MilDef Crete DS13 Manuale utente

TABLET COMPUTER

DS13

USER’S GUIDE

○

Revision History

Revision Date Changes Author

1.0.1

2021/04/09

Update CE/ FCC info

Add Battery Characteristics info and correct note

Add Battery operating temperature info

Add Docklite DLDS info

Add E-RMA Service instructions

Patricia Huang

Notice

No part of this publication may be reproduced and modified without the written permission

of MilDef Crete Inc.

MilDef Crete Inc. reserves the right to make changes in the products or the product

specifications without any prior notice. Customers are advised to contact MilDef Crete Inc.

for updated product information.

MilDef Crete Inc. makes no representations or warranties, either expressed or implied, with

respect to the contents hereof and specifically disclaims any warranties for the correctness

of this book, nor any license grant of MilDef Crete Inc.'s patents or intellectual properties.

MilDef Crete Inc. assumes no liability for customer's loss or damage caused by using this

document.

Trademarks

Trademark Acknowledgments

Intel® is a registered trademark of Intel Corp.

All product and company names are trademarks or registered trademarks of their respective

holders.

III

Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with minimum distance 20cm

between the radiator & your body.

RF exposure warming

This equipment must be installed and operated in accordance with provided instructions and

antenna(s) used for this transmitter must be installed to provide a separation distance of at

least 20 cm from persons and must not be co-located or operating in conjunction with any

other antenna or transmitter. End-users and installers must be provided with antenna

installation instructions and transmitter operating conditions for satisfying RF exposure

compliance.

Regulatory Information/Disclaimers

Installation and use of this computer must be in strict accordance with the instructions

included in the user documentation provided with the product. Any changes or modifications

(including the antennas) made to this device that are not expressly approved by the

manufacturer may void the user’s authority to operate the equipment.

The manufacturer is not responsible for any radio or television interference caused by

unauthorized modification of this device, or the substitution of the connecting cables and

equipment other than manufacturer specified. It is the responsibility of the user to correct

any interference caused by such unauthorized modification, substitution or attachment.

Manufacturer and its authorized resellers or distributors will assume no liability for any

damage or violation of government regulations arising from failing to comply with these

guidelines.

Federal Communications Commission regulatory compliance

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

FCC 47 CFR Part 15 Subpart B

FCC 47 CFR Part 15 Subpart C

FCC 47 CFR Part 15 Subpart E

Note:

This equipment has been tested and found to comply with the limits for a class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

⚫ Reorient or relocate the receiving antenna.

⚫ Increase the separation between the equipment and receiver.

⚫ Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

⚫ Consult the dealer or an experienced radio/TV technician for help.

Important:

Changes or modifications to this product not authorized by MilDef could void the

electromagnetic compatibility (EMC) and wireless compliance and negate your authority to

operate the product.

In order to maintain compliance with FCC regulations, compliant peripheral devices and

shielded cables must be used with this equipment.

EU Declaration of Conformity

The device is hereby confirmed to comply with the requirements set out in the Council

Directive on the Approximation of theLaws of the Member Statesrelating to Electromagnetic

Compatibility Directive (2014/30/EU), Radio Equipment Directive (2014/53/EU) and Low

Voltage Directive (2014/35/EU), if used for its intended use and that the following standards

have been applied:

1. Safety

Applied Standard(s):

EN 62368-1: 2014/A11:2017

2. Health

Applied Standard(s):

EN 50566:2017

EN 62209-2:2010

3. Radio Frequency Spectrum Usage

Applied Standard(s):

EN 300 328 V2.1.1 : 2016-11

EN 301 893 V2.1.1 : 2017-05

EN 303 413 V1.1.1 : 2017-06

4. Electromagnetic Compatibility Directive

Applied Standard(s):

EN 55032 Class B (2015)

EN 61000-3-2 (2018)

EN 61000-3-3 (2013/A1: 2017)

EN 55024 (2010/A1: 2015)

EN 61000-4-2 (2009)

EN 61000-4-3 (2006+A2: 2010)

EN 61000-4-4 (2012)

EN 61000-4-5 (2014+A1: 2017)

EN 61000-4-6 (2014)

EN 61000-4-8 (2010)

EN 61000-4-11 (2004/A1: 2017)

EN 301 489-1 V2.2.0 (2017)

EN 301 489-17 V3.2.0 (2017)

EN 301 489-19 V2.1.0 (2017)

Power Conservation

This computer consumes less power compared to conventional consumer computers. The

power consumption may be further reduced by properly configuring the Power Management

Setup.

It is recommended that the power saving features be enabled even when not running on

battery power. Power Management features can conserve power without degrading system

performance.

Power Safety

There are specific power requirements for your computer:

⚫Only use an approved AC adapter designed for this computer.

⚫There is a 3-prong grounded plug for the AC adapter. The 3rd prong is an important

mechanism for ensuring product safety. Please do not neglect the importance of this

mechanism. If you are unable to access a compatible outlet, please hire a qualified

electrician to install a compatible outlet for you.

⚫When unplugging the AC power cord, please make sure to disconnect the cord by

pulling from the plug head instead of pulling from the wire to prevent wire damage.

⚫Make sure the power outlet and any other extension cord(s) you use can support the

total current load of all the connected devices.

⚫Before cleaning the computer, please make sure it is disconnected from any external

power source.

Warning

Before any upgrade procedures, make sure the power is turned off, and all the

cables are disconnected. Also, it is advisable to remove your battery to prevent

your computer from accidentally turning on.

VII

Battery Precautions

⚫Only use batteries designed for this computer. Using incompatible battery types may

cause explosion, leakage or damage to the computer.

⚫Do not remove the battery from the computer while the computer is powered on.

⚫Do not continuously use a battery that has been dropped, or that appears damaged

(e.g. bent or twisted) in any way. Even if the computer is able to continuously work with

a damaged battery, the circuit damage may occur and possibly cause fire.

⚫Always use the charger designed for this computer to recharge the battery. Incorrect

recharging may cause the battery to explode.

⚫Do not try to repair a battery by yourself. For battery service or replacement, please

contact with your service representatives.

⚫Please dispose damaged battery promptly and carefully. Explosion or leakage may

occur, if the battery is improperly handled or discarded.

Notice:

For safety, charging will stop if the internal temperature of the battery is out of range(<0°C;

>50°C). Please note that charging could have stopped before the ambient temperature

reaching these boundaries because the internal temperature of the battery does not equal

to the ambient temperature.

Battery Disposal & Caution:

The product that you have purchased contains a rechargeable battery. The battery

is recyclable. At the end of its service life, under various state and local laws, it may

be illegal to dispose ofthis battery into the municipal waste stream. Check with your

local solid waste officials for details in your area for recycling options or proper

disposal. Danger of explosion may possibly occur, if the battery is incorrectly

replaced. Replace only with the same or the equivalent battery recommended by

the manufacturer. Discard the used battery according to the manufacturer’s

instructions.

VIII

Environmental Information, Material Safety & Recycling

All materials used in the manufacturing of this equipment are recyclable or environmentally

friendly. Please recycle the packing materials in accordance with local regulations at the end

of the product's service life.

Notice:

⚫The equipment may contain insignificant amount of hazardous substances for health

and environment below control level.

⚫To avoid spreading such substances into the eco system and to minimize the pressure

on the natural environment, you are encouraged to reuse or recycle most of the

materials in a safe way after the product’s service life.

⚫For more information on collection, reuse and recycle of materials, please consult local

or regional waste administrations for more information. You can also contact your dealer

for more information on the environmental details of the equipment.

⚫The symbol of the crossed out wheeled bin indicates that the product

(electrical and electronic equipment) should not be placed in municipal

waste. Please check local regulations for disposal of electronic products.

 
Maintenance and Service 
TABLE OF CONTENTS 
CHAPTER 1 - GETTING STARTED.............................................................. 1 
UNPACKING ..................................................................................................................1 
APPEARANCE OVERVIEW ...............................................................................................2 
CHAPTER2 - OPERATING INFORMATION................................................. 6
START USING YOUR TABLET COMPUTER.........................................................................6 
STOP USING YOUR TABLET COMPUTER ..........................................................................7 
WORKING WITH POWER BUTTON (HEATER KIT) ...............................................................8 
INSTALLING OPERATING SYSTEM....................................................................................9 
INDICATORS AND FUNCTION KEYS ...................................................................................9 
SYSTEM MANAGER......................................................................................................11 
USING MSATA SSD....................................................................................................14 
USING MICRO SD CARDS.............................................................................................15 
USING KENSINGTON LOCK SLOT...................................................................................15 
USING LIGHT SENSOR .................................................................................................16 
MOUNTING DOCKLITE DLDS........................................................................................17 
CHAPTER3- MANAGING POWER............................................................. 19
AC ADAPTER ..............................................................................................................19 
BATTERY ....................................................................................................................20 
BATTERY RECALIBRATION ............................................................................................24 
ACPI SUPPORT ..........................................................................................................25 
USB FAST CHARGING .................................................................................................26 
CHAPTER 4 - BIOS SETUP........................................................................ 27 
MAIN MENU ................................................................................................................27 
ADVANCED MENU........................................................................................................28 
CPU Configuration Sub-Menu............................................................................................30 
PCH-FW Configuration Sub-Menu......................................................................................30 
Platform Settings Sub-Menu..............................................................................................31 
Intel ® 82574L Gigabit Network Connection Sub-Menu....................................................31 
Trusted Computing Sub-Menu...........................................................................................32 
RF Device Control Configuration Sub-Menu ......................................................................32 
EC Thermal Control Sub-Menu...........................................................................................33 
AC In Boot Control Sub-Menu............................................................................................33 
USB Power Control Sub-Menu ...........................................................................................34 
Battery Recalibration Sub-Menu........................................................................................34 
IT8760 Super IO Configuration Sub-Menu.........................................................................35 
Intel ® Bios Guard Technology Sub-Menu..........................................................................35 
Network Stack Configuration Sub-Menu ...........................................................................36 
CSM Configuration Sub-Menu ...........................................................................................36 
CHIPSET MENU ...........................................................................................................37 
PCH-IO Configuration Sub-Menu .......................................................................................37 