Micron 6WX1H Manuale utente
Video Wall Installation Manual – 6WX1H Page 2
Rev. 09/2019
Table of Contents
Important Safety Instructions.................................................................................................................................... 3
Package Contents, included and optional items ............................................................................................... 4, 5, 6
Step 1. Attaching Mounting Brackets and Key Measurements........................................................................... 7, 8
Step 2. Inserting Square Nuts into Rails................................................................................................................... 9
Step 3. Building frame structure.......................................................................................................... 10, 11, 12 ,13
Step 4. Determining Reference Height and Fastening First Row of Wall Brackets ................................... 14, 15, 16
Step 5. Mounting the Wall Support....................................................................................................................... 17
Step 6. Ensuring Frame Structure is Straight and Plumb ...................................................................................... 18
Step 7. Mounting Monitors to Frame Structure.................................................................................................... 19
Step 8. Monitor Alignment .............................................................................................................................. 20, 21
Step 9. Installing Monitor Security Locks (Optional Item)..................................................................................... 22
Step 10. Accessing Behind Monitors and Servicing Monitors................................................................................. 22
Warranty.................................................................................................................................................................. 23
Video Wall Installation Manual – 6WX1H Page 3
Rev. 09/2019
Important Safety Instructions
Use the following safety guidelines to help protect you during the installation, especially with installing
the monitors to mount and when access to monitors is required to ensure your own personal safety.
•Read all the installation instructions before installing the mounting solution.
•Read and follow all important safety instructions.
•Depending on size of video mount solutions, two (2) or more persons may be required for
installation.
•Please ensure all safety precautions are followed when working with heights.
CAUTION: Before you begin any of the installation procedures read and follow the
warnings and important safety instructions within the manual.
WARNING! FAILURE TO FOLLOW INSTRUCTIONS ON ACCESSING BEHIND
MONITORS AND SERVICING MONITORS MAY RESULT IN POSSIBLE PERSONAL
INJURY AND DAMAGE TO MONITORS DUE FROM FALLING!
WARNING! BEFORE INSTALLING THE MOUNT, ENSURE THE WALL IS
STRUCTUALLY SOUND AND ABLE TO PROPERLY SUPPORT THE COMBINED
WEIGHT OF MOUNT AND MONITORS!
Video Wall Installation Manual – 6WX1H Page 4
Rev. 09/2019
Package Contents - Included
Description Configuration Qty Picture
Top Rail 6W X 1H 3
Part A
Bottom Rail 6W X 1H 3
Part B
Middle Frame 6W X 1H 3
Part MF
Side Rail - Black 6W X 1H 2
Part S
Wall Brackets 6W X 1H 16
Part E
Panel VESA Bracket
(includes micro
adjustments)
6W X 1H 12
Part D
Square Nut with
Screw 6W X 1H 16
Part N Part N2
Mounting Hardware Kit 6W X 1H 6
Part H
Shim Kit
(Assorted sizes) 6W X 1H 2
Part SK
Video Wall Installation Manual – 6WX1H Page 5
Rev. 09/2019
Kick Stand 6W X 1H 6
Part KS
Monitor Security
Lock 6W X 1H 6
Part MD1026
N/R = Not Required
Video Wall Installation Manual – 6WX1H Page 6
Rev. 09/2019
Optional Items
Description
Part Number
Qty
Picture
Laser Installation Kit MD1025 1
Cable Tie Clamp MD1006 10
Nut Holder for M6
Nut MD1007 10
Cover Strips
(6’ lengths)
MD1001 - Grey
MD1002 - Red
MD1003 - Alum
MD1004 - Black
MD1005 - Yellow
1
Kick Stands MD1011 1
Shims
MD1022 - 1/8”
MD1023 - 1/4”
MD1024 - 1/16”
6
M6 Turn Nut & Screw
(For mounting
electrical boxes and
brackets)
MD1014 –M6
MD1015 – M8
10
Monitor Security
Lock MD1026 1
Video Wall Installation Manual – 6WX1H Page 7
Rev. 09/2019
Step 1 – Attaching mounting brackets and key measurements
Instructions
Diagrams
•
Remove monitors to be installed from
their cartons and attach the Panel VESA
Brackets (Part D) to back of monitors at
the VESA mounts as shown in figure 1A.
Mounting hardware is provided (Part
H).
Note: If monitor orientation is portrait
mode attach Mounting Brackets to back of
monitors with that orientation.
•The mounting hardware consists of
various lengths of M6 and M8 screws to
accommodate different manufacturer
specifications.
•If M6 screws are required, you will
need to use the white M8 sleeves
provided by inserting an M6 screw into
the white sleeve and then attaching
Panel VESA Bracket to back of monitor.
See figure 1B.
Fig. 1A
Fig. 1B
•
Measure the difference between top of
video display panel and bottom of top
mounting bracket as shown in figure
1C.
Distance: _________
This is referred to as measurement A.
Fig. 1C
•Measure the total height of video
display panel as shown on figure 1D.
Distance: _________
This is referred to as measurement B.
Fig. 1D
Video Wall Installation Manual – 6WX1H Page 8
Rev. 09/2019
•Measure the distance between bottom
of upper panel mount clamp to centre
of micro adjustment screw as shown in
figure 1E.
Distance: _________
This is referred to as measurement C.
Fig. 1E
Mounting point for top
rail
Inward/Outward micro
adjustment screw rests
on bottom rail
VESA points of panel
Video Wall Installation Manual – 6WX1H Page 9
Rev. 09/2019
Step 2 –Inserting Square Nuts into rails
Instructions
Diagrams
•
Find a flat surface area, ideally on floor,
to build the entire frame structure.
•
If mount will be used with monitors having
screen size of 55”or greater the Top and
Bottom rails have been cut in half to make
shipping easier.
•Join the 2 sections of Top Rails together as
shown in figure 2A using 4mm Allen
wrench.
•Repeat for the Bottom Rails.
Fig. 2A
•
With each Top and Bottom Rail, slide
the Square Nut (Part N) into bottom t-
slot for each rail supplied. See figures
2A and 2B.
•Insert the following number of Square
Nuts into each top and bottom rail as
indicated below:
Model
Top Rail
Bottom Rail
6W x 1H
3
1
•The Square Nuts will be loose inside the
rail for time being.
Fig. 2A Fig. 2B
Video Wall Installation Manual – 6WX1H Page 10
Rev. 09/2019
Step 3 – Building Frame Structure
•Position one of the Top Rails (Part A),
Middle Frame (Part MF), Bottom Rails
(Part B), Side Rail (Part S) as shown in
figure 3A.
•Slide the Top Rail (Part A) into the t-slot
of the Side Rail (Part S) and Middle
Frame (Part MF) by sliding the QC
connector into the rails. See figure 3B.
IMPORTANT: Ensure the Square Nuts
previously inserted in bottom of rails do
not fall out.
•The Top Rail must be positioned the
same distance as measurement A from
the very top of Side Rail. See figure 3D.
Example:
If measurement A is 5cm, then the Top
Rail must be positioned 5 cm from top
of Side Rail.
•Once in place, tighten the hex bolt that
is on the left side of Top Rail using a
6mm hex key (not supplied). See figure
3C.
IMPORTANT
Do not tighten the hex bolt on right side
yet.
Fig. 3A
Fig. 3B Fig. 3C
Fig 3D
Indice
Altri manuali Micron Rack e supporto
