Michel's R200 Manuale utente

Integrated Wireless Technology

R200

Hardware –0.7.0 / Firmware –1.1.15

15-March-2018

Contents

1.0.0 Basic Information and Handling...........................................................................................................4

1.0.1 Remote Certification........................................................................................................................5

1.1.0 Charging/Battery Indicator ..............................................................................................................6

2.0.0 Home Screen........................................................................................................................................6

3.0.0 Setup Menu.......................................................................................................................................... 6

3.1.0 Adding Units to the Remote ............................................................................................................7

3.1.1 How to add an EZ Opener............................................................................................................7

3.1.1.1 How to add an EZ Opener and ‘ConveyHawk’ Conveyor Combination System .......................8

3.1.2 How to add a T200 or T210 Tarp Receiver System ...................................................................... 9

3.1.2.1 How to add a T200 Tarp Receiver.............................................................................................9

3.1.2.2 How to add a T210 Tarp Receiver...........................................................................................10

3.1.3 How to add A200 and A210 Auger or Conveyor Receiver Systems...........................................11

3.1.3.1 How to add an A200 Auger Receiver ......................................................................................11

3.1.3.2 How to add an A210 Auger or Conveyor System....................................................................11

3.1.4 How to add an S210 Swing Auger Receiver ...............................................................................11

3.1.5 How to add a MIC210 Side Chute System..................................................................................12

3.2.0 Changing the Shutdown Time of the Remote................................................................................13

3.3.0 Changing the Network ID...............................................................................................................13

3.4.0 Fleet and B-Train Grouping............................................................................................................13

3.4.1 Setting up Groups ......................................................................................................................13

3.4.2 Accessing the Groups Sub-Menu ...............................................................................................14

3.4.3 Creating a New Group................................................................................................................14

3.4.4 Selecting a Group.......................................................................................................................15

3.4.5 Changing the Group Name.........................................................................................................15

3.4.6 Editing an Existing Group...........................................................................................................15

3.5.0 Locating the Hardware and Firmware Version ..............................................................................15

4.0.0 Tarp Menu..........................................................................................................................................16

4.1.0 Operating the Tarp.........................................................................................................................16

4.2.0 Tarp Edit Menu ..............................................................................................................................17

4.2.1 Removing a Tarp Receiver..........................................................................................................17

4.2.2 Reversing Motor Direction.........................................................................................................17

4.2.3 Changing the Unit Name............................................................................................................17

4.2.4 Locating the Hardware and Firmware Version ..........................................................................18

15-March-2018

5.0.0 Chute Opener Menu ..........................................................................................................................18

5.1.0 Operating an EZ Opener Chute Opener.........................................................................................19

5.2.0 EZ Opener Chute Opener Edit Menu .............................................................................................19

5.2.1 Setting the Limits of the EZ Opener Chute Opener ...................................................................19

5.2.1.1 Resolving Improper Positon of Chute on Installation .............................................................20

5.2.2 Changing the Unit Name............................................................................................................21

5.2.3 Removing an EZ Opener Chute Opener .....................................................................................22

5.2.4 Setting Up the Indicator Light ....................................................................................................22

5.2.5 Setting a Midway Stop Point......................................................................................................23

5.2.6 Locating the Hardware and Firmware Version ..........................................................................24

5.3.0 MIC210 Side Chute Opener System...............................................................................................24

5.3.1 MIC210 Side Chute Operation ...................................................................................................25

5.3.2 MIC210 Side Chute Edit Menu...................................................................................................25

5.3.2.1 Removing a Side Chute System Receiver................................................................................25

5.3.2.2 Reversing Motor Direction......................................................................................................25

5.3.2.3 Changing the Unit Name.........................................................................................................26

5.3.2.4 Locating the Hardware and Firmware Version .......................................................................26

6.0.0 Auger System Menu...........................................................................................................................26

6.1.0 Operating an Auger or ConveyHawk System.................................................................................27

6.1.1 Operating an Auger System .......................................................................................................27

6.1.2 Operating a Conveyor ‘ConveyHawk’ System............................................................................28

6.2.0 Auger Edit Unit Menu ....................................................................................................................28

6.2.1 Removing an Auger Unit ............................................................................................................28

6.2.2 Programming a Conveyor, 2 Auger or 3 Auger System..............................................................29

6.2.3 ‘ConveyHawk’ conveyor and EZ Opener Combination Remote Settings...................................29

6.2.4 Changing the Unit Name............................................................................................................30

6.2.5 Locating the Hardware and Firmware Version ..........................................................................30

7.0.0 Auxiliary System Menu ......................................................................................................................30

7.1.0 Adding a Light Kit to the Remote...................................................................................................30

7.1.1 Creating a New Lights Screen.....................................................................................................31

7.1.2 Adding a Light Kit to the Lights Screen ......................................................................................31

7.1.3 Operating Lights with the Lights Screen ....................................................................................31

7.1.4 Accessing Each Individual Light Unit..........................................................................................32

7.2.0 Controlling the Chute Opener Light with the Remote...................................................................33

15-March-2018

7.3.0 Controlling Multiple Light Units at the Same Time........................................................................33

7.4.0 Controlling Multiple Light Units Manually from the T210 Remote Box ........................................34

7.5.0 Operating the Swing Auger............................................................................................................35

7.6.0 Swing Auger Edit Menu..................................................................................................................35

7.6.1 Removing a Swing Auger Receiver.............................................................................................35

7.6.2 Reversing Motor Direction.........................................................................................................36

7.6.3 Changing the Unit Name............................................................................................................36

7.6.4 Locating the Hardware and Firmware Version ..........................................................................36

8.0.0 MIC 210 Grain Truck Component Operation.....................................................................................37

8.1.0 Grain Truck Tarp Menu ..................................................................................................................37

8.2.0 Chute Gate Opener Menu..............................................................................................................37

8.2.1 Operating the Chute Gate Opener.............................................................................................38

8.2.2 Chute Gate Opener Edit Menu ..................................................................................................38

8.2.2.1 Removing the Chute Gate Opener Control Box......................................................................38

8.2.2.2 Reversing Chute Gate Opener Direction.................................................................................39

8.2.2.3 Changing the Unit Name.........................................................................................................39

8.3.0 Hoist Menu.....................................................................................................................................40

8.3.1 Operating the Hoist....................................................................................................................40

8.3.2 Hoist Edit Menu .........................................................................................................................40

8.3.2.1 Removing the Hoist Control Box.............................................................................................41

8.3.2.2 Reversing Hoist Direction........................................................................................................41

8.3.2.3 Changing the Unit Name.........................................................................................................41

9.0 Warranty ...............................................................................................................................................42

15-March-2018

1.0.0 Basic Information and Handling

R200 Layout Overview

1. Power Button –Press to turn power on, Press and hold for 3 seconds to turn power off

2. Enter Button –Used to select a highlighted option on the screen

3. Up and Down Scroll Buttons –Used to move the cursor on the screen up and down

4. Operating Buttons –Used to activate or control a receiver box (ex. open tarp)

5. Function Buttons –Used to enter Tarp, Chute, Auger, or Auxiliary menu

6. Charging Port –Use micro USB chargers supplied by Michel’s Industries

7. Charging Indicator Light –Red & Green indicates charging, Green indicates fully

charged

Handle the remote as if it were your cell phone.

15-March-2018

For optimal remote performance and

range, it is recommended you grip the

remote as shown and hold it at least

one foot away from your body to

allow the wireless signal to properly

disperse from the remote.

1.0.1 Remote Certification

The enclosed device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (i.) this device may not cause harmful interference and (ii.) this device must accept any

interference received, including interference that may cause undesired operation.

Contains FCC ID: MCQ-XB900HP

Contains IC: 1846A-XB900HP

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance

with the instruction manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the user will be

required to correct the interference at their expense.

15-March-2018

1.1.0 Charging/Battery Indicator

The battery indicator is present on every screen except when ‘Tarps’ is highlighted on

the Home screen. It will show a full, half or empty battery.

The typical life expectancy of the battery is 10 hours of continued use. When the

battery icon starts to flash red there are approximately 10 minutes of on time before

the remote battery will die. It is recommended when the battery indicator shows the

half battery symbol, to charge the remote at your earliest convenience.

While charging the battery, the battery indicator on the screen will show a lightning

bolt inside of the Battery Icon. Only use chargers which have an output of 5.0V and

1.0A. A green and red light will also be illuminated above the Battery Icon on the

right side of the remote. When the battery is fully charged only the green light will illuminate.

2.0.0 Home Screen

The remote starts on the Home screen once it has been powered on. It will take a

moment after the screen appears to finish loading and allow any user input.

-While in the home screen, scrolling up and down using the arrow keys will allow

access to select Tarps, Chutes, Augers, Auxiliary or Setup. If the remote is not

paired with any receivers (Tarps, Chutes, Augers, or Auxiliaries) it will not enter

into any of the menus.

-Another way to enter into any of the Tarps, Chutes, Augers, or Auxiliaries which

are paired to the remote is by simply pressing the corresponding function key.

-The battery symbol in the top right corner appears on most screens and

indicates the battery level.

3.0.0 Setup Menu

The setup menu can be used to:

1. Teach the remote to communicate with a Tarp, Chute Opener, and/or Auger

receiver so the remote will control it. When adding multiple Tarps, Chute

Openers, or Auxiliary Augers the remote will add them in the order in which

they are paired to the remote. Ex. If pairing a 2 hopper trailer which has

Chute Openers, teach the front hopper to the remote first and it will be called

Chute 1 and then the back hopper will be paired as Chute 2. Therefore, when

adding devices make sure to add them to the remote in the order in which

you would like them to appear on the remote.

2. Adjust the shutdown time of the remote from 5 to 15 or 30 minutes. The shutdown time is

the time the remote will stay on if no buttons are pushed before automatically shutting off.

This feature conserves the battery if the remote is left on.

TARPS

CHUTES

AUGERS

SETUP

AUXILIARY

TARPS

CHUTES

AUGERS

SETUP

AUXILIARY

TARPS

CHUTES

AUGERS

SETUP

AUXILIARY

15-March-2018

3. Changing the network ID allows multiple remotes to be added to the same network. In

order for a Tarp, Chute Opener or Auger receiver to talk to multiple remotes the network ID

must be the same. When the remotes are assembled the network ID’s are different. Even if

the remotes have the same Network ID, they still have to be taught to the each receiver

for them to work. Having different Network ID’s provides more security and limits cross

talking.

4. Find the version of Hardware and Firmware of the remote.

To enter the Setup menu, the remote must be on the Home page. Use the up and

down arrows to move the cursor to select / highlight ‘Setup’and then press Enter.

To return to the Home Screen press the button located under ‘EXIT’

3.1.0 Adding Units to the Remote

When the remote adds multiple Tarps, Chute Openers, or Augers it will add them in

the order in which they are paired to the remote. Ex. If pairing with a 2 hopper

trailer which has Chute Openers, teach the front hopper to the remote first and it will

be called Chute 1 and then the back hopper will be taught as Chute 2.

If a unit is removed the next unit added will use the first available spot. Ex. If 2 Chute Openers were

paired to the remote, Chute 1 & Chute 2 then Chute 1 is removed, the next Chute Opener added will be

Chute 1 again and not Chute 3.

Note: When adding devices make sure to add them in the order in which you

would like them to appear on the remote.

3.1.1 How to add an EZ Opener

Enter into the Setup Menu from the Home Screen. Use the up and down arrows to

move the cursor to select/highlight ‘Setup’and then press Enter.

After entering the Setup menu, make sure ‘ADD UNIT’is highlighted.

Go to the chute opener which is to be programmed. Use a flat screw driver and pop

off the plastic plug on the back side where “Teach” has been embossed around it.

Press and hold the button for at least 7 seconds before pressing Enter on

the remote. The Teach Button on the chute opener must be held on

continuously until the remote is paired. If it is paired properly, it will say

CHUTE 1 ADDED above the add unit line.

Press plastic plug back into the hole in the cover. Press Exit to return to

the home screen.

TEACH BUTTON

SETUP 1

ADD UNIT

15 MIN SHUTDOWN

CHANGE NETWORK ID

68B0

H:0.8.3 F:0.8.2

EXIT

EDIT SWITCHBOX

SETUP 1

ADD UNIT

15 MIN SHUTDOWN

CHANGE NETWORK ID

68B0

H:0.8.3 F:0.8.2

EXIT

EDIT SWITCHBOX

CHUTE ADDED

15-March-2018

3.1.1.1 How to add an EZ Opener and ‘ConveyHawk’ Conveyor Combination System

If a trailer has both EZ Openers and the wireless ‘ConveyHawk’ Conveyor

system, the ConveyHawk system controls will be connected to and integrated

with the EZ Opener controls. The ConveyHawk will most often be connected to

the front chute opener. The remote will come from the factory with this chute

opener already paired to it. However, the chute opener will require the limits to

be set after it has been taught to the remote, see Section 5.2.1.

The procedure to add the EZ Opener and ‘ConveyHawk’ Conveyor Combination

System to the R200 remote is similar to that of a standalone EZ Opener; see

Section 3.1.1.

Enter into the Setup Menu from the Home Screen. Use the up and down arrows

to move the cursor to select/highlight ‘Setup’and then press Enter.

After entering the Setup menu, make sure ‘ADD UNIT’is

highlighted.

Go to the chute opener which has the connection for the conveyor

built into it. Use a flat screw driver and pop off the plastic plug on

the back side where “Teach” has been embossed around it.

Press and hold the button for at least 7 seconds before pressing

Enter on the remote. The Teach Button on the chute opener must

be held on continuously until the remote is paired. If it is paired properly, it will say GEN UR ADDED

above the add unit line.

Press the plastic plug back into the hole in the cover. Press exit to return to the home screen.

After pairing the chute opener to the remote, two screens will become accessible in the home screen.

The chute screen will now be available. It operates in the same way as a regular chute opener; see

Section 5.0.0 for operating instructions. Also, a conveyor screen under the ‘AUGERS’ menu will become

available; see Section 6.1.1 for operating instructions.

GEN UR ADDED

SETUP 1

H:0.7.0 F:0.9.03

ADD UNIT

15 MIN SHUTDOWN

CHANGE NETWORK ID

68B0

EXIT

EDIT SWITCHBOX

TEACH BUTTON

15-March-2018

3.1.2 How to add a T200 or T210 Tarp Receiver System

3.1.2.1 How to add a T200 Tarp Receiver

Enter into the Setup Menu from the Home Screen. Use the up and down arrows to move the cursor to

select / highlight Setup and then press Enter.

Upon entering the Setup menu, ADD UNIT should be highlighted.

Go to the T200 Tarp Receiver Box and remove the bottom 3 screws completely from the enclosure.

Loosen the top 3 screws so the lid can be tilted up. It may be necessary to use a flat screw to pop the lid

loose.

With the lid tilted open, press the small black button on the inside of the lid and hold the button for a

minimum of 7 seconds before pressing Enter on the remote. The teach button must be held on

continuously until the remote is paired. If it is paired properly, it will say TARP ADDED above the ‘ADD

UNIT’line.

Secure the lid back onto the T200 control box using the 6 screws.

Press Exit to return to the home screen.

SETUP 1

ADD UNIT

15 MIN SHUTDOWN

CHANGE NETWORK ID

68B0

H:0.8.3 F:0.8.2

EXIT

EDIT SWITCHBOX

TARP ADDED

Indice

Manuali Telecomando popolari di altre marche

Panasonic

Panasonic EUR7622KB0 Manuale utente

Bang & Olufsen

Bang & Olufsen Beo4 Manuale utente

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuale utente

Multiplex

Multiplex PROFI TX 9 Manuale utente

One Remote

One Remote RMB4 Manuale utente

FUTABA

FUTABA 9ZAP - PART2 Manuale utente

HR Matic

HR Matic HR MULTI 3 Manuale utente

Yamaha

Yamaha ACC-GNRST-30-20 Manuale utente

EisSound

EisSound KBSOUND Manuale utente

Marantz

Marantz RC101 Manuale utente

Conrad

Conrad FS20 TC6 Manuale utente

Anritsu

Anritsu MP1777A Manuale utente

Niles

Niles WVC100 Guida alla risoluzione dei problemi

RCA

RCA RCU1300 Manuale utente

Bang & Olufsen

Bang & Olufsen BEO6 Manuale utente

GE 94901 Manuale utente

Onbon

Onbon YQ1-75 Manuale utente

FUTABA

FUTABA R7108SB Istruzioni per l'installazione