Metrohm 916 Ti-Touch Istruzioni operative
916 Ti-Touch
Tutorial
8.916.8002EN
Metrohm AG
CH-9100 Herisau
Switzerland
Phone +41 71 353 85 85
Fax +41 71 353 89 01
www.metrohm.com
916 Ti-Touch
Tutorial
8.916.8002EN 10.2011 dm/ebe
Teachware
Metrohm AG
CH-9100 Herisau
This documentation is protected by copyright. All rights reserved.
Although all the information given in this documentation has been
checked with great care, errors cannot be entirely excluded. Should you
notice any mistakes please send us your comments using the address
given above.
Documentation in additional languages can be found on
http://products.metrohm.com under Literature/Technical documenta-
tion.
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ Table of contents
916 Ti-Touch ￭￭￭￭￭￭￭￭ III
Table of contents
1Introduction 1
1.1 Structure of the tutorial ....................................................... 1
1.2 Further information .............................................................. 1
1.3 Symbols and conventions .................................................... 1
2Installation 3
2.1 Setting up and connecting the instrument ........................ 3
2.2 Mounting the propeller stirrer ............................................ 7
2.3 Inserting an electrode and buret tip ................................... 8
3Switching the instrument on and off and selecting the dia-
log language 11
3.1 Switching the instrument on and off ............................... 11
3.2 Selecting the dialog language ........................................... 12
4Fundamentals of operation 14
4.1 Touch-sensitive screen ....................................................... 14
4.2 Display and operating elements ........................................ 14
4.3 Status display ...................................................................... 16
4.4 Entering text and numbers ................................................ 16
5Setup and configuration 19
5.1 Preparing devices and material ......................................... 19
5.2 Configuring a new titrant .................................................. 19
5.3 Configuring a new sensor .................................................. 22
5.4 Configuring a printer .......................................................... 24
6Carrying out simple titrations 26
6.1 Creating a titration method ............................................... 26
6.2 Entering user name and sample data ............................... 35
6.3 Carrying out the determination ........................................ 37
6.3.1 Preparing the titration ............................................................ 37
6.3.2 Carrying out the titration ....................................................... 38
6.3.3 Displaying the results ............................................................. 39
6.3.4 Recalculating the determination ............................................. 40
6.3.5 Printing a report manually ...................................................... 42
Table of contents ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
IV ￭￭￭￭￭￭￭￭ 916 Ti-Touch
7Performing titration with supplementary functions 44
7.1 Statistical function .............................................................. 44
7.2 Saving the determination and the PC/LIMS report ......... 45
7.3 Modifying the titration parameters .................................. 47
7.4 Creating a sample table ..................................................... 49
7.5 Carrying out titrations using the sample table ................ 52
7.6 Showing the statistics data ............................................... 53
8Setting up the user administration 54
8.1 Creating a user list ............................................................. 54
8.2 Automatic login with USB flash drive ............................... 56
8.3 Login with password .......................................................... 58
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 1 Introduction
916 Ti-Touch ￭￭￭￭￭￭￭￭ 1
1 Introduction
1.1 Structure of the tutorial
This tutorial describes the installation and the first steps with the
916 Ti-Touch. You will be guided step by step through the most important
dialog pages by using a simple pH titration as an example. In addition, you
will find information regarding titrations with extended functions and for
user administration.
1.2 Further information
Detailed information concerning the 916 Ti-Touch can be found in the
manual.
1.3 Symbols and conventions
The following symbols and formatting may appear in this documentation:
Cross-reference to figure legend
The first number refers to the figure number, the sec-
ond to the instrument part in the figure.
Instruction step
Carry out these steps in the sequence shown.
Method Dialog text, parameter in the software
File ▶ New Menu or menu item
[Next] Button or key
Warning
This symbol draws attention to a possible life hazard
or risk of injury.
Warning
This symbol draws attention to a possible hazard due
to electrical current.
Warning
This symbol draws attention to a possible hazard due
to heat or hot instrument parts.
1.3 Symbols and conventions ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2￭￭￭￭￭￭￭￭ 916 Ti-Touch
Warning
This symbol draws attention to a possible biological
hazard.
Caution
This symbol draws attention to a possible damage of
instruments or instrument parts.
Note
This symbol marks additional information and tips.
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 2 Installation
916 Ti-Touch ￭￭￭￭￭￭￭￭ 3
2 Installation
2.1 Setting up and connecting the instrument
916 Ti-Touch
Mounting the support rod
2.1 Setting up and connecting the instrument ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4￭￭￭￭￭￭￭￭ 916 Ti-Touch
Plugging in the mains cable
6.2164.010
Warning
An incorrect mains voltage can damage the device.
Operate the device only with the mains voltage specified for it. Use the
supplied power supply unit exclusively.
Note
The plug of the power supply unit is protected against accidental dis-
connection of the cable by means of a pull-out protection feature. If
you wish to pull out the plug, you will first need to pull back the outer
plug sleeve marked with arrows.
Connecting a propeller stirrer 802 Stirrer
Altri manuali per 916 Ti-Touch
3
Indice
Altri manuali Metrohm Attrezzature da laboratorio
Metrohm
Metrohm 838 Advanced Sample Processor Manuale utente
Metrohm
Metrohm Autolab RDE2 Manuale utente
Metrohm
Metrohm OMNIS 2.1002.0 10 Series Manuale utente
Metrohm
Metrohm 786 Swing Head Manuale utente
Metrohm
Metrohm Titrando Manuale utente
Metrohm
Metrohm OMNIS 6.03001.120 Manuale utente
Metrohm
Metrohm 940 Professional IC Vario ONE/LPG Manuale utente
Metrohm
Metrohm 930 Compact IC Flex SeS/PP Manuale utente
Metrohm
Metrohm OMNIS Titrator Manuale utente
Metrohm
Metrohm 915 KF Ti-Touch Manuale utente
Metrohm
Metrohm 872 Manuale utente
Metrohm
Metrohm 848 Titrino plus Manuale utente
Metrohm
Metrohm Eco KF Titrator Manuale utente
Metrohm
Metrohm 815 Manuale utente
Metrohm
Metrohm 942 Extension Module Vario ChS-PP Manuale utente
Metrohm
Metrohm 774 Manuale utente
Metrohm
Metrohm 859 Titrotherm Manuale utente
Metrohm
Metrohm Titrino 784 KFP Manuale utente
Metrohm
Metrohm 860 KF Manuale utente
Metrohm
Metrohm 815 Manuale utente
Manuali Attrezzature da laboratorio popolari di altre marche
Agilent Technologies
Agilent Technologies 5800 ICP-OES Manuale utente
Endress+Hauser
Endress+Hauser Cleanfit CPA875 Manuale utente
NI
NI PXI-5422 Manuale
Collomix
Collomix Aqix Manuale utente
SPEX SamplePrep
SPEX SamplePrep 6875 Freezer/Mill Series Manuale utente
Ocean Insight
Ocean Insight FLAME-NIR+ Manuale utente
