Metal Samples MS2510 Manuale utente

MS2510 Current Loop Receiver

User Manual

Metal Samples Company

A Division of Alabama Specialty Products, Inc.

152 Metal Samples Rd., Munford, AL 36268 Phone: (256) 358-4202 Fax: (256) 358-4515

E-mail: [email protected] Internet: www.metalsamples.com

_______________________________________________________________________________________________

Table of Contents

SECTION 1 – INTRODUCTION

Receiving the Instrument.................................................................................................................................................3

Unpacking .......................................................................................................................................................................3

Cleaning ..........................................................................................................................................................................3

Installation.......................................................................................................................................................................3

Mounting.........................................................................................................................................................................4

Electrical .........................................................................................................................................................................5

Main Power.....................................................................................................................................................................6

Transmitter Connections .................................................................................................................................................6

Ethernet Connections ......................................................................................................................................................6

Adjustments.....................................................................................................................................................................6

Storage and Installation Environment .............................................................................................................................6

Physical Dimensions.......................................................................................................................................................7

Specifications..................................................................................................................................................................8

SECTION 2 – SAFETY

Potential Electrical Hazards ............................................................................................................................................9

SECTION 3 – START-UP AND OPERATION

MS2510 Receiver Start-Up.................................................................................................................................11

Operation..........................................................................................................................................................12

Controls Operation.............................................................................................................................................14

Title Screen ....................................................................................................................................................................14

Main Screen ...................................................................................................................................................................15

Setup Screen ...................................................................................................................................................................17

Data Chart Screen............................................................................................................................................................19

About Screen ..................................................................................................................................................................20

SECTION 4 – MAINTENANCE

Fuse Replacement ...........................................................................................................................................................21

SECTION 5 – TROUBLESHOOTING

Troubleshooting Procedures............................................................................................................................................22

SECTION 6 – RETURNING THE INSTRUMENT FOR REPAIR

Return Instructions .........................................................................................................................................................23

SECTION 7 – WARRANTY

Warranty .........................................................................................................................................................................25

SECTION 8 – WIRING DIAGRAM

Wiring Diagram ..............................................................................................................................................................26

_______________________________________________________________________________________________

Section 1 - Introduction

RECEIVING THE INSTRUMENT

The MS2510 Receiver is carefully prepared for shipment to protect it during transit and to enable the

user to install it with a minimum amount of reassembly.

Upon receipt, the instrument should be carefully inspected for transit damage. If damage is apparent,

notify Metal Samples and the carrier for claims inspection.

UNPACKING

Open the package and remove the instrument carefully. The instrument contains a display screen.

While removing, utmost care should be given to the display.

CLEANING

Clean the instrument thoroughly to remove any foreign material that may have accumulated during

shipment.

INSTALLATION

Place the receiver instrument in a convenient location, preferably away from heat producing sources or

direct sunlight.

Use the mounting brackets supplied with the instrument as shown in Figure 1.

_______________________________________________________________________________________________

MOUNTING

Figure 1 – Instrument Mounting

_______________________________________________________________________________________________

ELECTRICAL

Figure 2 – Connections

Transmitter Connections

1. Connect ‘+Ve’ terminal to TB1

2. Connect ‘–Ve’ terminal to TB2 Main Power Connection

1 Phase, 100 -240V AC, 50 /60 Hz, 2A

Current Loop Fuse

100mA 250V Ethernet

Port

_______________________________________________________________________________________________

MAIN POWER

Connect the single phase main voltage 100 V to 240 V by means of supplied main cord. Local

regulations must be considered before connecting it.

Note: In some cases, the instrument is shipped without a connector on the power cord. Each locality

should inspect the power cord and install the proper connector if necessary. The connector should be

installed in a properly grounded outlet for proper over current and earth fault protection.

TRANSMITTER CONNECTIONS

Connect the transmitter connections as below.

Positive Terminal - 1 (+)

Negative Terminal - 2 (-)

(See wiring diagram – Page 26.)

ETHERNET CONNECTIONS

If you are connecting the MS2510 to an Ethernet switch or Router, use a Straight RJ45 cable. If you

are connecting to a PC, use a Crossover RJ45 cable. Before connecting the MS2510 to your local

network please contact your network administrator for proper IP address configuration of the

instrument.

Warning – A duplicated IP address may cause network failure at the installation site. Consult

Network Administrator.

ADJUSTMENTS

The MS2510 Receiver functions must be adjusted and operated only by those authorized personnel

who have read and who thoroughly understand the descriptions of the various control functions

presented in this manual.

STORAGE AND INSTALLATION ENVIRONMENT

Protect the receiver instrument from mechanical stress, humidity, dust and thermal damage. Storage

temperature is -20º C to +60º C. Operating temperature is 0o C to 50oC.

_______________________________________________________________________________________________

PHYSICAL DIMENSIONS

Figure 3 – Physical Dimensions

Overall Dimensions: 9.85” H x 11.73” W x 6.50” D

_______________________________________________________________________________________________

SPECIFICATIONS

WEIGHT - ~4 lbs (~1.9 Kg)

DIMENSIONS - 9.85” x 11.73” x 6.50” (25.02cm x 29.79cm x 16.51cm)

MOUNTING - Panel Mount / Rack Mount

OPERATING TEMP. - 32F to 122o F (0o C to 50oC)

POWER SUPPLY

Voltage - 100 – 240 V, 1 phase, 50/60 Hz

Current - < 2 Amps

SIGNAL

Input - 4 – 20 mA current loop

Voltage - 24V DC

Input Impedance - 250 Ohms

Fuse - 100mA 250V

NETWORK

Use Crossover cable to connect the instrument directly to a PC.

Use Straight Cable to connect to the network switch, router…

Indice

Altri manuali Metal Samples Ricevitore

Metal Samples

Metal Samples MS2540 Manuale utente

Manuali Ricevitore popolari di altre marche

Garmin

Garmin GA 23 Manuale utente

Aiphone

Aiphone PS-12F Manuale utente

IMES

IMES TCS-01CA-PMI Manuale utente

BWI Eagle

BWI Eagle AIR-EAGLE SR Manuale

AMIMON

AMIMON AMN12310 WHDI Manuale utente

Dual

Dual DMCPA79BT Istruzioni operative

Sound Associates

Sound Associates SA652P Manuale utente

Sherwood

Sherwood NewCastle R-772 Manuale utente

Audio

Audio A10-RX Series Manuale utente

AllSee

AllSee PushShare PSRV1.1 Manuale utente

DEMAG

DEMAG DRC-DR D2 Manuale utente

Teleco

Teleco TVRCL868A02 Manuale utente

Bosch

Bosch RF3222E Manuale utente

Kramer

Kramer 631R Manuale utente

Xpress

Xpress xmc10 Manuale utente

JVC

JVC KD-MR1BTS Manuale utente

Omega Engineering

Omega Engineering UWTC-REC3 Manuale utente

e-survey

e-survey E300 Pro Manuale utente