Meiji Techno SZG Series Manuale utente

GMZT/PT/76

GMZT/PT/85

GMZ-5 BF/BD

GMZ-5TR BF/BD

GMZ-8TR BF/BD

GMZ-13 BF/BD

GMZ-13TR BF/BD

GMZ-40 BF/DF

GMZ-41 BF/DF

GMZ-50 BF/DF

GMZ-51 BF/DF

GMT-1 BF/DF

GMT-2 BF/DF

GMT-3 BF/DF

Contents SZG Series

Before use

1. Nomenclature …………………………………………………………………………..1

2. Assemblage………………………………………………………………………………3

3.Operation ………………………………………………………………………………4

3-1. Illumination…………………………………………………………………………..4

3-2. Adjust observation tube & base………………………………… ……… ………. .. 4

3-3. Adjust focusing tightness ………………………………………………………….4

3-4. Diopter & focusing ………………………………………………………………..5

3-5. Interpupillary distance……………………………………………………………….5

3-6. Auxiliary lens ………………………………………………………………………..5

3-7. Mount and remove micrometer …………………………………………………….. 6

3-8. Set photo device & TV device …………………………………………………… .. 6

3-9. Select light path…………………………………………………………………….. 6

3-10. Focus TV device ………………………………………………………………….. 6

3-11. Iris diaphragm …………………………………………………………………. 7

3-12. Switch Bright-field & Dark-field ………………………………………………… .7

3-13. Adjust top light ……… …………………………………………………………… 7

3-14. Replace fuse … …………………………………………………………………….7

3-15. Replace bulb for bottom light …………………………………………………….7

3-16. Replace bulb for top light …………………………………………………………. 8

3-17. Polarizer …………………………………………………………………………. 8

4. Technical parameter……………………………………………………………………9

5. Troubleshooting ……………………………………………………………………… 10

Before use SZG series

Operation

1. As the microscope is precision instruments, it should be taken carefully and avoid impact during

transportation.

2. The microscope should be set in dry and clean place. Do not expose in the sun directly and avoid high

temperature and violent vibration. The environment temperature should be 0 ℃～40 ℃and the humidity

should be 85%.

3. To keep the image clearly, do not leave finger prints or stains on lens.

4. Make sure the main power supply is suitable within 90-240V before use.

5. Do not adjust the right and left focusing knob to opposite direction simultaneity, otherwise it will with

trouble.

6. Please shut off power supply before replace bulb.

7. Please shut off power supply before remove the microscope.

8. Please holder the microscope from arm and base and put off safety.

★If hold on the stage, focusing knobs or observation tubes during removing, it will damage the

microscope.

Maintenance

1. All lenses should be kept cleanly. Use air or lens cloth to clear dust; Use cotton pledget with 3:7 ethanol

and aether mixed to clear spot and fingerprint.

2. Never use organic solution to clean the surface of microscope, especially the plastic parts. If necessary,

please choose neutral detergent.

3. Do not disassemble or assemble the microscope yourself to avoid damaging the capability.

4. After using, put on dust cover to protect microscope and put in dry place to prevent rust.

1. Nomenclature SZG series

Microscope head

Lock screw

Eyepiece

Focusing knob

Microscope stand Gem clamp

SZG series

Tri-tube

Light path selection pole

Switch for top light

Zoom knob

Screw to hold top light

Switch for iris diaphragm

Knob for

darkfield/brightfield

Plug

Lock screw for

ht holde

Screw for

rotatable axial

Brightness adjusting knob

Base

Power switch

Stand

Focusing knob

Dio

2. Assemblage SZG series

Below is the assemblage scheme for SZN series, the numbers show assemblage order.

★Before assemblage, please make sure that every part is clean. And keep them clean during

assemblage.

135 camera

C type monitor P

mount

Photo eyepiece

Photo tube

C mount

TV tube

Eyepiece

Microscope head

Stand

Gem clamp

3. Operation SZG series

3-1 Illumination

⑴Connect main power supply and set main switch at “-”.

⑵Use bottom light: Turn brightness adjusting knob to

suitable. The direction showed. (Fig. 1)

⑶7Wfluorescentbulbfortoplightanditcannotadjusted

for brightness. It has separate switch knob, show the

figure below.

3-2 Adjust observation tube & base

⑴Hold the front of the base and arm to turn to suitable

position for observation. (Fig. 2) Then tight the screw

for rotatable axial.

⑵The plastic disc under base can make the whole

microscope for 360° rotatable.

3-3 Adjust focusing tightness

⑴Hold one knob to turn another to achieve adjustment of

tightness. Tightness is base on turn direction. (Fig. 3)

⑵ Adjust the tightness to suitable to make observation more

comfortable and prevent stage slipping down.

Figure 3

Figure 1

Figure 2

Hold Hold

Turn

Loose Hold

Tigh

Screw for

rotatable axial

SZG series

3-4 Diopter & focusing

⑴Turn the focusing knob to Max. magnification.

⑵Turn the both eyepiece tube at “0” position.

⑶Observe through right tube. If the image is not clear, use

focusing knob to make it clear.

⑷Turn the focusing knob to Min. magnification.

⑸Observe through right tube. If the image is not clear,

adjust diopter to make it clear.(Fig. 4)

⑹Turn the focusing knob to Max. magnification again. If

the image is still not clear, repeat the above step ⑶and

⑸.

⑺Turn the focusing knob to Min. magnification, then

observe through left tube. If the image is not clear,

adjust diopter to make it clear. (Fig. 4)

3-5 Interpupillary distance

Holdbotheyepiecetubetoturnasthedirectionshowed

Fig. 5 to suitable position

3-6 Auxiliary lens

⑴Set on auxiliary lens to the bottom of the microscope head.

⑵ It should use additional tube when use 0.5X auxiliary

lens. (Fig. 6)

⑶When use 1.5X or 2X auxiliary lens, please take off 4pcs

M3 screws on focus arm and set the focus arm into 4pcs

holes and lock. (Fig. 7)

★It need not use additional tube when use 0.75X

auxiliary lens.

Figure 4

ure 5

Figure 6

Left diopter

Microscope

head

Additional tube

Focus ar

Figure 7

Right diopter

SZG series

3-7 Mount and remove micrometer

⑴ Take off the mounting ring from eyepiece. (Fig. 8)

⑵Clean the micrometer and mount it into mounting ring,

make sure the inscription side up. (Fig. 8)

⑶Mount the mounting ring into eyepiece.

⑷ To remove the micrometer, please take off the mounting

ring first. Then take out the micrometer and wrap it with

clean and soft paper for storage.

3-8 Set photo device & TV device

⑴ Screw video tube ①into M28 hole of tri-tube. (Fig. 9)

⑵ Loose the lock-screw ②on TV tube, and take off the

C-mount ③from tube.

⑶ Screw the C-mount into video camera.

⑷ Connect the video camera with TV tube and lock by

screw ②.

3-9 Select light path

⑴To observe through binocular, please turn the light path

selection lever ①to “OUT”. (Fig. 10)

⑵If turn the light path selection lever ①to “IN”, (Fig 10) ,

you can observe through both binocular and trinocular.

★Whether the light path is to “OUT” or “IN”, please make

sure it is to the end.

3-10 Focus TV device

⑴Turn the light path selection lever to “IN”. (Fig 11)①

Turn the zoom knob to the Max. magnification and⑵

observe through video camera and adjust focusing knob

to make image clear.

⑶Turn the zoom knob to the Mix. Magnification. If the

image is not clear, please adjust the adjusting ring ②on

video tube to make it clear.

Turn the zoom knob to Max. magnification again. If the⑷

image is still not clear, please repeat the step (2), (3) to

make it clear within the whole zoom range.

Figure 8

Figure 9

Figure 11

Figure 10

SZG series

3-11 Iris diaphragm

Turn switch for iris diaphragm to change the aperture of

bottom light. The aperture for iris diaphragm is Φ3mm～

Φ44mm. (Fig. 12)

3-12 Switch Bright-field & Dark-field

Turn the knob for bright-field and dark-field to select

bright-field and dark-field. (Fig. 12)

★Whenever select dark-field or bright-field, the knob

should be turned thoroughly.

3-13 Adjust top light

It is 7W fluorescent bulb for top light and connect by a soft

tube.

(Fig. 12)

3-14 Replace fuse

Please set the power switch at “O” before replace fuse.

Use ”-“ screw driver to take off fuse ①from its base ②

and change a new on, then screw in. (Fig. 13)

★Fuse: 250V3A

3-15 Replace bulb for bottom light

Please shut off power supply before replace bulb. Turn the

microscope stand with 45° and loose the screw under stage.

(Fig. 14)

★Please wait the bulb cool down for replacement.

★Don’t touch the bulb directly by hand.

Figure 12

Soft tube

Knob for

B/D fiel

Switch for iris

diaphragm

Figure 13

Figure 14

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Meiji Techno Microscopio

Meiji Techno

Meiji Techno EM-22 Manuale utente

Meiji Techno

Meiji Techno EM-33 Manuale utente

Meiji Techno

Meiji Techno EM-30 Series Manuale utente

Meiji Techno

Meiji Techno MT-10 Series Manuale utente

Meiji Techno

Meiji Techno RZ Series Manuale utente

Meiji Techno

Meiji Techno EMF Series Manuale utente

Meiji Techno

Meiji Techno MT-30 Series Manuale utente

Meiji Techno

Meiji Techno IM700 Series Manuale utente

Meiji Techno

Meiji Techno MT7500 series Manuale utente

Meiji Techno

Meiji Techno MT6200ECW Manuale utente

Meiji Techno

Meiji Techno MT7000 series Manuale utente

Meiji Techno

Meiji Techno MT-16 Manuale utente

Meiji Techno

Meiji Techno VT Series Manuale utente

Meiji Techno

Meiji Techno TC5000 Series Manuale utente

Meiji Techno

Meiji Techno TM200 Series Manuale utente

Meiji Techno

Meiji Techno MX4000 series Manuale utente

Meiji Techno

Meiji Techno ML5000 Series Manuale utente

Meiji Techno

Meiji Techno MT5500 Manuale utente

Meiji Techno

Meiji Techno ML7000 Series Manuale utente

Meiji Techno

Meiji Techno MC Series Manuale utente

Meiji Techno

Meiji Techno MT-50 Series Manuale utente

Meiji Techno

Meiji Techno MT6000 Series Manuale utente

Meiji Techno

Meiji Techno PKL Manuale utente

Meiji Techno

Meiji Techno EMZ-1 Manuale utente

Manuali Microscopio popolari di altre marche

Thermo Scientific

Thermo Scientific Nicolet iN10 Guida

National

National DC3-163 Manuale utente

KERN Optics

KERN Optics OPE-1 Manuale utente

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Manuale utente

Prior

Prior Lux POL Manuale utente

Opitec

Opitec Smartscoop 115615 Manuale utente

KERN

KERN OPO-1 Manuale utente

Topcon

Topcon SP-1P Manuale utente

Motic

Motic PA43 Manuale utente

Leica

Leica DVM5000 Guida utente

MshOt

MshOt MZ62 Manuale utente

KERN Optics

KERN Optics OZR-5 Manuale utente

VWR

VWR VisiScope 384 Series Manuale utente

Nikon

Nikon ECLIPSE E200 POL Manuale utente

Leica

Leica DI C800 Manuale

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Manuale utente

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Manuale utente

Olympus

Olympus SZ61 Manuale utente