Metrohm Inline Ultrafiltration 2 Manuale utente
IC equipment
IC equipment: Inline Ultrafiltration 2 - push mode
Manual
8.0108.8026EN/2020-05-22
Metrohm AG
CH-9100 Herisau
Switzerland
Phone +41 71 353 85 85
Fax +41 71 353 89 01
www.metrohm.com
IC equipment
IC equipment: Inline Ultrafiltration 2
- push mode
6.05330.110
Manual
8.0108.8026EN/2020-05-22
Technical Communication
Metrohm AG
CH-9100 Herisau
This documentation is protected by copyright. All rights reserved.
This documentation has been prepared with great care. However, errors
can never be entirely ruled out. Please send comments regarding possible
errors to the address above.
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ Table of contents
IC equipment: Inline Ultrafiltration 2 - push mode ￭￭￭￭￭￭￭￭ III
Table of contents
1 Introduction 1
1.1 Description of the IC equipment: Inline Ultrafiltration 2
- push mode .......................................................................... 1
1.2 About the documentation ................................................... 1
1.3 Symbols and conventions .................................................... 2
2 Mode of operation of ultrafiltration 3
2.1 Mode of operation of the push mode ............................... 3
2.2 Mode of operation of the pull mode ................................. 3
2.3 Sample volume ...................................................................... 4
3 Overview 5
3.1 Parts of the IC equipment: Inline Ultrafiltration 2 - push
mode ...................................................................................... 5
3.2 Flow diagram of the IC equipment: Inline Ultrafiltration
2 - push mode ....................................................................... 7
3.3 Components of the ultrafiltration cell ................................ 8
3.4 Connectors of the ultrafiltration cell ................................... 9
4 Installation 10
4.1 Preparing the ultrafiltration cell ........................................ 10
4.2 Connecting the ultrafiltration cell ..................................... 14
4.3 Inserting the ultrafiltration cell ......................................... 17
4.4 Purging the ultrafiltration cell ........................................... 18
5 Operation 19
5.1 Ultrafiltration time and sample volume ............................ 19
5.2 Selecting the filtration membrane .................................... 19
6 Maintenance 21
6.1 Service life of the filtration membrane ............................. 21
6.2 Replacing the filtration membrane ................................... 22
7 Technical specifications 24
7.1 Ultrafiltration cell 2 (6.02729.110) ................................... 24
7.2 Filtration membrane 1 (6.2714.020) ................................. 24
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ Table of figures
IC equipment: Inline Ultrafiltration 2 - push mode ￭￭￭￭￭￭￭￭ V
Table of figures
Figure 1 IC equipment: Inline Ultrafiltration 2 - push mode – Parts .................. 5
Figure 2 Flow diagram of the IC equipment: Inline Ultrafiltration 2 - push
mode ................................................................................................ 7
Figure 3 Ultrafiltration cell – Parts .................................................................... 8
Figure 4 Ultrafiltration cell – Connectors ......................................................... 9
Figure 5 push mode – Connecting the ultrafiltration cell ................................ 14
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 1 Introduction
IC equipment: Inline Ultrafiltration 2 - push mode ￭￭￭￭￭￭￭￭ 1
1 Introduction
1.1 Description of the IC equipment: Inline Ultrafiltra-
tion 2 - push mode
The IC equipment: Inline Ultrafiltration 2 - push mode (6.05330.110) con-
tains all accessories required for Inline Ultrafiltration directly before injec-
tion.
The main component of the IC equipment: Inline Ultrafiltration 2 - push
mode is the ultrafiltration cell. This cell is suitable for the filtration of sam-
ples with high requirements regarding filtration effectiveness and sample
throughput.
2 peristaltic pumps are needed in addition to the IC equipment: Inline
Ultrafiltration 2 - push mode for pumping the sample and the filtrate.
1.2 About the documentation
This manual describes the correct assembly and maintenance of the IC
equipment: Inline Ultrafiltration 2 - push mode, the installation of the
capillary connections and the assembly of the holder to the sample
changer.
The installation of the peristaltic pump is not described in this manual. The
installation of the peristaltic pump is described in the respective manuals
for the ion chromatograph or for the sample changer.
CAUTION
Please read through this documentation carefully before putting the IC
equipment: Inline Ultrafiltration 2 - push mode into operation. The doc-
umentation contains information and warnings which the user must
follow in order to ensure safe operation of the IC equipment: Inline
Ultrafiltration 2 - push mode.
1.3 Symbols and conventions ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2￭￭￭￭￭￭￭￭ IC equipment: Inline Ultrafiltration 2 - push mode
1.3 Symbols and conventions
The following symbols and formatting may appear in this documentation:
Cross-reference to figure legend
The first number refers to the figure number, the sec-
ond to the instrument part in the figure.
Instruction step
Carry out these steps in the sequence shown.
Method Dialog text, parameter in the software
File ▶ New Menu or menu item
[Next] Button or key
WARNING
This symbol draws attention to a possible life-threat-
ening hazard or risk of injury.
WARNING
This symbol draws attention to a possible hazard due
to electrical current.
WARNING
This symbol draws attention to a possible hazard due
to heat or hot instrument parts.
WARNING
This symbol draws attention to a possible biological
hazard.
CAUTION
This symbol draws attention to possible damage to
instruments or instrument parts.
NOTE
This symbol highlights additional information and
tips.
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali Metrohm Attrezzature da laboratorio
Metrohm
Metrohm 869 Manuale utente
Metrohm
Metrohm 751 GPD Titrino Manuale utente
Metrohm
Metrohm 850 Professional IC Manuale utente
Metrohm
Metrohm 760 Manuale utente
Metrohm
Metrohm 810 Manuale utente
Metrohm
Metrohm 848 Titrino plus Manuale utente
Metrohm
Metrohm Professional IC Vario 940 Manuale utente
Metrohm
Metrohm 883 Basic IC plus Manuale utente
Metrohm
Metrohm 838 Advanced Sample Processor Manuale utente
Metrohm
Metrohm Misa Manuale utente
Metrohm
Metrohm 753 Manuale utente
Metrohm
Metrohm OMNIS 2.1006.0010 Manuale utente
Metrohm
Metrohm Titrino 784 KFP Manuale utente
Metrohm
Metrohm 885 Compact Oven SC Manuale utente
Metrohm
Metrohm 736 GP Titrino Manuale utente
Metrohm
Metrohm OMNIS Titrator Manuale utente
Metrohm
Metrohm ProfIC Vario 6 Anion Manuale utente
Metrohm
Metrohm 940 Professional IC Vario ONE/ChS/LPG Manuale utente
Metrohm
Metrohm NIRS Vial Heater Manuale utente
Metrohm
Metrohm 858 Manuale utente
Manuali Attrezzature da laboratorio popolari di altre marche
Agilent Technologies
Agilent Technologies 5800 ICP-OES Manuale utente
Endress+Hauser
Endress+Hauser Cleanfit CPA875 Manuale utente
NI
NI PXI-5422 Manuale
Collomix
Collomix Aqix Manuale utente
SPEX SamplePrep
SPEX SamplePrep 6875 Freezer/Mill Series Manuale utente
Ocean Insight
Ocean Insight FLAME-NIR+ Manuale utente
