Microtek ArtixScan DI 6260S Manuale di istruzioni

Install Software

Unpack your scanner package and check for

major components.

I49-004856 D, September 2013

Start Here

nstalling your Microtek ArtixScan DI 6260S/6250S/6240S &

ArtixScan TS 630S

1. Scanner

2. Hi-Speed USB cable

3. Software CDs/DVDs

4. Power cord

5. Power adapter

Important: You must install software before connecting

your scanner. Always close any open programs, and

turn off Anti-virus utilities before installing software.

PC:

A. Place the Microtek Software CD/DVD

into a drive, and follow the on-screen

instructions to install the scanner

driver and software.

B. Restart your computer at the end of all

software installation.

NOTE: If the Microtek Software Installer screen

does not come up automatically, double-click the

following in succession: “My Computer”; the CD/

DVD-ROM icon; then cdsetup.exe to start the

installer program.

MAC:

A. Place the Microtek Software CD/DVD

(ScanPotter) into a drive, and double-click

the ScanPotter installer icon to install

ScanPotter.

B. Install the remaining software

components, then restart your computer

at the end of all software installation.

NOTE: After rebooting your Macintosh, the Microtek

software will attempt to locate your scanner on the

system. Since this is your first install and you have

not yet connected the scanner, simply ignore the

message that appears and proceed to the next step.

Unpack Contents

Open Feed Tray

A. Lift up the Document Feed Tray to the

highest level which can be opened.

B. Along the tracks of the two sides of the

Document Feed Tray, slide the feed tray

down until the supporters of the tray

touch the bottom edge of the tracks.

C. Tilt the Document Feed Tray backwards

in the direction as the arrow shown to

fully open the tray.

D. Along the tracks of the two sides of the

Document Feed Tray, slide the feed tray

down until it locks in place.

Open Feed Tray & OutputTray

Open Output Tray and

Paper Stabilizer

Bring down the a) Document Output

Tray and b) Paper Stabilizer from the

top towards the direction as shown in

the graph.

Document

Feed Tray

Before After

Document Output Tray

Slide the feed tray down

Paper Stabilizer

Connect Scanner

To the power adapter

A. Connect the power adapter to the back of the scanner.

B. Plug one end of the power cord into the power adapter, and plug the other end of the

power cord into a wall outlet or other power source.

To the Hi-Speed USB cable

C. Connect one end of the cable to your computer.

D. Connect the other end of the cable to the scanner’s USB port.

E. Press and hold the Power button ( ) until the orange LED lights on. Once the scanner is

powered on, the green LED will be lighted up, and the 7-segment LED display (SSD) will also

be activated as well.

Customize the Function Button

Your scanner is equipped with one Select, one Scan/Stop and one Favorite buttons, plus a LED

display, used to automate a number of customized and predefined operations, such as scanning

to a file, sending an image to your printer, scanning for OCR, etc. Customizing is done through

the Save Settings to Function Button command in the ScanWizard DI, refer to the scanner’s

User’s Manual for more details.

•Select: Toggle through the numbers of predefined

function buttons (F1 to F5).

•Scan/Stop: Start scan immediately or cancel a

ongoing scan job.

•Favorite: Carry out the function defined to the

Favorite button directly.

LED display:

Display the selected function

button number.

Power button

The system will

detect the

scanner

automatically.

Position Documents

The scanner supports scanning of document in various materials, such as A4 printouts,

insurance papers, legal documents, postcards, credit cards, business cards, and etc. A stack of

up to 100 sheets of papers (17 to 18 lbs/63.75 to 67.5 g/m² ) or 2 pieces of cards (1.3 mm/

0.05”) can be fed in the scanner’s Document Feed Tray at one time. Paper sizes can range

from 2.75” x 3.149” (70 mm x 80 mm) to 8.85” x 118” (225 mm x 3000 mm) or to 8.85” x

25” (225 mm x 635 mm) depending on the scanner you purchased.

To load a stack of documents

1. Before loading the stack of papers onto

the scanner’s Document Feed Tray,

please fan the papers and then align the

top edges of the papers neatly.

2. Load the stack of papers onto the

scanner’s Document Feed Tray, with the

side to be scanned facing down and the

top edge facing toward the feeder.

Push the stack of papers into the tray

until the paper’s edge touches the bottom

edge of the feeder.

WARNING: The document feeder is not designed

for scanning photos; doing so may damage your

originals. Microtek accepts no responsibility for

damage that may arise from misuse of

equipment.

3. Align the stack of originals with the

center of the Document Feed Tray by

sliding the two Guide Arms toward the

stacked papers if needed.

4. Pull out the Output Tray Extender to carry

the longer paper if needed.

5. Lift up either of two Paper Stoppers to

keep a stack of output papers stay neatly

and tightly inside the Document Output

Tray if needed.

Guide Arms

Output Tray

Extender

Paper Stopper (1) Paper Stopper (2)

Document Feed Tray

NOTE: For more details on

how to adjust the Output Tray

Extender and Paper Stoppers,

Please refer to the section

“Output Tray Notice” in the

guide.

OutputTray Notice

The Paper Stopper is designed to prevent the paper stacks falling in a mess after they were

scanned and output into the output tray. Before scanning a stack of papers, please follow the

steps below to fix the Paper Stopper into the right position in the tray, in order to keep output

papers stay neatly in the tary after the scan.

1. Pull out the Output Tray Extender.

2. Lift up either the Paper Stopper 1

or 2, depending on the length of

the paper.

3. Take out one piece of paper from

the stacks and put it in the output

tray, laying it completely flat and

bringing the top or bottom edge of

it into contact with the bottom of

the scanner.

4. Push back the Output Tray

Extender until the Paper Stopper

touches the edge of the paper.

Finally, load the papers to be

scanned into the feed tray to start

your scanning.

NOTE: The settling position for the

Paper Stopper on the tray must be

equivalent to the length of the paper.

Incorrect positioning of the Paper

Stopper will result in disorders and

mess for the after-scanned outputs. Be sure the stopper

is lightly against the

edge of the paper.

Load the paper inside

the space between

the stopper and the

output slot of the

scanner.

Align the

paper against

the side of

output slot

located at

the bottom

of the

scanner.

NOTE: When the card is loaded, launch ScanWizard DI. Then,

click the Custom Scan button and select “Card” to start your

card scanning.

To Load Cards

1. Slide the Guide Arms toward the center of the feed tray

and free up the enough space to put the card inside.

2. Load and center the card onto the scanner’s Document

Feed Tray, with the front side facing up and the top

edge directing toward the feeder.

Basic Scanning for PC Users

1. Load the stack of documents to be scanned onto the ADF’s Document Feed Tray.

WARNING: Do not place photo paper or fragile sheets of paper on the feed tray, as doing this will

damage the original photo or frail papers during the feeding process.

2. Launch ScanWizard DI — either as a stand-alone by clicking the program icon, or by using

the File-Import or Scan command from an application program.

3. Specify your scanning requirements in the ScanWizard DI control panel.

a) Select ADF (Odd Pages),ADF (Even Pages) or ADF (Duplex) in the Scan Source drop-

down menu as your image input device.

b) Select the appropriate image type (e.g., Black & White) in the Scan Type drop-down

menu as your image output type.

– Select RGB Color (24 bits) to scan the image in color.

– Select Grayscale (8 bits) to scan the image in grayscale.

– Select Black & White (1 bit) to scan the image in black-and-white.

– Select Auto Color Detection to scan the image.

c) Select a dimension in the Paper Size drop-down menu as your preview image size.

d) Select a desired resolution in the Resolution drop-down menu for your image output

resolution.

e) If “Auto-crop & Auto-deskew” is selected, the scanner automatically detects the size

of the original image, crops the full scan frame to fit the image, and removes unwanted

black borders after the scan, as well as corrects the distorted image for proper

alignment.

f) If necessary, select a level of paper thickness for the ultrasonic double-feed detection

in the Double Feed drop-down menu.

g) If “Auto-crop & Auto-deskew” is selected, the scanner automatically detects the size

of the original image, crops the full scan frame to fit the image, and removes unwanted

black borders after the scan, as well as corrects the distorted image for proper

alignment.

4. Select the image type (e.g., Text) in the Attribute drop-down menu as your image type.

– Select Line Art to scan line art images (images in one color or in black-and-white, such

as logos or mechanical blueprints).

– Select Photo to scan color prints.

– Select Text to scan text.

5. If necessary, adjust image quality by using the image correction tools.

6. Click the Scan button, or click the Custom Scan button and select “Save to File” to start

multiple-sheet, automatic scanning.

• If ScanWizard DI is launched from an image-editing program, the scanned image is

delivered after the scan to your application, where the image can be saved, printed, or

modified further.

• If ScanWizard DI is launched as a stand-alone program, the scanned image can be

saved after the scan to a file or opened in an image-editing program.

Alternatively, click the Quick Scan button to scan your documents directly to a PDF.

NOTE: For more details on other scanning scenarios applicable to your scanner, refer to the scanner’s User’s

Manual in the Microtek Software CD/DVD.

Image

correction

settings

Image type

Scanning

settings

Scan frame

(enclosed by

dotted lines and

labeled with the

tag “Main”)

Preview window

Preview image (the

enclosed frame

bordered in red)

Toolbar

It appears only when ScanWizard DI is

launched as stand-alone program,

allowing you to scan documents to a

PDF file directly.

For preview

purposes only

Basic Scanning for Mac Users

1. Raise the scanner lid, and place the document (e.g. photo, check, etc.) to be scanned face

down on the scanner glass surface. Position the top end of the document towards the back

of the scanner.

2. Launch ScanPotter as a stand-alone by clicking on the program icon, or by selecting it from

the application folder in your Mac OS X system.

3. In the Scan Source options menu, choose ADF-Simplex or ADF-Duplex for as your input

image device.

4. Specify your scanning requirements in the Scanner Settings column.

a) Select the appropriate image type (e.g., RGB Color) in the Color Type as your image

output type.

- Select RGB Color to scan the RGB image in color.

- Select CMYK Color to scan the CMYK image in color.

- Select Grayscale to scan the image in grayscale.

- Select Black & White to scan the image in black-and-white.

b) Select a desired resolution in the Resolution for your image output resolution.

c) Select Automatic Detection or a desired dimension in the Scan Frame as your preview

image size.

5. If necessary, click the Preview button to perform a preliminary scan of the image in the

Preview window. Then, reload the document into the feed tray.

6. If necessary, resize the scan frame (floating dotted rectangle) around the image by

dragging on the square spots on the edge or on the corner of the scan frame to determine

the final size of the actual scan.

7. If necessary, specify file settings for your output image files, using the options offered in

the File Saving Settings column.

8. If necessary, click the Image Settings button to switch to a window in which you can

select an image effect to the image directly or adjust image quality manually by using the

additional image correction tools.

9. Click the Scan button to start scanning.

NOTE: For more details on using ScanPotter, refer to the ScanPotter Reference Manual in the Microtek

Software CD/DVD.

Click the Image

Settings button to

switch to a window

where contains a

composite display

of image-effects

(Filter column) and

additional image

correction tools

(Additional

Adjustment column)

for your scanned

image.

Click the Scan Settings button

to switch back to the default

control panel of ScanPotter

Preview window Scan frame

(enclosed by dotted lines)

Fixing Paper Jams

1. Lift up the Release button in the direction

of arrow shown to open the scanner

cover.

2. Remove the jammed paper by taking out it

in an upward direction.

3. Close the scanner cover. You should hear

a click sound when the scanner cover

returns to its original position.

NOTE: Do not take out a jammed paper by force

from the scanner when the scanner cover closes. If

doing so, it may damage the rollers and cause the

scanner work improperly.

Release button

Scanner cover

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Microtek Scanner

Microtek

Microtek ScanMaker i2400 Manuale del proprietario

Microtek

Microtek ArtixScan 1800f Manuale

Microtek

Microtek LS-3800 Manuale utente

Microtek

Microtek Bio-5050 Manuale di istruzioni

Microtek

Microtek ScanMaker V6UPL Manuale utente

Microtek

Microtek ArtixScan DI 5230 Manuale di istruzioni

Microtek

Microtek ScanMaker X12USL Manuale utente

Microtek

Microtek ScanMaker i800 Manuale utente

Microtek

Microtek ArtixScanDI 4020 Plus Manuale utente

Microtek

Microtek ScanMaker 1000XL Plus Manuale utente

Microtek

Microtek Artix Scan1100 Manuale di installazione

Microtek

Microtek ScanMaker 4600 Manuale utente

Microtek

Microtek ArtixScanDI 4020 Plus Manuale di istruzioni

Microtek

Microtek ArtixScan 120tf Manuale utente

Microtek

Microtek ArtixScan DI 2020 Manuale utente

Microtek

Microtek ScanMaker 3750i Manuale utente

Microtek

Microtek ScanMaker i900 Manuale

Microtek

Microtek ScanMaker 3700 Manuale utente

Microtek

Microtek ScanMaker 1000XL Manuale utente

Microtek

Microtek ScanMaker 1000XL Plus Manuale di istruzioni

Microtek

Microtek ArtixScanDI 8040c Manuale utente

Microtek

Microtek LS-3700 Manuale utente

Microtek

Microtek ScanMaker i800 Manuale utente

Microtek

Microtek ScanMaker 4 Manuale utente

Manuali Scanner popolari di altre marche

Plustek

Plustek Scanner Manuale utente

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manuale utente

Renkforce

Renkforce DS100-5M Manuale utente

Image Access

Image Access WideTEK A2 Manuale utente

Canon

Canon imageFORMULA CR-120N Manuale utente

Fujitsu

Fujitsu FI-4860C2 Manuale utente

GeoSlam

GeoSlam ZEB Horizon Istruzioni per l'installazione

Kodak

Kodak i5800 Scanner Manuale utente

Kodak

Kodak i7300 Manuale utente

Revopoint

Revopoint POP Manuale utente

Fujitsu

Fujitsu fi-4860C Manuale utente

Eddyfi Technologies

Eddyfi Technologies Floormap X Manuale utente

Faselase

Faselase F6 Manuale utente

Fujitsu

Fujitsu CardMinder Manuale utente

Uniden

Uniden BC340CRS Manuale utente

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manuale utente

Mustek

Mustek PageExpress 4800 Pro Manuale utente

Optex

Optex 750830 Manuale utente