Mitsubishi Electric AJ61BT11 Manuale utente

User’s Manual

(Hardware)

AJ61BT11

A1SJ61BT11

Thank you for buying the general-purpose programmable controller

MELSEC-A Series.

CC-Link

System Master/Local Module

Prior to use, please read both this manual and detailed manual

thoroughly and familiarize yourself with the product.

MODEL AJ61BT11-U-H-JE

MODEL

CODE 13JT18

IB(NA)-0800146-F(1612)MEE

A-1

SAFETY PRECAUTIONS

(Read these precautions before using this product.)

Before using this product, please read this manual and the relevant manuals

carefully and pay full attention to safety to handle the product correctly.

In this manual, the safety precautions are classified into two levels:

" WARNING" and " CAUTION".

Under some circumstances, failure to observe the precautions given under

" CAUTION" may lead to serious consequences.

Observe the precautions of both levels because they are important for personal

and system safety.

Make sure that the end users read this manual and then keep the manual in a safe

place for future reference.

[DESIGN PRECAUTIONS]

WARNING

For the operating status of each station after a data link failure, refer to

Chapter 5 in the user's manual.

The master station or local station cannot detect errors when a station

specified as an error-invalidated station becomes communication error.

CAUTION

Do not install the control lines or communication cables together with main

circuit lines or power cables. Keep a distance of 100mm (3.94 inches) or

more between them. Failure to do so may result in malfunction due to noise.

WARNING

Indicates that incorrect handling may cause

hazardous conditions, resulting in death or severe

injury.

Indicates that incorrect handling may cause

hazardous conditions, resulting in minor or moderate

injury or property damage.

CAUTION

A-2

[INSTALLATION PRECAUTIONS]

[WIRING PRECAUTIONS]

CAUTION

Use the programmable controller in an environment that meets the

specifications in the user's manual of the CPU module used.

Failure to do so may result in electric shock, fire, malfunction, or damage to

or deterioration of the product.

Insert the tabs at the bottom of the module into the holes in the base unit

before mounting the module.

(For the AnS series modules, tighten the screws to the base unit with the

specified torque.)

Incorrect mounting may cause malfunction, failure, or drop of the module.

Shut off the external power supply for the system in all phases before

mounting or removing the module.

Failure to do so may result in damage to the product.

Do not directly touch any conductive part of the module.

Doing so can cause malfunction or failure of the module.

WARNING

Shut off the external power supply for the system in all phases before wiring.

Failure to do so may result in electric shock or damage to the product.

After wiring, attach the included terminal cover to the module before turning it

on for operation.

Failure to do so may result in malfunction.

A-3

[WIRING PRECAUTIONS]

CAUTION

Tighten the terminal screws within the specified torque range.

Undertightening can cause short circuit, fire, or malfunction.

Overtightening can damage the screw and/or module, resulting in drop, short

circuit, or malfunction.

Prevent foreign matter such as dust or wire chips from entering the module.

Such foreign matter can cause a fire, failure, or malfunction.

Place the cables in a duct or clamp them.

If not, dangling cables may swing or inadvertently be pulled, resulting in

damage to the module or cables or malfunction due to poor contact.

Do not install the control lines and communication cables together with the

main circuit lines or power cables.

Doing so may cause malfunction due to noise.

Use applicable solderless terminals and tighten them within the specified

torque range. If any spade solderless terminal is used, it may be

disconnected when the terminal screw comes loose, resulting in failure.

When disconnecting the cable from the module, do not pull the cable by the

cable part.

When removing the cable with a connector, hold the connector on the side

that is connected to the module.

When removing the cable without a connector, loose the screws on the side

that is connected to the module.

Pulling the cable that is still connected to the module may result in damage to

the module or cable, or malfunction due to poor contact.

A-4

[STARTUP AND MAINTENANCE PRECAUTIONS]

[DISPOSAL PRECAUTIONS]

WARNING

Do not touch any terminal while power is on.

Doing so can cause electric shock.

Shut off the external power supply for the system in all phases before

cleaning the module or retightening the terminal screws or module fixing

screws.

Failure to do so may result in electric shock.

Undertightening can cause drop of screw, short circuit, or malfunction.

Overtightening can damage the screw and/or module, resulting in drop, short

circuit, or malfunction.

CAUTION

Do not disassemble or modify the modules. Doing so may cause failure,

malfunction, injury, or a fire.

Shut off the external power supply for the system in all phases before

mounting or removing the module. Failure to do so may cause the module to

fail or malfunction.

After the first use of the product, do not mount/remove the module to/from the

base unit, and the terminal block to/from the module more than 50 times (IEC

61131-2 compliant) respectively.

Exceeding the limit of 50 times may cause malfunction.

Before handling the module, touch a grounded metal object to discharge the

static electricity from the human body.

Failure to do so may cause the module to fail or malfunction.

CAUTION

When disposing of this product, treat it as industrial waste.

A-5

CONDITIONS OF USE FOR THE PRODUCT

(1) Mitsubishi programmable controller ("the PRODUCT") shall be used in

conditions;

i) where any problem, fault or failure occurring in the PRODUCT, if any,

shall not lead to any major or serious accident; and

ii) where the backup and fail-safe function are systematically or

automatically provided outside of the PRODUCT for the case of any

problem, fault or failure occurring in the PRODUCT.

(2) The PRODUCT has been designed and manufactured for the purpose of

being used in general industries.

MITSUBISHI SHALL HAVE NO RESPONSIBILITY OR LIABILITY

(INCLUDING, BUT NOT LIMITED TO ANY AND ALL RESPONSIBILITY

OR LIABILITY BASED ON CONTRACT, WARRANTY, TORT, PRODUCT

LIABILITY) FOR ANY INJURY OR DEATH TO PERSONS OR LOSS OR

DAMAGE TO PROPERTY CAUSED BY the PRODUCT THAT ARE

OPERATED OR USED IN APPLICATION NOT INTENDED OR

EXCLUDED BY INSTRUCTIONS, PRECAUTIONS, OR WARNING

CONTAINED IN MITSUBISHI'S USER, INSTRUCTION AND/OR

SAFETY MANUALS, TECHNICAL BULLETINS AND GUIDELINES FOR

the PRODUCT.

("Prohibited Application")

Prohibited Applications include, but not limited to, the use of the

PRODUCT in;

• Nuclear Power Plants and any other power plants operated by Power

companies, and/or any other cases in which the public could be

affected if any problem or fault occurs in the PRODUCT.

• Railway companies or Public service purposes, and/or any other cases

in which establishment of a special quality assurance system is

required by the Purchaser or End User.

• Aircraft or Aerospace, Medical applications, Train equipment, transport

equipment such as Elevator and Escalator, Incineration and Fuel

devices, Vehicles, Manned transportation, Equipment for Recreation

and Amusement, and Safety devices, handling of Nuclear or

Hazardous Materials or Chemicals, Mining and Drilling, and/or other

applications where there is a significant risk of injury to the public or

property.

A-6

Notwithstanding the above, restrictions Mitsubishi may in its sole

discretion, authorize use of the PRODUCT in one or more of the

Prohibited Applications, provided that the usage of the PRODUCT is

limited only for the specific applications agreed to by Mitsubishi and

provided further that no special quality assurance or fail-safe, redundant

or other safety features which exceed the general specifications of the

PRODUCTs are required. For details, please contact the Mitsubishi

representative in your region.

A-7

REVISIONS

*The manual number is given on the bottom right of the cover.

2000 MITSUBISHI ELECTRIC CORPORATION

Print Date *Manual Number Revision

Jul.,2000 IB(NA)-0800146-A First edition

Mar.,2006 IB(NA)-0800146-B

SAFETY PRECAUTIONS,

Conformation to the EMC Directive and Low

Voltage Instruction, Section 1.1, 2.1, 5.1

Aug.,2007 IB(NA)-0800146-C

Chapter 3, Section 6.1, 6.2

Jul.,2009 IB(NA)-0800146-D "PLC" was changed to "programmable controller".

SAFETY PRECAUTIONS, Compliance with the

EMC and Low Voltage Directives, Section 1.1,

2.1 to 2.2, Chapter 3, 4.1, 5.1, 6.1

Dec.,2011 IB(NA)-0800146-E

COMPLIANCE WITH EMC AND LOW VOLTAGE

DIRECTIVES, Section 5.1

SAFETY PRECAUTIONS(Chinese),

CONDITIONS OF USE FOR THE PRODUCT

Dec.,2016 IB(NA)-0800146-F

Chapter 3, Section 6.2

This manual confers no industrial property rights or any rights of any other kind, nor does it

confer any patent licenses. Mitsubishi electric Corporation cannot be held responsible for any

problems involving industrial property rights which may occur as a result of using the contents

noted in this manual.

Correction

Addition

Partial correction

A-8

CONTENTS

1. Overview ......................................................................................................... 1

1.1 Definition of Ver.1.10 ................................................................................ 1

2. Performance Specification .............................................................................. 2

2.1 Performance specification ........................................................................ 2

2.1.1 Maximum overall cable distance ....................................................... 4

2.2 CC-Link dedicated cable .......................................................................... 4

3. Name and Setting of Each Component .......................................................... 5

4. Loading and Installation ................................................................................ 10

4.1 Handling precautions .............................................................................. 10

4.2 Installation environment.......................................................................... 11

5. External Wiring.............................................................................................. 12

5.1 Wiring the CC-Link dedicated cable ....................................................... 12

6. External Dimensions ..................................................................................... 14

6.1 AJ61BT11............................................................................................... 14

6.2 A1SJ61BT11 .......................................................................................... 15

A-9

COMPLIANCE WITH EMC AND LOW VOLTAGE DIRECTIVES

(1) Method of ensuring compliance

To ensure that Mitsubishi programmable controllers maintain EMC

and Low Voltage Directives when incorporated into other

machinery or equipment, certain measures may be necessary.

Please refer to one of the following manuals.

• User's manual for the CPU module used

• User's manual (hardware) for the CPU module or base unit

used

The CE mark on the side of the programmable controller indicates

compliance with EMC and Low Voltage Directives.

(2) Additional measures

To ensure that this product maintains EMC and Low Voltage

Directives, please refer to one of the manuals listed under (1).

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Mitsubishi Electric Controllori

Mitsubishi Electric

Mitsubishi Electric Artisan MELSEC-Q Series Manuale utente

Mitsubishi Electric

Mitsubishi Electric FX3U-CAN Manuale utente

Mitsubishi Electric

Mitsubishi Electric MELSEC iQ-F FX5 Manuale utente

Mitsubishi Electric

Mitsubishi Electric MELDAS MDS-R Series Manuale utente

Mitsubishi Electric

Mitsubishi Electric PAC-YT34STA Manuale utente

Mitsubishi Electric

Mitsubishi Electric MELSEC iQ-F FX5-CCLIEF Manuale utente

Mitsubishi Electric

Mitsubishi Electric MELSEC iQ-R-R00CPU Manuale utente

Mitsubishi Electric

Mitsubishi Electric MELSEC Q Series Manuale utente

Mitsubishi Electric

Mitsubishi Electric MELSENSOR MELSEC iQ-R MH11H01A0SNA Manuale utente

Mitsubishi Electric

Mitsubishi Electric L02SCPU Manuale utente

Mitsubishi Electric

Mitsubishi Electric MELSEC FX2N-16SW Manuale utente

Mitsubishi Electric

Mitsubishi Electric MELSEC iQ-R C Series Manuale del proprietario

Mitsubishi Electric

Mitsubishi Electric MELSEC iQ-R Series Manuale utente

Mitsubishi Electric

Mitsubishi Electric FX3UC-4AD Manuale utente

Mitsubishi Electric

Mitsubishi Electric MELSEC Q Series Manuale utente

Mitsubishi Electric

Mitsubishi Electric MELSEC iQ-R Series Manuale utente

Mitsubishi Electric

Mitsubishi Electric MELSEC-Q/L Manuale del proprietario

Mitsubishi Electric

Mitsubishi Electric MELSERVO-JET MR-JET Manuale utente

Mitsubishi Electric

Mitsubishi Electric MELSEC FX3U Manuale del proprietario

Mitsubishi Electric

Mitsubishi Electric Central Controller G-50A Manuale utente

Mitsubishi Electric

Mitsubishi Electric MELSEC FX Series Manuale del proprietario

Mitsubishi Electric

Mitsubishi Electric MELSEC iQ-R Series Manuale utente

Mitsubishi Electric

Mitsubishi Electric VAR-6A Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q Series Manuale utente

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente