Metra Electronics 99-7509 Manuale utente
Metra. The World’s Best Kits.®MetraOnline.com © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 8/26/19 INST99-7509
INSTALLATION INSTRUCTIONS
99-7509
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
KIT FEATURES
• DIN radio provision with pocket
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
• Painted to match factory dash
KIT COMPONENTS
• A) Radio housing • B) ISO DIN radio brackets • C) ISO DIN radio trim plate • D) ISO DDIN radio brackets • E) ISO DDIN radio trim plate • F) Pocket TOOLS REQUIRED
• Cutting tool • Phillips screwdriver
• Panel removal tool
TABLE OF CONTENTS
Dash Disassembly ...............................................2-3
Kit Assembly
–DIN radio provision with pocket ........................4
–ISO DIN radio provision with pocket ..................5
–ISO DDIN radio provision .....................................6
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness: 70-7903
Steering Wheel Control Interface: ASWC-1
A B C E
F
D
Mazda 5 (without NAV) 2006-2010
Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle
specific applications
1.800.221.0932
|
MetraOnline.com
2
DASH DISASSEMBLY
1. Unclip and remove the shifter trim
panel. (Figure A)
2. Remove (2) Phillips screws exposed
below the shifter trim panel. (Figure B)
3. Unclip and remove the center console
trim panels, then remove (1) Phillips
screw per side. (Figure C, D)
Continued on the next page
P
R
N
M-D
A/C
A/C
(Figure A) (Figure B)
(Figure C) (Figure D)
REV. 8/26/2019 INST99-7509 3
DASH DISASSEMBLY (CONT.)
4. Unclip and pull the center console
towards the rear of the vehicle, then set
aside. The console does not need to be
removed. (Figure E)
5. Remove (2) screws securing the radio
trim panel. (Figure F)
6. Unclip, unplug and remove the radio
trim panel. (Figure G)
Continue to Kit Assembly
A/C
A/C
(Figure E) (Figure F)
(Figure G)
1.800.221.0932
|
MetraOnline.com
4
DIN radio provision with pocket
1. Remove the metal DIN sleeve from the
aftermarket radio
2. Slide the sleeve into the radio housing
and secure by bending the metal locking
tabs outward. (Figure A)
3. Slide the radio into the sleeve until it
snaps into place. (Figure B)
4. Snap the pocket into the radio housing.
(Figure C)
5.
Locate the factory wiring harness and
antenna connector in the dash. Metra
recommends using the proper mating
adapter from Metra or AXXESS. Test the
radio for proper operation
.
6.
Reassemble the dash in reverse order of
disassembly to complete the installation.
KIT ASSEMBLY
(Figure A) (Figure B) (Figure C)
REV. 8/26/2019 INST99-7509 5
ISO DIN radio provision with pocket
1. Remove the metal DIN sleeve and trim
ring from the aftermarket radio
2. Secure the ISO DIN radio brackets to the
radio using screws supplied with the
radio. (Figure A)
3. Slide the radio into the radio housing
until it snaps into place. (Figure B)
4. Snap the ISO DIN trim plate onto the
front of the radio housing. (Figure C)
5. Snap the pocket into the radio housing.
(Figure D)
6.
Locate the factory wiring harness and
antenna connector in the dash. Metra
recommends using the proper mating
adapter from Metra or AXXESS. Test the
radio for proper operation
.
7.
Reassemble the dash in reverse order of
disassembly to complete the installation.
KIT ASSEMBLY
(Figure A) (Figure B)
(Figure C) (Figure D)
1.800.221.0932
|
MetraOnline.com
6
KIT ASSEMBLY
(Figure A) (Figure B) (Figure C)
ISO DDIN radio provision
1. Cut and remove the center bar from the
radio housing. (Figure A)
2. Attach the ISO DDIN radio brackets to
the inside edge of the radio housing.
(Figure B)
3. Slide the radio into the bracket/radio
housing assembly, then secure the using
screws supplied with the radio.
(Figure C)
4. Snap the ISO DDIN trim plate onto the
front of the radio housing.
(Figure C)
5.
Locate the factory wiring harness and
antenna connector in the dash. Metra
recommends using the proper mating
adapter from Metra or AXXESS. Test the
radio for proper operation
.
6.
Reassemble the dash in reverse order of
disassembly to complete the installation.
REV. 8/26/2019 INST99-7509 7
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
®
Metra recommends MECP
certified technicians
Metra. The World’s Best Kits.®MetraOnline.com © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 8/26/19 INST99-7509
INSTALLATION INSTRUCTIONS
99-7509
If you are having difficulties with the installation
of this product, contact our Tech Support line
either by phone at 386-257-1187, or email at
techsupport@metra-autosound.com. Before
doing so, look over the instruction booklet a
second time and ensure that the installation was
performed exactly as the instruction booklet
is stated. Have the vehicle apart and ready to
perform troubleshooting steps before contacting
Metra/Axxess Tech Support.
Altri manuali per 99-7509
1
Altri manuali Metra Electronics Ricevitore per auto
Metra Electronics
Metra Electronics 99-5700 Manuale utente
Metra Electronics
Metra Electronics 95-7863 Manuale utente
Metra Electronics
Metra Electronics 99-7397B Manuale utente
Metra Electronics
Metra Electronics 95-9310B Manuale utente
Metra Electronics
Metra Electronics 95-7882B Manuale utente
Metra Electronics
Metra Electronics MDF-8202-1 Manuale utente
Metra Electronics
Metra Electronics 99-5025 Manuale utente
Metra Electronics
Metra Electronics AT-807HD Manuale utente
Metra Electronics
Metra Electronics 95-7510 Manuale utente
Metra Electronics
Metra Electronics 99-8219 Manuale utente
Metra Electronics
Metra Electronics 95-8210 Manuale utente
Metra Electronics
Metra Electronics 99-8163 Manuale utente
Metra Electronics
Metra Electronics 99-9604B Manuale utente
Metra Electronics
Metra Electronics 99-7313 Manuale utente
Metra Electronics
Metra Electronics 95-2005B Manuale utente
Metra Electronics
Metra Electronics 99-3010S-LC Manuale utente
Metra Electronics
Metra Electronics 99-7519B Manuale utente
Metra Electronics
Metra Electronics 99-6527B Manuale utente
Metra Electronics
Metra Electronics Ford F-150 2009-up Manuale utente
Metra Electronics
Metra Electronics 99-5600 Manuale utente
