Mirion Technologies CheckPoint:Gate RTM690 Nota di rilascio

Technical handbook RTM690 Contents

Rev.-no.: D300041, Zu, Date: 01.08.16 File: D300041.docx

Technical Handbook

CheckPoint:Gate™

RTM690

August 2016

Small Items Monitor

Radiation. Safety.

Contents Technical handbook RTM690

Rev.-no.: D300041, Zu, Date: 01.08.16 File: D300041.docx

Mirion Technologies (RADOS) GmbH

D-22761 Hamburg (Germany)

Ruhrstraße 49

fon: x49-40-85193-0

fax: x49-40-85193-256

The copyright protection claimed includes all forms and matters of

copyrighted material and information now allowed by statutory or

judicial law or hereinafter granted, including without limitation, material

generated from the software programs that are displayed on

the screen such as styles, templates, icons, screen displays, looks, etc.

All RADOS product names and product numbers mentioned in this

publication are trademarks of Mirion Technologies (RADOS) GmbH.

Other company brands and product names may be trademarks or

registered trademarks of the respective companies and are also

acknowledged.

All data in this manual takes place using best knowledge, but without

guarantee. We reserve, in the interest of our customers, that

improvements and corrections at hardware, software and documentation

will be made any time without announcement.

We are grateful for suggestions and critic regarding this documentation or

the RTM itself.

(E-Mail-Address: hamburg-inf[email protected])

Printed in Germany.

Technical handbook RTM690 Contents

iii

Rev.-no.: D300041, Zu, Date: 01.08.16 File: D300041.docx

General

Technical data

Circuit drawings

Description and operation

Equipment and measurement process

Service

Parameter setting and equipment administration

User administration

User profile settings

System check

Monitor Efficiency Determination and Nuclide Administration

Not used

Detector

Component description, maintenance and replacement

Trouble shooting and repair

Diagnose and rectify equipment faults

Maintenance

Hardware Setup / Transport / Storage

10.

Nomenclature

Index / Glossary

11.

Supporting documents

Test protocol / Software / Certificates / Repair Procedures / Third Party Documents

12.

Contents Technical handbook RTM690

Rev.-no.: D300041, Zu, Date: 01.08.16 File: D300041.docx

Technical handbook RTM690 Contents

Rev.-no.: D300041, Zu, Date: 01.08.16 File: D300041.docx

Imprint

MANUFACTURER: Mirion Technologies (RADOS) GmbH

Ruhrstraße 49

22761 Hamburg

Germany

Phone: +49 (0)40-85193-0

Fax : +49 (0)40-85193-256

E-Mail: hamburg-i[email protected]

PREPARED AND

TRANSLATED BY: MIRION TECHNOLOGIES (RADOS) GMBH

SOFTWARE: MIRION TECHNOLOGIES (RADOS) GMBH

LAYOUT BY: MIRION TECHNOLOGIES (RADOS) GMBH

R. Zucht

Revision-Control

Revision

Date

Modification

Name

D300001

06/2006

Release due QNX6 Software adaption

MH/Zu

D300011

09/2009

Update

Goe/Zu

D300021

05/2012

Update PC2010

Zu/LBi

D300031

04/2014

Design/Logo

D300041

08/2016

PC modification

Contents Technical handbook RTM690

Rev.-no.: D300041, Zu, Date: 01.08.16 File: D300041.docx

Contents and update

Chapter

Revision

D3.00.04.1

Generation

time

File - Name

Contents / Imprint

D3.00.04.1

01.08.2016

D300041.doc

General

01.08.2016

Reg1_e.doc

Technical data

01.08.2016

Reg2_e.doc

Description and operation

01.08.2016

Reg3_e.doc

Service

01.08.2016

Reg4_e.doc

User administration

01.08.2016

Reg5_e.doc

System check

01.08.2016

Reg6_e.doc

Not used

01.08.2016

Reg7_e.doc

Detector

01.08.2016

Reg8_e.doc

Trouble shooting and repair

01.08.2016

Reg9_e.doc

Maintenance

01.08.2016

Reg10_e.doc

Nomenclature

01.08.2016

Reg11_e.doc

Supporting documents

01.08.2016

Reg12_e.doc

Technical handbook RTM690 Contents

vii

Rev.-no.: D300041, Zu, Date: 01.08.16 File: D300041.docx

Table of content

1General................................................................................................i

1.1 Health Physics Product Families................................................. 1-1

1.2 CheckPoint:Waste™ family......................................................... 1-1

1.3 Structure and subdivision............................................................ 1-6

1.4 Product information ..................................................................... 1-9

1.5 Maintenance and safety............................................................ 1-10

1.6 Operation and maintenance...................................................... 1-10

1.7 Safety notices............................................................................ 1-11

1.8 Safety precautions..................................................................... 1-13

1.9 Operating and User Software.................................................... 1-19

1.10 Start-up menu........................................................................ 1-25

1.11 Authoritative regulations and guide lines............................... 1-31

1.12 Copyright ............................................................................... 1-32

1.13 Default-user ........................................................................... 1-33

2Technical data....................................................................................i

2.1 Technical data............................................................................. 2-1

2.2 Response capability.................................................................... 2-3

2.3 Efficiencies for detectors ............................................................. 2-4

2.4 Circuit drawings........................................................................... 2-5

3Description and operation ................................................................i

3.1 View of RTM690.......................................................................... 3-1

3.2 Design- and component view of RTM690 (optional)................... 3-2

3.3 General........................................................................................ 3-3

3.4 RTM690 general.......................................................................... 3-4

3.5 Alarm displays........................................................................... 3-13

3.6 Formulas and algorithms........................................................... 3-14

3.7 Measurement computer and electronic..................................... 3-17

3.8 User software functional sequence........................................... 3-19

3.9 Function of RTM690.................................................................. 3-20

3.10 Measuring procedure description .......................................... 3-25

3.11 Measurement mode............................................................... 3-29

3.12 Channel configuration............................................................ 3-31

4Service ................................................................................................i

4.1 Service......................................................................................... 4-3

4.2 Service I/O test (input and output test)........................................ 4-7

4.3 Measurement status.................................................................... 4-8

4.4 Detector status .......................................................................... 4-10

4.5 Parameters (setting).................................................................. 4-13

4.6Database................................................................................... 4-24

4.7 Misc/Statistics............................................................................ 4-25

4.8 Help........................................................................................... 4-26

4.9 Quit (exit program) .................................................................... 4-28

5User administration ...........................................................................i

5.1 User profile program.................................................................... 5-1

Contents Technical handbook RTM690

viii

Rev.-no.: D300041, Zu, Date: 01.08.16 File: D300041.docx

6System check.....................................................................................i

6.1 System check...............................................................................6-1

6.2 General mathematical calculations..............................................6-5

6.3 Start .............................................................................................6-7

6.4 Service.........................................................................................6-8

6.5 User ...........................................................................................6-10

6.6 Parameter..................................................................................6-11

6.7 Measurement database.............................................................6-17

6.8 Nuclide database.......................................................................6-20

6.9 Multiple sources.........................................................................6-22

6.10 Working processes.................................................................6-23

6.11 Determination of channel efficiency (calibration) ...................6-30

6.12 Help........................................................................................6-40

6.13 Close (exit program)...............................................................6-40

7Not used .............................................................................................i

8Detector..............................................................................................i

8.1 Detectors......................................................................................8-1

8.2 Exchange of an detector module.................................................8-8

8.3 Exchange of a detector..............................................................8-11

9Trouble shooting and repair.............................................................i

9.1 General Guideline and performance criteria................................9-1

9.2 Guideline for trouble shooting......................................................9-3

9.3 Fault messages and rectification .................................................9-5

9.4 Repair ........................................................................................9-13

10 Maintenance...................................................................................i

10.1 Maintenance...........................................................................10-1

10.2 RTM690 maintenance..........................................................10-17

10.3 Conveyor maintenance ........................................................10-18

10.4 Mains supply ........................................................................10-24

10.5 Switch-ON............................................................................10-24

10.6 Cleaning...............................................................................10-24

10.7 Transport..............................................................................10-26

10.8 UPS-unit...............................................................................10-26

10.9 Storage.................................................................................10-26

11 Nomenclature.................................................................................i

11.1 Index.......................................................................................11-1

11.2 Glossary.................................................................................11-5

12 Supporting documents ................................................................. i

12.1 Test protocol................................................................................. i

12.2 Software / License.......................................................................iii

12.3 Conformity documents ................................................................ v

12.4 Third party documents ...............................................................vii

Technical handbook RTM690 Register 1

Rev.-no.: D300041, Zu, Date: 01.08.16 File: Reg1_e.docx

1 General

1General................................................................................................i

1.1 Health Physics Product Families................................................. 1-1

1.2 CheckPoint:Waste™ family......................................................... 1-1

1.2.1 Type series description .................................................... 1-2

1.2.2 Type series options .......................................................... 1-3

1.2.2.1 Mechanical options.................................................................1-4

1.2.2.2 Type series software options..................................................1-5

1.2.2.3 Type series technical handbook conventions.........................1-5

1.3 Structure and subdivision............................................................ 1-6

1.3.1 Technical handbook systems and data carrier................. 1-6

1.3.2 Data carrier for text systems ............................................ 1-6

1.3.3 Applied symbols and writing style conventions................ 1-7

1.4 Product information ..................................................................... 1-9

1.5 Maintenance and safety............................................................ 1-10

1.6 Operation and maintenance...................................................... 1-10

1.7 Safety notices............................................................................ 1-11

1.7.1 Electrical safety .............................................................. 1-11

1.7.2 Maintenance safety ........................................................ 1-12

1.7.3 Operational safety .......................................................... 1-12

1.7.4 Calling for service........................................................... 1-12

1.8 Safety precautions..................................................................... 1-13

1.8.1 Electronics...................................................................... 1-14

1.8.2 Name plate ..................................................................... 1-15

1.8.3 Transportation system.................................................... 1-17

1.8.4 Transportation RTM690 Trailer ...................................... 1-17

1.8.5 Emergency stop.............................................................. 1-18

1.9 Operating and User Software.................................................... 1-19

1.9.1 QNX 6.3x –operating system with runtime adaptation.. 1-19

1.9.2 Brief introduction to QNX6.............................................. 1-20

1.9.3 Operation of QNX6......................................................... 1-21

1.9.4 General conventions of this documentation................... 1-22

1.9.5 Operation of window elements....................................... 1-23

1.9.6 CeMoSys Client, CeMoSys Server (OPTION)............... 1-24

1.10 Start-up menu........................................................................ 1-25

1.10.1 User Software................................................................. 1-26

1.10.1.1 Measurement mode..........................................................1-27

1.10.1.2 Service mode....................................................................1-27

1.10.2 Operational submenu..................................................... 1-27

1.10.2.1 System check...................................................................1-27

1.10.2.2 User Profile.......................................................................1-27

1.10.2.3 Load /Save configuration..................................................1-27

1.10.2.4 HW setup..........................................................................1-28

1.10.2.5 System parameter............................................................1-28

1.10.2.6 QNX-Shell.........................................................................1-28

1.10.2.7 Print screenshot................................................................1-28

1.10.3 End User software.......................................................... 1-29

1.11 Authoritative regulations and guide lines............................... 1-31

1.11.1 Guide line for machines.................................................. 1-31

1.11.2 Supporting documentation ............................................. 1-31

1.12 Copyright ............................................................................... 1-32

Rev.-no.: D300041, Zu, Date: 01.08.16 File: Reg1_e.docx

1.13 Default-user............................................................................1-33

Figures

Figure 1-1: Product family overview.................................................................................. 1-1

Figure 1-2: RTM690 view................................................................................................. 1-1

Figure 1-3: RTM690 type series overview......................................................................... 1-2

Tabelle 1-4: RTM690 detector type overview.................................................................... 1-2

Figure 1-5: Mains warning.............................................................................................. 1-14

Figure 1-6: Name plate RTM690 .................................................................................... 1-15

Figure 1-7: RTM690 emergency off................................................................................ 1-18

Figure 1-8: Emergency off view...................................................................................... 1-18

Figure 1-9: QNX RTOS system overview (picture source: QNX Software systems)........ 1-21

Figure 1-10: Start-up menu............................................................................................. 1-25

Figure 1-11: Software overview...................................................................................... 1-26

Figure 1-12: Service button ............................................................................................ 1-27

Figure 1-13: Pictogram “printer”...................................................................................... 1-28

Figure 1-14: RTM690 close............................................................................................ 1-29

Figure 1-15: RTM690 shutdown .................................................................................... 1-29

Figure 1-16: QNX shutdown........................................................................................... 1-29

Indice

Altri manuali Mirion Technologies Attrezzature industriali

Mirion Technologies

Mirion Technologies CheckPoint:Waste RTM614 Manuale utente

Manuali Attrezzature industriali popolari di altre marche

ABB

ABB Unifix AD Manuale

Mark 7

Mark 7 Evolution Manuale utente

Husky

Husky HyPET Manuale utente

bora

bora PM-1800 Manuale utente

Grizzly

Grizzly T32428 Manuale utente

Siemens

Siemens 8MF1 Series Manuale utente

ABB

ABB HT610965 Manuale utente

ABB

ABB SafeLink Manuale utente

Phoenix

Phoenix PHX-150 Manuale utente

ABB

ABB A165-L32 Manuale utente

ABB

ABB HT842936 Manuale utente

Rioned

Rioned UrbanJet Manuale utente

Hermetica

Hermetica 10 Series Manuale utente

HORNER

HORNER OEE Solution Manuale utente

Hammerhead

Hammerhead HG375 Manuale utente

SCHUNK

SCHUNK VERO-S NSE-A3 138 Istruzioni utente

ABB

ABB HT566657 Manuale utente

Webasto

Webasto GSE CAN Manuale utente