard locations.

We use Wi-Fi for configuration and a CAN network for data. This offers high speed, low latency and

above all else reliability. You can even shut down the Wi-Fi network when your configuration is

complete making your system secure and robust. It’s not required for operation at all.

MQTT support built right in. Using Wi-Fi and MQTT you can optionally configure the device for

wireless operation and avoid the need to cable in a CAN wired network altogether. Our MQTT

implementation supports two modes, Native for peer to peer communication and JMRI where we

delegate control authority to your JMRI installation.

Software for all System2 Air modules can be updated over the air if your network allows Internet

access. A single button push is all that’s needed to download and install the latest version. This

means as new ideas and features are introduced everyone gets to benefit from them. You can even

see the changes that have been introduced since your last update and choose whether to install or

not. You won’t get nagging reminders to update. It’s flexible and entirely up to you when or if you

decide to do it.

System2 has been real world tested on some of the largest exhibition model railway layouts in the

UK for over a year before launching, so you can be confident it’s fit for your needs and fit for

purpose.

Each of our System2 boards has the administrative core baked in. You can connect to any board’s

admin web page and from there manage your entire network. There’s no central point of control (or

failure) as they are all peers in their own right.

We use standard web protocols for configuration so that your browser can connect and perform all

administrative tasks without requiring any special apps and app permissions. This leaves you in

control of your network.

System2 Air, for the smallest to the largest layouts and everything in between.

In order to use System2 you’ll need a Wi-Fi router configured for DHCP with optional Internet access.

This is the standard router configuration as supplied by your Internet Service Provider.

Designed and manufactured in Cheshire, England.

MegaPoints Controllers System2 RFID Quad Display Driver Revision 1

megapointscontrollers.co.uk Page 4

How to use this document

Treat this guide as a reference. All settings are documented and examples given where appropriate.

It is designed to accompany the System2 Air –RFID Introduction video that will demonstrate all the

functions and use cases.

MegaPoints Controllers System2 RFID Quad Display Driver Revision 1

megapointscontrollers.co.uk Page 5

System2 Dual RFID Reader Module

Introduction

The RFID quad display module is a four channel four digit seven

segment display driver intended to display RFID data generated by

the S2 RFID reader via a System2 network. It features a Wi-Fi based

intuitive configuration from the comfort of your PC, tablet or phone.

You assign each reader/writer to a vPort and the RFID tags read will

be directed there.

RFID tags will be displayed in real-time for up to four channels (4

vPorts). This is the complimentary display for the S2 RFID dual

reader.

You may also need:

12 Volt DC regulated power supply.

o500 mA minimum

Network cable (twisted pair).

oTelephone cable

oAlarm cable

oSuch as CW1109B/Y supplied by CPC/Farnell .

See website for cable links. Non twisted pair

cable is OK for testing purposes, not for

installation.

An accompanying RFID Dual reader.

To use the network features of this board you will require:

A Wi-Fi Router that is configured for:

oDHCP (default enabled on most routers)

oAn active internet connection (only required for software updates).

A current browser that supports HTML5.

To use the MQTT features of this board you require:

An MQTT broker installed on your local network (see installation video on our System2

website).

An optional JMRI installation if JMRI is to be used.

This is a 12 Volt device and

should be connected to a

minimum of 2 Amp

regulated power supply.

MegaPoints Controllers use

static sensitive components

that must be handled with

care.

Avoid touching any

components or the circuit

printed on the bottom of

the board.

Avoid placing the board on

any metallic surfaces

including track.

DO NOT connect any part

of this device directly to

your track bus.

MegaPoints Controllers System2 RFID Quad Display Driver Revision 1

megapointscontrollers.co.uk Page 6

What’s included

Refer to the picture below.

Included with the S2 RFID Quad Display driver are:

4 x 4 digit seven segment displays (blue)

4 x display connector cables

Connecting up

Connect the displays (blue) to each display connector on the System2 board (white). Ensure the top

of the connector (S2 black marked GND) matches the GND connector pin on the blue.

MegaPoints Controllers System2 RFID Quad Display Driver Revision 1

megapointscontrollers.co.uk Page 7

Connect each board to a 12 Volt regulated power supply, minimum ½ A per device.

Connect the network cable to the two screw terminals. Observe the ‘H’ and ‘L’ terminals.

Ensure all the ‘H’ and ‘L’ wires connect to each other respectively.

MegaPoints Controllers System2 RFID Quad Display Driver Revision 1

megapointscontrollers.co.uk Page 8

Getting to your readers admin web page

Navigate to the RFID Quad Display admin page by either connecting to the IP address assigned by

your network or navigating to the device name. In the screen image below the device name is

“rfidd-45193c”. From your PC, Mac or tablet enter http://rfidd-45193c “ or

http://rfidd-45193c.local”.

If you have existing System2 products configured and are using the wired CAN bus you can use the

“Locate Board” feature to deteremine the IP address. Id correctly cabled it will appear in the Status

Log along with any other boards on the network. In the example below the RFID Display board has

no IP address (0.0.0.0) as it is new and not registered with your network.

Press the “Share WiFi Credentials” button on any System2 board that is configured and after a few

seconds you’ll see the new board appear with an IP address.

Clicking on the blue IP address for the Panel Controller is usually the quickest way to get to the main

admin web page. This technique works for all System2 boards.

Admin web page

MegaPoints Controllers System2 RFID Quad Display Driver Revision 1

megapointscontrollers.co.uk Page 9

vPorts

There are four vPorts that data will be received on in the second column. Each vPort must match the

vPort for the RFID dual reader. As a tag is read by the corresponding reader it will display on the

appropriate seven segment display.

Clear vPorts

The clear vPorts default to 1-4. These are regular vPorts (normally a block detector or point position

indicator) that can be used to clear a display. The “Clear State” buttons can be toggled by clicking to

either a “0” or “1” indicating ON or occupied and OFF or clear.

When a matching vPort is triggered and matches the clear state the corresponding RFID seven

segment display will clear.

Set these to “0” to disable the feature.

MegaPoints Controllers System2 RFID Quad Display Driver Revision 1

megapointscontrollers.co.uk Page 10

Example: Clearing the previous display

We can arrange to clear a previous display once the next reader along has read a tag. This allows you

to clear a display once the loco has left the section.

Refer to the image above. Display 1 will clear when reader 2 reads a valid tag.

Set the RFID reader 2 State vPort to State “1”

and vPort “1”(right image). This will send an

occupied signal to vPort 1 when the reader

activates.

On the RFID Display

(left image) set the

Display 1 Clear vPort

to “1”and the Clear

State to “1”. This

will clear display 1

then the vPort 1

receives an active

flag.

Example: Manually clearing a display

In this example we will manually clear displays. You can do this in conjunction with the previous

example or as an isolated use case.

Altri manuali per System2 Starter Kit

Indice

Manuali Sistema RFID popolari di altre marche

Chainway

Chainway R1 Manuale utente

IFM

IFM DTC600 Manuale utente

Elatec

Elatec TWN4 MULTITECH NANO LEGIC 63 M Manuale utente

RHOMBUS

RHOMBUS DR20 Manuale utente

Sirit

Sirit IDentity 6204 Manuale utente

SOREX

SOREX FLEX Manuale utente

Omron

Omron V780-HMD68-EIP-KR Manuale utente

IDENTEC SOLUTIONS

IDENTEC SOLUTIONS iPOINT Si Istruzioni per l’uso

Shuttle

Shuttle BR06 Istruzioni utente

Digilock

Digilock Curve Keypad Basic Manuale utente

Atid

Atid AT870 Manuale utente

Chacon

Chacon 34958 Manuale utente

Paxton

Paxton PROXIMITY architectural reader Manuale utente

CipherLab

CipherLab 1800 series Manuale utente

Brady

Brady FR22 Manuale utente

Kronotech

Kronotech BLUEBOX GEN2 M30 UHF Manuale utente

Unitech

Unitech RH767 Manuale utente

Honeywell

Honeywell 026366.00 Manuale utente