Micron M2T4249 Manuale utente
www.microndisplaysolutions.com
Digital Menu Board
Wall Mount
Installation Instructions
M2T4249
M3T4249
Digital Menu Board 4249 Wall Mount Installation Manual Page 2
Rev. 04/19
Table of Contents
Important Safety Instructions............................................................................................................................. 3
Models and Specifications.................................................................................................................................. 4
Package Contents .............................................................................................................................................. 5
Step 1 – Using Two (2) Wide or Three (3) Wide Menu Board Mount Only...................................................... 6
Step 2A – Joining 2W and 3W Menu Board Mounts to make 4W or Greater Mount (42” & 43”) .................... 7
Step 2B – Joining 2W and 3W Menu Board Mounts to make 5W or Greater Mount (46”+)............................. 8
Step 3 – Fastening Temporary Wall Brackets to Wall ...................................................................................... 9
Step 4 – Mounting to Wall.............................................................................................................................. 10
Step 5 – Tilt Mechanism Adjustment ............................................................................................................. 11
Step 6 – Attaching End Caps ........................................................................................................................... 11
Step 7 – Attaching VESA Panel Brackets & Mounting Panels......................................................................... 12
Step 8 – Installing Monitor Security Locks (Optional Item)............................................................................ 13
Step 9 – Installing Cable Tie Clamps (Optional Item)...................................................................................... 13
Warranty........................................................................................................................................................... 14
Digital Menu Board 4249 Wall Mount Installation Manual Page 3
Rev. 04/19
Important Safety Instructions
Use the following safety guidelines to help protect you during the installation, especially with installing the
video panels to mount and when access to panels is required to ensure your own personal safety.
•Read all the installation instructions before installing the mounting solution.
•Read and follow all important safety instructions.
•Depending on size of mount, two (2) persons may be required for installation.
•Please ensure all safety precautions are followed when working with heights.
CAUTION: Before you begin any of the installation procedures read and follow the warnings and
important safety instructions within the manual.
WARNING!
FAILURE TO FOLLOW INSTRUCTIONS ON ACCESSING BEHIND PANELS AND SERVICING
PANELS MAY RESULT IN POSSIBLE PERSONAL INJURY AND DAMAGE TO VIDEO PANELS DUE
FROM FALLING!
BEFORE INSTALLING THE MOUNT, ENSURE THE WALL IS STRUCTUALLY SOUND AND ABLE TO
PROPERLY SUPPORT THE COMBINED WEIGHT OF MOUNT AND VIDEO PANELS!
Cat No. M2T4249 and M3T4249
Tested and Evaluated to CSA Model Code SPE-1000, Clause 6.2.8.
Testé et évalué selon le code de modèle CSA SPE-1000, article 6.2.8
Warning: Maximum hanging load 100 Kg for M2T4249 and 120 Kg for M3T4249.
Attention: Charge maximale suspendue 100 Kg pour M2T4249 et 120 Kg pour M3T4249.
Digital Menu Board 4249 Wall Mount Installation Manual Page 4
Rev. 04/19
Models and Specifications
Product
M2T4249
M3T4249
Type
2 Wide Tilt Menu Board 3 Wide Tilt Menu Board
Screen Sizes
42” to 49”
Tilt
0 to 15 Degrees
Vesa
200 to 400
Security Locks
Included
Weight Load
100 kg 120 kg
Dimensions (WxHxD)
With 00Tilt 1800 x 240 x 75mm 2750 x 240 x 75
Dimensions (WxHxD)
With 150Tilt 1800 x 240 x 120mm 2750 x 240 x 120mm
Note:
For 42” to 43” screens sizes, the use of Joiner Rail Assembly not required.
For greater than 43” screen sizes when joining Digital Menu Board
mounts together to make overall 4 wide or larger mount please add
400mm at each joining point to arrive at overall length.
Digital Menu Board 4249 Wall Mount Installation Manual Page 5
Rev. 04/19
Package Contents
Description
Model
Qty
Picture
Preassembled Mount
2T4249 1
Part A
3T4249 2
Joiner Rail Assembly
2T4249
4
Part JR
3T4249
Panel VESA Bracket
2T4249 4
Part B
3T4249 6
End Cap
2T4249
8
Part EC
3T4249
Hardware
2T4249 2
Part H
3T4249 3
Cable Tie Clamp
2T4249 3
Part CC
3T4249 3
Monitor Security Lock
2T4249 2
Part SL
3T4249 3
Wall Bracket with
hardware
(Temporary)
2T4249 3
Part WB
3T4249 4
N/R = Not Required
Digital Menu Board 4249 Wall Mount Installation Manual Page 6
Rev. 04/19
Step 1 – Using 2 Wide or 3 Wide Menu Board Mount Only
Instructions
Diagrams
Do Not Remove Zip Ties
Holding Mount Yet!.
For a two (2) wide
mount proceed to Step
3.
Fig. 1A
Do Not Remove Zip Ties
Holding Mount Yet!.
For a three (3) wide
mount the left and right
sections need to be
joined together using
four (4) joiner bars
supplied.See figure 1B.
Once they are joined
together, tighten using
4mm Allen wrench. See
figure 1C, and 1D.
Fig. 1B
Fig. 1C Fig. 1D
Digital Menu Board 4249 Wall Mount Installation Manual Page 7
Rev. 04/19
Step 2A – Joining 2W & 3W Mounts to make 4W or > (For 42” & 43”)
Mount Type
Instructions Diagrams
For configurations
requiring 4W or 6W.
•Join a 2W+2W menu
board mount by using
Joiner Bars removed
from Joiner Rail
Assemblies provided
(Part JRS). See fig.2A.
•Place Joiner Bars as
shown in fig. 2B.
•Tighten screws using
4mm hex wrench once
they are in place. See
fig. 2C and 2D.
Fig. 2A
Fig. 2B
Fig. 2C Fig. 2D
For configurations
requiring 5W.
•Join a 2W+3W menu
board mount by using
Joiner Bars removed
from Joiner Rail
Assemblies provided
(Part JRS). See fig.2A.
•Place Joiner Bars as
shown in fig. 2E.
•Tighten screws using
4mm hex wrench once
they are in place. See
fig. 2C, and 2D.
Fig. 2E
For configurations
requiring 6W.
•Join a 3W+3W menu
board mount by using
Joiner Bars removed
from Joiner Rail
Assemblies provided
(Part JRS). See fig.2A.
•Place Joiner Bars as
shown in fig. 2F.
•Tighten screws using
4mm hex wrench once
they are in place. See
fig. 2C, and 2D.
Fig. 2F
Digital Menu Board 4249 Wall Mount Installation Manual Page 8
Rev. 04/19
Step 2B – Joining 2W & 3W Mounts to make a 4W or > (46”+)
Mount Type
Instructions Diagrams
For configurations
requiring 4 wide or 6
wide menu boards.
•Join a 2W+2W menu
board mount using the
four (4) Joiner Rail
Assemblies provided
(Part JRS). See fig.2A,
and 2B.
•Tighten screws using
4mm hex wrench once
they are in place. See
fig. 2C and 2D.
Fig. 2A
Fig. 2B
Fig. 2C Fig. 2D
For configurations
requiring 5 wide menu
boards.
•Join a 2W+3W menu
board mount using the
four (4) Joiner Rail
Assemblies provided
(Part JRS). See fig.2A,
2E.
•Tighten screws using
4mm hex wrench once
they are in place. See
fig. 2C, and 2D.
Fig. 2E
For configurations
requiring 6 wide menu
boards.
•Join a 3W+3W menu
board mount using the
four (4) Joiner Rail
Assemblies provided
(Part JRS). See fig.2A,
and 2F.
•Tighten screws using
4mm hex wrench once
they are in place. See
fig. 2C, and 2D.
Fig. 2F
Digital Menu Board 4249 Wall Mount Installation Manual Page 9
Rev. 04/19
Step 3 –Fastening Temporary Wall Brackets to Wall
Instructions
Diagrams
a) Determine center point for menu board
on wall. See figure 3A.
1. Mark wall with centre point
2. Mark wall with outside
measurements for menu board.
3. Determine location of wall studs.
Note: Minimum of three (3) studs must
be used to fasten mount to safely
support weight of mount and screens
for wood or steel studded walls.
Fig 3A
•At either end of the mount placement
mark the outer most studs with the
desired reference height for mount.
•Using a laser level or other level mark
the desired height on each stud behind.
See figure 3C and 3D.
•These marks at each stud location will
be used to drill holes for mounting the
Wall Brackets (Part WB).
•Screws for woods studs included, for
other types of studs appropriate
fasteners required (not included)
Fig. 3C
Fig. 3D
IMPORTANT
All of these Wall Brackets MUST be exactly
at the same height!
•Attach Wall Brackets to at least 3 studs
for each 2 Wide mount and at least 4
studs for 3 Wide mounts. See figure 3E.
•Hardware for mounting to wood
supplied.
Fig. 3E
Digital Menu Board 4249 Wall Mount Installation Manual Page 10
Rev. 04/19
Step 4 – Mounting to Wall
Instructions
Diagrams
•
Lift mount and place so top wall rails
are seated as shown in figure 4A.
•This will allow mount to stay on wall
temporarily to allow for easy marking
and pre drilling into wall for fastening
screws.
•Using a level adjust wall brackets as
necessary to level mount
•There are predrilled holes in the top
and bottom wall rails (fig. 4B) every
eight (8) inches to position at stud
locations. Fastening hardware for wood
studs only included. See figure 4B and
4C.
Important:
Ensure the proper type of fastening
hardware is used to ensure maximum
handling load can be supported.
Fig. 4A
Fig. 4B
Fig. 4C
Fig. 4D
•Remove cable ties once mount is
properly fastened to wall structure.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Micron Rack e supporto
