Mindeo MD61 Series Manuale utente

Note: 1. More details refer to User Manual. 2. For better readability, please print this document with laser printer. 3. Version: MD61xx_QG_EN_V1.2.

MD61xx image barcode scanner quick guide

Note

Parts of the scanner

①Beeper

②LED

③Exit window

④Trigger

⑤Cable interface port

⑥Release-hole of the cable

Installing the cable

1. Switch off the host;

2. Refer to the below pictures, connect the host with the scanner based on different cables;

3. Ensure that all connections are secure.

4. Switch on the host system. If the installation is successful, the beeper will beep and LED

will light.

USB cable

RS232 cable

Removing the cable

1. Find the release-hole.

2. Insert a thin wire into the hole and pull out the cable gently.

Reading techniques

1. Press and hold the trigger, an aiming beam is projected which is suggested to be centered

over the barcode.

2. In general, the optimal reading range is limited to 5-7cm regardless of the size of the

minimal element of the barcode.

3. On a successful reading, the scanner will beep once, and the illumination and aiming

patterns die out. Then the scanner transmits barcode message to the host.

Return default parameters and version information

Default value initialization

Firmware version list

Note: If the reader USB input too fast causing the host can not normally receive data, please

scan the barcode below:



A standard packing includes a scanner, a USB cable and a CD (or a user manual).



Accessories include a stand, a RS232 cable, and a 5V adaptor.



Use a piece of dry and soft cloth when cleaning the scanner is in need.

Note: 1. More details refer to User Manual. 2. For better readability, please print this document with laser printer. 3. Version: MD61xx_QG_EN_V1.2.

Programming instruction and example

Two programming modes have been provided as bellows:

Single-scan setting

Scan the appropriate

Single-scan setting

Example: to set Flow control to be XON/XOFF.

Multiple-scan setting

Scan “Option bar code”

Scan “the 1st character of option”

Scan “the 2nd character of option”

Scan “END”

Example: to set Flow control to be XON/XOFF.

Quick setting to enable/disable Auto-detection

Note: The stand is an optional accessory.

Scan the barcode “EN-AutoDete” on the stand to enable Auto-detection.

Scan the barcode “DIS-AutoDete” on the stand to disable Auto-detection. Note: The

Scanning mode will switch to momentary.

Assembling the stand

Note: The stand is an optional accessory.

1. See the figure above, tighten the screws.

2. Bend the neck to the desired position for scanning.

3. Screw mounting: Screw one #10 wood screw into each screw-mount-hole until the base of

the stand is secured.

4. Tape mounting: ①Peel the paper liner off one side of each piece of tape and place the

sticky surface over each of the three rectangular tape holders. ②Peel the paper liner off

the exposed sides of each piece of tape and press the stand on a flat surface until it is

secure.

DIS-AutoDete

EN-AutoDete

Altri manuali per MD61 Series

Altri manuali Mindeo Lettore di codici a barre

Mindeo

Mindeo CS-I Series Manuale utente

Mindeo

Mindeo MP168 Manuale utente

Mindeo

Mindeo ES4200 Manuale utente

Mindeo

Mindeo CS3290-2D Manuale utente

Mindeo

Mindeo MD6600 Manuale utente

Mindeo

Mindeo CR40 Series Manuale utente

Mindeo

Mindeo MP83xx Manuale utente

Mindeo

Mindeo MD6000 Manuale utente

Mindeo

Mindeo MP758 Manuale utente

Mindeo

Mindeo FM100 Manuale utente

Mindeo

Mindeo CS3290 Manuale utente

Mindeo

Mindeo CS2190 Manuale utente

Mindeo

Mindeo MD60 Series Manuale utente

Mindeo

Mindeo MD61 Series Manuale utente

Mindeo

Mindeo CS2290 Manuale utente

Mindeo

Mindeo MD29 Series Manuale utente

Mindeo

Mindeo MP725 Manuale utente

Mindeo

Mindeo MP83 Series Manuale utente

Mindeo

Mindeo MP82 Series Manuale utente

Mindeo

Mindeo ES168 Manuale utente

Mindeo

Mindeo MD22xx Manuale utente

Mindeo

Mindeo MD22 Series Manuale utente

Mindeo

Mindeo MD65 Series Manuale utente

Mindeo

Mindeo MD6000 Manuale utente

Manuali Lettore di codici a barre popolari di altre marche

POSMicro

POSMicro Datalogic PowerScan D7100 Manuale utente

Marson

Marson MT780 Guida rapida alla configurazione

NCR

NCR RealPOS Manuale utente

Motorola

Motorola SE3300 Guida rapida alla configurazione

Element

Element P130BT Manuale utente

Motorola

Motorola Symbol LS3008 Manuale di installazione e funzionamento

Meec tools

Meec tools OBD-II / VAG Manuale utente

SICK

SICK CLP 100 Manuale utente

Royal Tag SA

Royal Tag SA I-Read Manuale utente

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuale utente

Meteor

Meteor 8310 Manuale utente

Denso

Denso BHT-500B Manuale utente

Datalogic

Datalogic Heron HD3130 Manuale utente

Motorola

Motorola MP6000 Istruzioni di montaggio

Newland

Newland NLS-HR15-BT Manuale utente

ARTDEV

ARTDEV AS-1310 Manuale utente

Aopos

Aopos AS290 Manuale utente

ENS

ENS 367-5455 Manuale utente