MicroNet SP616R Manuale utente

Quick Installation Guide

EtherFast 10/100Mbps Switch

Model No.: SP616R

Website http://www.micronet.info

Introduction

Micronet SP616R provides powerful, high-performance Ethernet

switch, with all ports capable of 10 and 100Mbps auto-negotiation

operation.

Store-and-forward switching mode promises the low latency plus

eliminates all the network errors, including runt and CRC error

packets. To work under full-duplex mode, transmission and

reception of the frames can occur simultaneously without causing

collisions as well as double the network bandwidth.

The switch is plug-n-play without any software to configure and also

fully compliant with all kinds of network protocols. Moreover, the

diagnostic LEDs on the front-panel can provide the operating status

of individual port and whole system.

Package Contents

Before you start installing the device, verify the following items are in

the package:

yOne SP616R Ethernet Switch

yQuick Installation Guide

yOne power cord

yRack-Mount accessories

Features

yComplies with 10Base-T/100Base-TX specifications of the

IEEE802.3/802.3u standard

ySupport Auto-Negotiation function to automatically select

optimal speed (10/100Mbps) and mode (Full/Half Duplex)

y8K MAC address table

y4 Mbyte memory buffer

ySupport auto uplink, no more cross-over cable

yForward and filter packets at non-blocking, full wire speed

y19-inch standard rack-mountable design

y100 - 240V AC, universal internal power supply

Physical Description

SP616R front view

SP616R rear view

Please refer to the following table for LED definition

LED Status Operation

Steady Green Power is on

Power Off Power is off

Steady Green A valid link is established

Off No link is established

LINK/ACT

Blinking Green Transmitting or receiving data

Installation

Micronet SP616R Switches do not require software configuration.

Users can immediately use any of the features of this product simply

by attaching the cables and turning on the power.

Rack Mounting

The switch can be mounted in an EIA standard 19-inch rack, which

can be placed in a wiring closet with other equipment. Attach the

mounting brackets at the switch’s front panel (one on each side),

and secure them with the provided screws.

Then, use screws provided with the equipment rack to mount each

switch in the rack.

Station Connections

Connect each station to the switch by twisted-pair cable. Plug one

RJ-45 connector into a RJ-45 port of the switch, and plug the other

RJ-45 connector into the station’s network adapter. Power on the

switch and then system is ready.

It supports Auto-Negotiation function to automatically select optimal

speed (10/100Mbps) and mode (Full/Half Duplex). If the attached

device does not support auto-negotiation or has auto-negotiation

disabled, an auto-sensing process is initiated to select the speed

and set the duplex mode to half-duplex.

Switch-to-switch Connections

In making a switch interconnection, you could use any port to

connect another switch with straight or crossover cable. As all the

ports support auto-uplink (MDI / MDI-X) function, using a

straight cable to make a switch-to-switch connection is

allowed.

Cable Selection

Refer to the following table：

Network Speed Cable Type Max. Length

10Mbps Cat. 3, 4, 5 UTP/STP 100 meters

100Mbps Cat. 5 UTP/STP 100 meters

Note: To prevent costly equipment damage and downtime, please

consider installing a surge suppression device or a UPS

(Un-interrupted Power Supply).

Network Application

Specifications

Standard IEEE802.3, IEEE802.3u

IEEE802.3x : Flow Control

Interface 16 * RJ-45 ports (10/100Mbps)

Cable Connections 10BASE-T: Category 3, 4, 5 UTP/STP

100BASE-TX: Category 5 UTP/STP

Network Speed 20M(Full duplex)/10M(Half duplex)

200M(Full duplex)/100M(Half duplex)

Features Auto-negotiation, Auto Uplink

Switch Fabric 3.2Gbps

Memory 4 MByte

MAC Address Table 8K entries

Forwarding Method Store and Forward

Filtering/Forwarding

Rate 10Mbps: 14,880pps/14,880pps

100Mbps: 148,800pps/148,800pps

Emission FCC Class A, CE

Operating Temperature 0o ~ 55o C (32o ~ 131o F)

Operating Humidity 10% - 95% (Non-condensing)

Dimension & Weight 441 x 130 x 44 mm, 1.34kg

Power Supply 100 - 240V AC, 50/60 Hz

Full range internal power supply

FCC Certifications

This Equipment has been tested and found to comply

with the limits for a Class A digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause

harmful interference in which case the user will be required to

correct the interference at his own expense.

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) this device may not cause

harmful interference, and (2) this device must accept any

interference received; including interference that may cause

undesired operation.

CE Mark Warning

This equipment complies with the requirements

relating to electromagnetic compatibility, EN 55022

class A for ITE, the essential protection requirement of Council

Directive 89/336/EEC on the approximation of the laws of the

Member States relating to electromagnetic compatibility.

Company has an on-going policy of upgrading its products and it

may be possible that information in this document is not up-to-date.

Please check with your local distributors for the latest information.

No part of this document can be copied or reproduced in any form

without written consent from the company.

Trademarks:

All trade names and trademarks are the properties of their

respective companies.

P/N: 2300-0233

Indice

Altri manuali MicroNet Interruttore

MicroNet

MicroNet SP508C Manuale utente

MicroNet

MicroNet SP607FA Manuale utente

MicroNet

MicroNet SP659B Manuale utente

MicroNet

MicroNet SP1684B Manuale utente

MicroNet

MicroNet SP212E Manuale utente

MicroNet

MicroNet SP6524PWS Manuale utente

MicroNet

MicroNet SP684C Manuale utente

MicroNet

MicroNet SP6108I Manuale utente

MicroNet

MicroNet SP6005P4 Manuale utente

MicroNet

MicroNet SP676C Manuale utente

MicroNet

MicroNet SP648B Manuale utente

MicroNet

MicroNet SP659A Manuale utente

MicroNet

MicroNet SP6008PWS Manuale utente

MicroNet

MicroNet SP616DB Manuale utente

MicroNet

MicroNet SP6528 Manuale utente

MicroNet

MicroNet SP218D Manuale utente

MicroNet

MicroNet SP698A Manuale utente

MicroNet

MicroNet SP6008P Manuale utente

MicroNet

MicroNet SP1678A Manuale utente

MicroNet

MicroNet SP659C Manuale utente

MicroNet

MicroNet SP3524A Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

MicroNet

MicroNet SP212E Manuale utente

MicroNet

MicroNet SP6824P Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Manuale utente