Millitronic Hive Manuale utente
Driver Installation & User Manual
Supervised By MILLITRONIC Co., LTD
August, 2019
Version: 3.0 7AD000000003(A)
Wireless USB3.0 transmitter
Wireless Dock receiver
Thank you for purchasing this
MILLITRONIC product.
You can visit our website:
www.millitronic.com.tw
Trademarks
™ MILLITRONIC CO., LTD
Logo are owned by MILLITRONIC CO.,
LTD Any non MILLTRONIC trademarks
are used for reference purposes only.
Introduction Overview..................................................................................... 01
Product Description ...................................................................................01
Specication ..............................................................................................03
The Working Area......................................................................................04
Chapter 1 – Installing The Dock ............................................... 05
Step 1 - Setting Up The Dock....................................................................05
Step 2 - Execution The Installer ................................................................06
Step 3 - License Agreement And Choose Components............................ 08
Step 4 - Choosing Install Location And Start To Install.............................. 09
Step 5 - Installation Complete ...................................................................10
Chapter 2 – User Manual ....................................................... 10
Using The “MilliDock” App .........................................................................10
Waiting for The First Time Auto Initializing ................................................ 11
The Status of The MilliDock App ............................................................... 11
Connection Success..................................................................................13
Stop And Exit.............................................................................................14
Settings .....................................................................................................14
Uninstalling MilliDock App ......................................................................... 15
Federal Communication Commission Interference Statement ............ 16
Federal Communication Commission Interference Statement ............ 17
Appendix 1: Wireless USB3.0 Transmitter Light Signals....... 19
In USB 3.0 Port .........................................................................................19
In USB 2.0 Port .........................................................................................19
Appendix 2: Safety Information................................................ 20
Appendix 3: Troubleshooting ................................................... 20
Contents
01Overview
The Millitronic HIVE WiGig Docking station lets you
wirelessly connect your Windows 10 laptop to a big-
screen display.
Enjoy a brand-new, latency-free user experience
that is free of annoying cables with 60GHz Wireless
Gigabit technology. Connect any monitor via the
HDMI /VGA port on the Millitronic HIVE WiGig
Docking station, then wirelessly connect your
Windows 10 laptop via WiGig. The pleasures of
near-zero latency (under 30ms) will signicantly
enhance your productivity.
UNIVERSAL DOCKING STATION: The Millitronic
Hive WiGig Docking station is compatible with all PC
laptops (Windows 10 64bit) that are equipped with
USB3.0 ports.
CONNECT DISPLAY: Hook up the projector/monitor
to the docking station using the VGA and HDMI
ports.
MORE PORTS: Connect a variety of peripherals to
Millitronic HIVE Docking station with one USB3.0 port,
one HDMI and one VGA port, and a Gigabit Ethernet port.
Overview
Product Description
This Package Includes The Following:
- Wireless USB3.0 transmitter: 1 unit.
- Wireless Dock receiver: 1 unit.
- Power Adapter (output DC 12 V): 1 unit
- User manual
- Warranty card: 1 year
In Following Demonstration, The Following Is Required:
- One laptop
- One displayer with HDMI / VGA connector
- One HDMI / VGA cord
Features:
- HDMI/VGA Output.
- Size: 183mm X 122mm.
- Low latency display.
02 Overview
Specication
Wireless Dock Receiver
Wireless
60GHz Radio
Adaptive 180 Degree Beamforming
Connection Interface
Compliant with USB 3.0 / 2.0
Compliant with HDMI/VGA (Single output)
Ethernet
Dimension
Size: 185 x 120.7 x 40.3 mm
Weight: 246 g
Certication
FCC approved for indoor use
Power
DC 12V-1A in
03Overview
Specication
Wireless USB3.0 Transmitter
Wireless
60GHz Radio
Adaptive 360 Degree Beamforming
Features
USB 3.0 plug and play, driver included
Storage: 8GB
Connection Interface
Compliant with USB 3.0 Type A
Driver Support
Windows 10, 64-bit RS3 v1709 above only
Dimension
Size: 110.3 x 59.3 x 17.3 mm
Weight: 65 g
Certication
FCC approved for indoor use
Power
USB bus power 5V
04 The Working Area
5m=500cm
Clear This Area
The Working Area
Dock
5M
Dongle
1M
DongleDock
The working range of the dock is a half-circle in
front of itself, with a radius of 5 meters. The dock
should be placed as the same level as the dongle
or within 1m higher than the dongle
Our dongle is omnidirectional and can be plugged
through the left or right side of the laptop.
The network connect session will disconnect after
leaving the working range. However, the LED light
or UI will only respond 60 seconds later.
05Chapter 1 - Installing the dock
Chapter 1 – Installing the dock
Step 1 – Setting Up The Dock
To set up the dock, do the following:
◘ Connect the power adapter to the power
connector of the dock.
◘ Plug the power adapter to an electrical socket.
◘ Turn on the dock by pressing the power button.
◘ If an external monitor is available, connect the
external monitor to the appropriate connector
(HDMI or VGA connector) on the dock.
◘ Position your laptop close to the dock, within 5m
(16 feet).Make sure the dongle face to the dock.
1. External Monitor
2. VGA Table
3. HDMI Table
4. Dock
5. AC Power Adapter
6. Laptop
7. Dongle
1
2
3
4
5
7
6
06 Chapter 1 - Installing the dock
Step 2 – Execution The Installer
Driver Installation
The USB driver should be enabled and the window automatically displayed,
allowing you to follow the steps below. If no window pops up, please check the
“CD Drive“ under ”This PC”. When your laptop displays the contents as below,
please double click to continue.
Please note that the installer only installs the drivers for Hive. If your USB
device requires vendor driver, install your USB device driver.
Visit：http://millitronic.com.tw for new updates.
07Chapter 1 - Installing the dock
◘ After executing the installer, it will guide you
through the installation of the MilliDock application.
Click “Yes” to continue the installation
◘ It will then display the screen below. Please click
the “Next” button to continue with installation.
08 Chapter 1 - Installing the dock
◘ The License Agreement is then shown. Choose
“I accept …” and click “Next” to continue.
◘ The user can select the components to install
during this phase. All of these drivers are needed
for MillitronicDock to operate. Click “Next” to
continue with installation.
Step 3 - License Agreement And Choose components
Indice
