A 1832 Mode 3 Charging Cable Adapter Safety and operational considerations
5
2 Safety and operational considerations
2.1 Warnings and notes
In order to maintain the highest level of operator safety while carrying out various tests and
measurements METREL recommends keeping your Mode 3 Charging Cable Adapter in good
condition and undamaged. When using the adapter, consider the following general warnings:
❑Warning on the A 1832 means »Read the Instruction manual with special care
for safe operation«. The symbol requires an action!
❑If the A 1832 is used in a manner not specified in this Instruction manual or the
Instruction manual of target test equipment, the protection provided by the A 1832
and test equipment may be impaired!
❑Do not use the A 1832 if any damage is noticed!
❑Test input is intended to connection to mains test socket of electrical equipment
testers only.
❑Banana sockets are intended for test purposes only.
❑Do not connect the adapter to mains voltage.
❑Do not connect the carry out tests with mains voltage applied to the adapter!
❑All normal safety precautions have to be taken in order to avoid risk of electric
shock!
❑Service intervention is allowed to be carried out only by a competent authorized
personel!
2.2 Markings on the adapter
»Warning »Read the Instruction manual with special care to safety
operation«.
Mark on your equipment certifies that it meets requirements of all subjected EU
regulations.
Mark on your equipment certifies that it meets requirements of all subjected UK
regulations.
This equipment should be recycled as electronic waste.
