A 1560 Burn Link Adapter Safety and operational considerations
2
2 Safety and operational considerations
2.1 Warnings and note
In order to reach high level of operator’s safety during application of the A 1560 Burn
Link adapter as well as to keep the test accessory and equipment undamaged, it is
necessary to consider the following general warnings:
Read this user manual carefully, otherwise use of the A 1560 may be
dangerous for the operator, for test equipment or for the tested object!
If the A 1560 is used in a manner not specified in this user manual or the
manual of target test equipment, the protection provided by the A 1560 and
equipment may be impaired!
Consider all generally known precautions in order to avoid risk of electric
shock while dealing with hazardous voltages!
The A 1560 is intended for connection to secondary voltages based on
300 V CAT II overvoltage category of supply voltage of master instrument!
Never use the A 1560 with voltages higher than rated!
Service intervention is allowed to be carried out only by a competent
authorized person!
Do not use the A 1560 if any damage is noticed!
Only adequately trained and competent persons may operate the
equipment.
Eyes protection glasses required: open electric arch could emit high
energy spectrum above visible!
Liberated gases: electric arch on insulation material will generate
unpredictable liberated gasses, test area shall be proper vented and/or
liberated gases exhausted.
A 1560 is intended for intermittent operation, any overloading would lead
to impaired safety!
Note:
The A 1560 Burn Test Adapter is passive type device, there is no active
component inside.
