Midland 77321 Manuale

Indice

Altri manuali Midland Radio

Midland

Midland ML801 Manuale utente

Midland

Midland PRO902 Manuale utente

Midland

Midland 77-120ESP Manuale utente

Midland

Midland BIZTALK MB400 Manuale di installazione

Midland

Midland 71-506-10D Manuale utente

Midland

Midland 220 Manuale utente

Midland

Midland X-tra Talk LXT118 Series Manuale utente

Midland

Midland Titan Series Manuale utente

Midland

Midland 5001z Manuale utente

Midland

Midland ER310 Manuale utente

Midland

Midland MXT575 Manuale utente

Midland

Midland 75-509 Manuale utente

Midland

Midland GXT200 Manuale utente

Midland

Midland 220 Manuale utente

Midland

Midland DBR2500 Manuale utente

Midland

Midland D-200 Manuale utente

Midland

Midland 75-785 Manuale utente

Midland

Midland CT 510 Manuale utente

Midland

Midland 13-898B Manuale utente

Midland

Midland 248 Manuale utente

Midland

Midland TITAN Manuale utente

Midland

Midland 1001z Manuale utente

Midland

Midland BIZTALK BR200 Manuale di installazione

Midland

Midland G7XT Manuale

Manuali Radio popolari di altre marche

EisSound

EisSound KBSound iSelect Manuale utente

Konig

Konig HAV-SR41 Manuale utente

Roberts

Roberts exprssion Manuale utente

VDigi

VDigi DD3.0 Manuale utente

Radio Shack

Radio Shack 21-1863 Manuale utente

Roberts

Roberts Stream 207 Manuale utente

Sony

Sony Walkman SRF-M97 Manuale utente

Stanley

Stanley FatMax FMC770 Manuale utente

auna

auna DAB-Radio 10026947 Manuale utente

SOUNDMASTER

SOUNDMASTER UR190 Manuale utente

HYT

HYT TC-320 Manuale utente

auna multimedia

auna multimedia Yellowstone 10026851 Manuale utente

B-Tech

B-Tech GMRS-V2 Manuale utente

Weierwei

Weierwei VEV-V8 Manuale utente

SOUNDMASTER

SOUNDMASTER DAB750 Manuale utente

Telefunken

Telefunken TF-1505 Manuale utente

Makita

Makita LXRM03 Manuale utente

PRESIDENT

PRESIDENT TEDDY R. Manuale utente

CB Module Tuning Procedure

1. RX TUNING

1.VCO

Adjust TC 20P variable capacitor till tolerance of 10MHz reference point is within ±

100Hz.(measure at TP8 by cymometer)

Adjust T12 coil, let VCO output is 1.9V ±0.2V at 40CH.(Measure point is at TP3 by

mechanical Voltage meter)

2. TX.

Press TEST BOX AM/FM button to switch between AM and FM

2.1 AM/FM: Press PTT, adjust TC (Frequency Tolerance TUNING), so that the

output frequency is similar to desire channel such as 27.405MHZ for channel 40.

2.2 AM: adjust VR2 (AM MODULATION TUNING) to let AM MOD at 80%~85%

and MAX is not over 100%.

2.3 AM/FM: tune T6 T7 T8 and VR200(TX POWER /TX DIST TUNING) to adjust

the TX POWER and find out the distortion is minimum point. (AM AT 80% MOD,

DIST is less than 10%; FM DIST is less than 8%). After that we have to tune the TX

Power within 3.6W to 4W by adjusting VR200.

2.4 FM: Adjusting VR4 (Frequency Deviation) to let FM frequency shift between

1.7K~1.9K and Maximum is not over 2K.

3. RX TUNING

. Press TEST BOXAM/FM button to switch between AM and FM.

3.1 AM/FM:Adjust L1~L3, T1, T2 to make the best sensitivity and S/N. It should be at

12dB SINAD and the S/N is at least –109dB..

DC 12.7V

Test Box

SAMPLE

RF Communications

Spectrum Analyzer

3.2 FM : AdjustT3(SENSITIVITYAND S/N) to let the SINAD be the best..

3.3 AM/FM : Adjust VR1(AUDIO OUTPUT) to let the audio output for FM

0.1~0.32V and AM 0.12~0.16V

3.4 Adjust VR20(SQ), when INPUT is 62dBuV and OUTPUT would be 3.8V.

Testing Point is at TP1.

2.WX Tuning

Description: WX is just a 1050Hz signal warning system.

A. Frequency reference point is as TP5. It should be 10.25MHz ±60Hz.

B. The voltage at TP6 should be 1.5 to 1.75V. If not, tune L6 till get the desired value

C. Set the testing point at the output of TP4, tune T4 till getting maximum sensitivity

and minimum distortion.

D. Set the testing point at TP10 for 1050Hz signal testing. Usually, voltage at TP10

should be high (4.9V). Upon receipt 1050Hz signal, the voltage should be low (0V).

The above testing is following ETS300-135 standard for FM, EIA/TIA-382-A for AM

including ( FCC/CE and client requirement)

PREPARED BY : Mr. YK Liu APPROVED BY :

Date: 6-Apr-05