Milesight SG50 Manuale utente

Ultra Low Power Solar Gateway

SG50

Quick Start Guide

Milesight IoT Co., Ltd. www.milesight.com

All software & files can be downloaded from

https://www.milesight.com/iot/resources/download-center/#documents

Content

1. Packing List……………………………………………………………..........................................

2. Hardware Introduction……………………………………………………...................…............

3. SIM Card Installation……………………………………………...........................................

4. Power Supply……………………......................................................……..................

5. Installation………………………...........................................................…................

6. Web GUI Access………………………………........................................................…...

7. FCC Statement………………………………........................................................….....

1311

www.milesight.com

1. Packing List 2. Hardware Introduction

12 21313

www.milesight.com www.milesight.com

Button Descriptions:

Function Action LED Indicator

Turn On/Off Wi-Fi

Reset to Factory

Default

Quick press the

button once.

Press and hold the button

for more than 5 seconds. SYS LED quickly blinks.

Wi-Fi off: W-Fi LED off

Wi-Fi on: Wi-Fi LED static on.

Cellular & GPS

Antenna

Battery Compartment

Grounding Stud

4 × Wall Mount Screw Kits 1 × Warranty Card1 × Quick Start Guide

1 × Battery Pack1 × SG50 Device 1 × SIM Card Ejector Tool

1 × Antenna U-bolt Kit 1 × Solar Panel

(With M12 Power Cable) 4 × Mounting Screws

1 × LoRaWAN®Antenna 1 × Antenna Coaxial Cable (1m) 1 × Antenna U-strap Kit

1 × Mounting Bracket Kit1 × Solar Panel Bracket Kit 2 × Hose Clamps

SIM Slot

Type-C

USB

Button Vent Plug

Wi-Fi AntennaLED Area DC Power Connector

LoRaWAN®

Antenna Connector

3. SIM Card Installation

4. Power Supply

1 4 15

www.milesight.com www.milesight.com

1. Take the SIM cover down, use an ejector tool to open the SIM card tray. Insert the nano

SIM card, then put the slot with the SIM card back into the device.

2. Rotate back the cover and tighten it with a wrench to prevent water from entering the

device.

SG50 can be powered by either a 12-24 VDC external supply or solar panel. I n the

meantime, the internal battery pack will also be charged. When the external supply

is disconnected or there is not enough power for the solar panel, SG50 can be powered

by the internal battery pack.

Battery Installation

1. Release the fixing screw on the side of the device, and remove the battery compartment

cover.

2. Push the battery into the battery compartment as the icon shows.

3. Fix the cover back to the device using the fixing screw.

Note：

After installing the battery, the device will not power on automatically. Please connect

the power cable of the solar panel to the device to turn it on. When the power cable is

disconnected, the device will power off.

The device can not be charged when its temperature is more than 50°C. Please avoid

direct exposure of the device to sunlight.

The battery should be removed from the device if it will not be used for an extended period.

Hold the latches on the battery pack to pull it out.

5. Installation

16 17

Bracket Pole Mounting

Solar Panel Installation

www.milesight.com www.milesight.com

Bracket Wall Mounting

Drill 4 holes on the wall according to the mounting bracket and insert the wall plugs into

these holes. Then fix the mounting bracket to the wall by fixing the wall mounting screws

into the wall plugs.

Straighten the hose clamps and slide them through the rectangular rings in the mounting

bracket. Wrap the hose clamps around the pole, then use a screwdriver to tighten the

locking mechanism by turning it clockwise.

1. Fix the solar panel to the solar panel bracket using 6 fixing screws.

18 19

Antenna U-strap Installation

Device Installation

www.milesight.com

2. Hang the solar panel bracket onto the mounting bracket and fix both parts using 2 fixing

screws first. Adjust the angle of the solar panel bracket (15°, 45°, and 75° is optional) based

on the installation environment. Then fix the remaining two screws to the solar panel bracket.

1. Pass the LoRaWAN®antenna through the U-strap clamp and fix the U-strap clamp to

the side of the mounting bracket using 2 flat washers and 2 screws.

1. Fix the device to the opposite side of the solar panel bracket using 4 screws. When

installation, it is suggested to fix the 2 screws on the top at first.

2. Install antennas as subsequent steps.

15°

45°

75°

3. Connect M12 power cable of solar panel to DC power connector of device, the device

will power on automatically.

110 111

www.milesight.com www.milesight.com

1. Pass the LoRaWAN®antenna through the antenna clamp and fix it using 4 screws,

then wrap the U-bolt around the pole and fix the clamp with nuts and other accessories.

SG50 provides a web-based configuration interface for management. If it is the first time

you configure the device, please use the default settings listed below:

Wi-Fi SSID: Gateway_XXXXXX

Wi-Fi IP Address: 192.168.23.1

Username: admin

Password: password

Configuration Steps:

1. Ensure the Wi-Fi LED is statically on.

2. Enable Wireless Network Connection on your computer and search for the SSID to

connect it.

3. Type 192.168.23.1 to the browser to log in the web GUI of device.

Antenna U-bolt Installation

6. Web GUI Access

2. Connect one end of the antenna coaxial cable to the LoRaWAN®antenna, the opposite

end to the device’s antenna connector.

2. Connect one end of the antenna coaxial cable to the LoRaWAN®antenna, and the

opposite end to the device's antenna connector.

112

www.milesight.com

7. FCC Statement

Any changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) This device may not cause harmful interference, and.

(2) This device must accept any interference received, including interference that may

cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated

with minimum distance 20cm between the radiator& your body. This transmitter must

not be co-located or operating in conjunction with any other antenna or transmitter.

Altri manuali per SG50

Indice

Altri manuali Milesight Portale

Milesight

Milesight UG67 Manuale utente

Milesight

Milesight UG63 Manuale utente

Milesight

Milesight Urbana GI03 Manuale utente

Milesight

Milesight LoRaWAN UG6 Series Manuale utente

Milesight

Milesight UG67 Manuale utente

Milesight

Milesight SG50 Manuale utente

Milesight

Milesight UR32L Manuale utente

Milesight

Milesight UG63 Manuale utente

Milesight

Milesight Urbana GO03 Manuale utente

Milesight

Milesight UG65 Manuale utente

Milesight

Milesight UG65 Manuale utente

Milesight

Milesight UG65 Manuale utente

Milesight

Milesight UG63-868M Manuale utente

Milesight

Milesight UG63 Manuale utente

Milesight

Milesight UG67 Manuale utente

Milesight

Milesight UG65DSS Manuale utente

Milesight

Milesight UG65 Manuale utente

Milesight

Milesight UG56 Manuale utente

Manuali Portale popolari di altre marche

LST

LST M500RFE-AS Manuale utente

Kinnex

Kinnex Media Gateway Manuale utente

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuale utente

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuale utente

Telsey

Telsey CPVA 500 - SIP Manuale utente

RTA

RTA 460A-NNA4 Scheda tecnica

Shaw

Shaw Gateway HDPVR Manuale utente

ABB

ABB VSN900 Guida rapida

Commander

Commander Pulse Manuale utente

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuale utente

NETGEAR

NETGEAR C6300BD Manuale utente

Amit

Amit CDW531AM Manuale utente

HMS

HMS Netbiter EasyConnect EC150 Manuale utente

Huawei

Huawei EchoLife HG620 Manuale utente

AT&T

AT&T U-verse 3801 Manuale per l'uso e la cura

Logic IO

Logic IO RTCU MX2 turbo Manuale utente

Suttle

Suttle MediaMAX MXM-521 Manuale utente