Metapace T-3II Manuale utente

User’s Manual

Metapace T-3II

Thermal Printer

Rev. 1.00

http://www.metapace.com

Rev. 1.00

- 2 -

Metapace T-3II

■Safety Precautions

In using the present appliance, please keep the following safety regulations in order to

prevent any hazard or material damage.

WARNING

Violating following instructions can cause serious injury or death.

Do not bend the cable by force or leave it under any

heavy object.

•A damaged cable can cause a fire.

Do not plug in or unplug with your hands wet.

•You can be electrocuted.

Keep the plastic bag out of children’s reach.

•If not, a child may put the bag on his head.

Do not pull the cable to unplug.

•This can damage the cable, which is the origin of a fire or a

breakdown of the printer.

You must use only the supplied adapter.

•It is dangerous to use other adapters.

Do not plug several products in one multi-outlet.

•This can provoke over-heating and a fire.

•If the plug is wet or dirty, dry or wipe it before usage.

•If the plug does not fit perfectly with the outlet, do not plug in.

•Be sure to use only standardized multi-outlets.

PROHIBITED

ONLY SUPPLIED ADAPTER

PROHIBITED

Rev. 1.00

- 3 -

Metapace T-3II

CAUTION

Violating following instructions can cause slight wound or damage the appliance.

Do not use the printer when it is out of order. This

can cause a fire or an electrocution.

•Switch off and unplug the printer before calling your dealer.

Do not let water or other foreign objects in the

printer.

•If this happened, switch off and unplug the printer before

calling your dealer.

Use only approved accessories and do not try to

disassemble, repair or remodel it for yourself.

•Call your dealer when you need these services.

•Do not touch the blade of auto cutter.

Install the printer on the stable surface.

•If the printer falls down, it can be broken and you can hurt

yourself.

Keep the desiccant out of children’s reach.

•If not, they may eat it.

If you observe a strange smoke, odor or noise from

the printer, unplug it before taking following

measures.

•Switch off the printer and unplug the set from the mains.

•After the disappearance of the smoke, call your dealer to

repair it.

TO UNPLUG

PROHIBITED

DISASSEMBLING

PROHIBITED

TO UNPLUG

PRINTER

DEALER

PRINTER

Rev. 1.00

- 4 -

Metapace T-3II

■Caution

Some semiconductor devices are easily damaged by static electricity. You should turn the

printer “OFF”, before you connect or remove the cables on the rear side, in order to guard

the printer against the static electricity. If the printer is damaged by the static electricity, you

should turn the printer “OFF”.

■Waste Electrical and Electric Equipment (WEEE)

This marking shown on the product or its literature, indicates that is should not

be disposed with other household wastes at the end of its working life, To

prevent possible harm to the environment or human health from uncontrolled

waste disposal, please separate this from other types of wastes and recycle it

responsibly to promote the sustainable reuse of material resources. Household

users should contact either the retailer where they purchased this product, or

their local government office, for details of where and how they can take this item for

environmentally safe recycling. Business users should contact their supplier and check the

terms and conditions of the purchase contract. This product should not be mixed with other

commercial wastes for disposal.

■Label Material

* Control Label: PC

* Other Labels: PET

Rev. 1.00

- 5 -

Metapace T-3II

■ Introduction

The Metapace T-3II Roll Printer are designed for use with electronic instruments such as

system ECR, POS, banking equipment, computer peripheral equipment, etc.

The main features of the printer are as follows:

1. Print at a max. speed of 250mm/s

2. Low noise thermal printing.

3. Support of USB(OnBoard Type), serial, parallel, Ethernet, Wireless LAN interfaces

4. The data buffer allows the unit to receive print data even during printing.

5. Peripheral units drive circuit enables control of external devices such as cash drawer.

6. Barcode.

7. Different print densities can be selected by DIP switches.

Please be sure to read the instruction in this manual carefully before using your new

Metapace T-3II.

※NOTE

The socket-outlet shall be near the equipment and it shall be easy accessible.

※All specifications are subjected to change without notice.

We at Metapace maintain ongoing efforts to enhance and upgrade the functions and

quality of all our products. In following, product specifications and/or user manual content

may be changed without prior notice.

Rev. 1.00

- 6 -

Metapace T-3II

■ Table of Contents

1. Setting Up the Printer....................................................................................................7

1-1 Unpacking...................................................................................................................7

1-2 Connecting the Cables ...............................................................................................8

1-2-1 Serial Interface ..............................................................................................8

1-2-2 Parallel Interface.......................................................................................... 10

1-2-3 USB (Default Type)...................................................................................... 10

1-2-4 ETHERNET Interface ...................................................................................11

1-2-5 Wireless LAN Interface.................................................................................11

1-3 Connecting the Drawer.............................................................................................12

1-4 Setting the Dip Switches...........................................................................................13

1-4-1 Serial Interface ............................................................................................ 13

1-4-2 Parallel/USB/Ethernet/Wireless LAN Interface............................................14

1-5 Installing or Replacing the Paper Roll.......................................................................15

1-6 Paper Jam................................................................................................................17

1-7 Adjustments and Settings.........................................................................................18

1-8 Using the Printer.......................................................................................................18

1-9 Connecting the computer..........................................................................................19

1-10 Connecting the Power Supply.................................................................................19

2. Self-Test........................................................................................................................20

3. Hexadecimal Dumping ................................................................................................21

4. Specification ................................................................................................................22

5. Appendix ......................................................................................................................23

5-1 Cleaning Printer........................................................................................................23

5-2 Using Wall Mount......................................................................................................23

Rev. 1.00

- 7 -

Metapace T-3II

1. Setting Up the Printer

1-1 Unpacking

Your printer box should include these items. If any items are damaged or missing, please

contact your dealer for assistance.

Metapace T-3II Cover Cable CD

Roll Paper Quick Start Guide Safety Guide AC Adapter

Power Cord Splash Proof Cover Buzzer

Cleaning Pen USB A-B Cable

Rev. 1.00

- 8 -

Metapace T-3II

1-2 Connecting the Cables

You can connect up the three cables to the printer. They all connect to the connector panel

on the back of the printer, which is shown below:

※NOTE

Before connecting any of the cables, make sure that both the printer and the host are

turned off.

1-2-1 Serial Interface

1-2-1-1 Single Interface

Drawer kick-out

connector

Power supply

connector

Serial cable

connector

Rev. 1.00

- 9 -

Metapace T-3II

1-2-1-2 Dual Interface

No.

Signal

Name

Signal Direction

Function

BODY

Frame GND

Frame Ground

TXD

Output

Transmit Data

RXD

Input

Receive Data

DSR

Input

This signal indicates whether the host computer can

receive data. (H/W flow control)

1) MARK (Logic1): The host can receive a data.

2) SPACE (Logic0): The host cannot receive a data.

3) The printer transmits a data to the host, after

confirming this signal.

4) When XON/XOFF flow control is selected, the printer

does not check this signal.

Signal GND

Signal Ground

DTR

Output

This signal indicates whether the printer is busy. (H/W flow

control)

1) MARK (Logic1): The printer is busy.

2) SPACE (Logic0): The printer is not busy.

3) The host transmits a data to the printer, after

confirming this signal.

4) When XON/XOFF flow control is selected, the host

does not check this signal.

Shield

Frame GND

Frame Ground

Serial cable

connector

Drawer kick-out

connector

Power supply

connector

Rev. 1.00

- 10 -

Metapace T-3II

1-2-2 Parallel Interface

Pin No.

Source

Compatibility Mode

Nibble Mode

Host

nStrobe

HostClk

Host / Printer

Data 0 (LSB)

Host / Printer

Data 1

Host / Printer

Data 2

Host / Printer

Data 3

Host / Printer

Data 4

Host / Printer

Data 5

Host / Printer

Data 6

Host / Printer

Data 7 (MSB)

Printer

nAck

PtrClk

Printer

Busy

PtrBusy /Data3,7

Printer

Perror

AckDataReq/Data2,6

Printer

Select

Xflag /Data1,5

Host

nAutoFd

HostBusy

GND

Printer

Logic-H

19~30

GND

Host

nInit

Printer

nFault

nDataAvail /Data0,4

GND

Printer

DK_Status

Printer

+5V

Host

nSelectIn

1284-Active

1-2-3 USB (Default Type)

Drawer kick-out

connector

Power supply

connector

Parallel cable

connector

Drawer kick-out

connector

Power supply

connector

USB cable

connector

Altri manuali per T-3II

Indice

Altri manuali Metapace Stampante

Metapace

Metapace L-1 Manuale utente

Metapace

Metapace T-1 Istruzioni per l'installazione

Metapace

Metapace T-40 Manuale utente

Metapace

Metapace T-4 Manuale di installazione e funzionamento

Metapace

Metapace T-1 Manuale di installazione e funzionamento

Metapace

Metapace T-2 Istruzioni per l'installazione

Metapace

Metapace T-3II Manuale di installazione e funzionamento

Metapace

Metapace T-1 Manuale utente

Metapace

Metapace T-3 Manuale utente

Metapace

Metapace T-3 Manuale utente

Metapace

Metapace T-40 Manuale utente

Metapace

Metapace T-1 Manuale utente

Metapace

Metapace T-4 Manuale utente

Metapace

Metapace T-311 Manuale utente

Metapace

Metapace T-4 Manuale utente

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Canon

Canon i70 Series Manuale utente

Evolis

Evolis Elypso Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Canon

Canon LASER SHOT LBP-1210 Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Canon

Canon PIXMA PRO-1 Series Manuale utente

Canon

Canon PIXMA G3560 Guida all'installazione

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Epson

Epson ET-7750 Istruzioni operative

Canon

Canon CLBR 460ps Manuale utente

Eltron

Eltron P210 Guide Manuale utente

Ricoh

Ricoh MD-P1 Manuale utente

Epson

Epson SC-F7100 series Manuale utente

Epson

Epson Stylus C40UX Manuale utente

Canon

Canon imagePASS-A2 Manuale utente

Canon

Canon S820D Manuale utente