Mitsubishi Electric CP9000DW Manuale utente

DIGITAL COLOR PRINTER

MODEL

CP9000DW

OPERATION MANUAL

THIS OPERATION MANUAL IS IMPORTANT

TO YOU.

PLEASE READ IT BEFORE USING YOUR

DIGITAL COLOR PRINTER.

POWER

ALARM

PAPER/INKRIBBON

DATA

READY

CANCEL

DOOR OPEN FEED&CUT

COOLING

This digital color printer complies with the requirements and other relevant

provisions of the EC Directive 89/336/EEC, 73/23/EEC, 93/68/EEC and 1999/

5/EC.

The electro-magnetic susceptibility has been chosen at a level that gains

proper operation in residential areas, on business and light industrial premises

and on small-scale enterprises, inside as well as outside of the buildings. All

places of operation are characterised by their connection to the public low

voltage power supply system.

WARNING:

Use the included AC power cord so as not to interfere with radio and television reception.

If you use other cables, it may cause interference with radio and television reception.

WARNING :

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO

RAIN OR MOISTURE.

INFORMATION

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme àla norme NMB-003 du Canada.

CONNECTIONS OTHERS

PRECAUTIONS FEATURES PREPARATION TROUBLE-

SHOOTING

CAUTION :

TO REDUCE THE RISK OF ELECTRIC

SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended

to alert the user to the presence of uninsulated “dangerous voltage”within the

product’s enclosure that may be of sufficient magnitude to constitute the risk of

electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to

the presence of important operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

The “Caution, hot surface”symbol indicates that the marked item may be hot and

should not be touched.

The “ON/OFF”symbol indicates connection to or disconnection from the mains,

at least for mains switches.

The “Alternating current”symbol indicates that the equipment is suitable for

alternating current only.

CAUTION

CAUTION:

Changes or modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply with the limits for a ClassAdigital device,

pursuanttoPart15oftheFCCRules. Theselimitsaredesignedtoprovidereasonableprotection

against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his or her own

expense.

Operation is subject to the following two conditions;

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired

operation of the device.

WARNING:

In the USA or Canada, use the AC power cord according to the

recommendations as below, in order to comply with UL60950

and CAN/CSA C22.2 No. 60950-00.

Case 1. Connect to the 120V receptacle of the room or the host

equipment.

The AC power cord should be UL or CSA approved

and consist of type SJT or SVT, size 16 or 18AWG,

length 2.5m or shorter cord with IEC320/C13 type,

125V 10A or higher rating connector and NEMA 5-15

type, 125V 10A or higher rating plug.

Case 2. Connect to the 230V receptacle of the room or the host

equipment.

The AC power cord should be UL or CSA approved

and consist of type SJT or SVT, size 16 or 18AWG,

length 2.5m or shorter cord with IEC320/C13 type,

250V 10A or higher rating connector and NEMA 6-15

type, 250V 10A or higher rating plug.

WARNING:

In Europe, use the AC power cord according to the recommen-

dations as below, in order to comply with EN60950.

Connect to the 230V receptacle of the room or the host equip-

ment.

The AC power cord should be VDE approved and consist of

core size 1mm2or bigger, length 2.5m or shorter cord with

IEC320/C13 type, 250V 10A or higher rating connector and

CEE(7)VII type or IEC 320-2.2/E type, 250V 10A or higher

rating plug.

CONNECTIONS OTHERS

PRECAUTIONS FEATURES PREPARATION TROUBLE-

SHOOTING

CONTENTS

Contents ................................................................................................ 1

Safety precautions ................................................................................ 2-4

Special features .................................................................................... 5

Unpacking ............................................................................................. 6

Features and functions ......................................................................... 7-8

Front panel ............................................................................................. 7

Side and rear panel ................................................................................ 8

Connections .......................................................................................... 9-11

Connection with SCSI data signal equipment ........................................ 9

Connection with USB data signal equipment ......................................... 10

Setting of DIP switches .......................................................................... 11

Before operation.................................................................................... 12-17

Paper / ink ribbon set ............................................................................. 12

Installation of print paper ........................................................................ 12-14

Installation of ink ribbon ......................................................................... 14-15

Usage and Storage of Paper / ink ribbon set ......................................... 16

Installation of printer driver ..................................................................... 17

Error messages and countermeasures ................................................. 18-20

Indications on the front panel and countermeasures ............................. 18

Overcoming paper jams ......................................................................... 19

Before calling for service ........................................................................ 20

Instructions for transportation ................................................................ 20

Cleaning ................................................................................................ 21

Specifications and options .................................................................... 22

CONTENTS

In the interest of safety, please observe the following precautions:

POWER REQUIREMENT

This Digital Color Printer is designed to operate on 120V AC 50/60Hz in U.S.A. and Canada, 220V-240V AC 50/60Hz in Europe.

Never connect to any outlet or power supply having a different voltage or frequency.

WARNING : THIS APPARATUS MUST BE EARTHED.

AVERTISSEMENT: CET APPAREIL DOIT ETRE MIS A LA TERRE.

PROTECTIVE MEASURES

IF ABNORMALITIES ARISE, .....

Use of the unit during emission of smoke or abnormal sounds (without adopting countermeasures) is dangerous. In such a

case, unplug the power cord from the source outlet immediately, and request maintenance service from the sales dealer.

NEVER INSERT ANY OBJECT INTO THE UNIT

Foreign objects of any kind inserted into this unit constitute a safety hazard and can cause extensive damage.

DO NOT PLACE ANYTHING ON THE DIGITAL COLOR PRINTER

Heavy objects placed on the Digital Color Printer can cause damage or obstruct proper ventilation.

PROTECT THE POWER CORD

Damage to the power cord may cause fire or shock hazard. When unplugging, hold by the plug only and remove carefully.

DO NOT PLACE WATER CONTAINERS ON THE UNIT

Do not place flower vases, and other water-holding containers on the device. If, for some reason, water seeps to the inside of

the unit, unplug the power cord from the source outlet, and contact the sales dealer. If used without corrective measures, the

unit may be damaged.

“In the interest of safety, avoid handling of liquids near the unit.”

DO NOT REMOVE THE CABINET

Touching internal parts is dangerous, besides, it may lead to malfunction. Contact the sales dealer to carry out internal checks

and adjustments. Before opening the cover for eliminating a jammed paper, etc., be sure to disconnect the power cord plug.

UNPLUG THE POWER CORD DURING A LONG ABSENCE

Turn off the main power switch and unplug the power cord during a long absence.

WHEN TRANSPORTING THE UNIT

When transporting the unit, remove the ink ribbon and print paper from the unit.

BE CAREFUL AROUND PRINT PAPER EXIT SLOT

Don’t insert your hand or any material into the paper exit slot during printing.

Do not touch the cutter blade inside the paper exit slot.

Otherwise, your finger will be injured.

DO NOT TOUCH THE THERMALHEAD

Do not touch your hand to the thermal head (located inside the unit).

The thermal head is heated to high temperature.

This may cause injury.

BE CAREFUL WITH THE PRINTING UNIT

Do not move the unit while the printing unit is sliding out. This may cause injury.

Be careful not to catch your finger in the printing unit when the printing unit is being retracted into the unit.

CONNECTION CABLES

Use the provided power cord.

SAFETY PRECAUTIONS

CONNECTIONS OTHERS

PRECAUTIONS FEATURES PREPARATION TROUBLE-

SHOOTING

INSTALLATION LOCATIONS

MAINTAIN GOOD VENTILATION

Ventilation slots and holes are provided on the rear and both sides of this unit. Place the unit on a hard and level surface and

locate at least 10cm (4 inches) from walls to insure proper ventilation. When putting the unit on the system rack, take a space

between the unit and the back and sides of the rack.

UNSUITABLE LOCATIONS

Avoid shaky places or hot-springs areas where hydrogen sulfide and acidic ions are likely to be generated.

PLACES WITH HIGH HUMIDITY AND DUST

Do not place the unit at a high humidity and dusty locations. They can cause extensive damage to this unit. Avoid places where

the unit is likely to be exposed to oily fumes and vapors.

PLACES LIKELY TO BE EXTREMELY HOT

Places exposed to direct sunlight, or near heating appliances can attain extremely high temperatures, which may deform the

cabinet, or can become a prime cause of damage.

PLACES THE UNIT ON A HORIZONTAL LEVEL

The unit is likely to be affected if it is placed in slanted conditions or in an unstable places.

PROTECT AGAINST DEW FORMATION

In extremely cold regions, if the unit is moved quickly from an extremely cold place to warmer one, dew is likely to be formed. If

dew is formed, printing is not possible.

OPERATING AMBIENT TEMPERATURE RANGE

The operating ambient temperature range is 5°C-40°C (41°F-104°F) and the humidity of 30%-80%. When using the unit on the

system rack, be sure to keep this ambient temperature inside the rack.

FOR LONG OPERATING LIFE

UNSUITABLE MATERIALS FOR THE DIGITAL COLOR PRINTER

Coat flaking and deformation are likely to occur if the unit is wiped with chemical dusters, benzine, thinner or any other solvent, if

rubber or PVC items are left in contact with the unit for extended duration, or if the unit is sprayed with insecticide.

CARE OF THE CABINET

Unplug and clean with a soft cloth slightly moistened with a mild soap and water solution. Allow to dry completely before

operating. Never use petroleum base solutions or abrasive cleaners.

HEAD ABRASION

The thermal head, like the video head, wears out. When it is abraded, it becomes hard to print out fine details of the picture. In

such a case, it is necessary to replace the thermal head. Consult with the sales dealer for replacing the head.

CONNECTING DEVICES

Read thoroughly “Operating Precautions”of the instruction booklets for the devices connected with the Digital Color Printer. The

power cord must be disconnected after printing is over.

CAUTION ON RELOCATING

When transporting this unit, make sure it is not likely to be subjected to impacts. They can be a prime cause for damage.

Further, make sure to disconnect the power cord from the power outlet, and the cables from the connected devices.

OTHER CAUTIONS

Dust or other foreign matter adhering to the print paper or the ink cassette, or deformation resulting from exposure to extremely

low or high temperatures could cause loss of color, uneven color or lines, or wrinkles in the print images.

NOTE:

YOUR UNDERSTANDING IS REQUESTED FOR THE LOSS OF IMAGES IN MEMORY DUE TO THE SUDDEN

OCCURRENCE OF A MALFUNCTION.

As for Print paper and ink ribbon, refer to “PAPER / INK RIBBON SET”.

SAFETY PRECAUTIONS

CONNECTIONS OTHERS

PRECAUTIONS FEATURES PREPARATION TROUBLE-

SHOOTING

SPECIAL FEATURES

TWO PRINT SIZES ARE AVAILABLE DEPENDING ON THE PURPOSE

Two printing sizes, 9x13 (3.5x5”) (max.89 x 127 mm) and 10x15 (4x6”) (max.102 x 152 mm), are selectable.

HIGH SPEED PRINTING

Normal printing speed is approx.15 seconds (in 9x13 (3.5x5”) print). Use of roll paper shortens the time for installing and

removing.

LARGE CAPACITY PRINTING

Maximum of 680 prints per roll for 9x13 (3.5x5”) is offered. Large economical print capacity per roll reduces frequency of

exchanging paper and ink ribbon.

HIGH QUALITY PRINTING

CP9000DW is a dye sublimation thermal transfer color printer, which produces superior high quality images. It also produces a

continuous tone at 256 gradient and 16.7 million colors for each of Y, M, and C.

346 DPI HIGH RESOLUTION

CP9000DW has a high resolution of 346 DPI for precise illustrations and sharp photographic images.

ADDITIONAL FEATURES COMPATIBLE WITH A VARIETY OF INTERFACES AND SYSTEMS

(1) Input and output of control signals using the SCSI II and Hi-Speed USB (Ver. 2.0) interfaces.

(2) Newly developed printer driver, which reduces PC processing time .

UNPACKING

Take the printer out of the box by the following procedures. Make sure to check the accessories.

Open the top of the box.

Remove the accessories together with upper cushions.

Hold the handles of the cardboard and pull it up carefully to

take the printer together with the lower cushions out of the

box.

Make sure to pull the cardboard straight up.

Separate the printer from the cushions.

Make sure to keep the printer horizontally.

Unwrap the packing.

CONTENTS

The accessories are contained in the upper cushions. Check the contents.

Quick setup guide Ink cassette CD-ROM Paper flanges Spacers

Power cords SCSI

terminator

Altri manuali per CP9000DW

Indice

Altri manuali Mitsubishi Electric Stampante

Mitsubishi Electric

Mitsubishi Electric CP30W Manuale utente

Mitsubishi Electric

Mitsubishi Electric SmartD90EV Manuale utente

Mitsubishi Electric

Mitsubishi Electric P-95DW Manuale utente

Mitsubishi Electric

Mitsubishi Electric P95DW-DC Manuale utente

Mitsubishi Electric

Mitsubishi Electric CP-D70DW Manuale utente

Mitsubishi Electric

Mitsubishi Electric CP30W Manuale utente

Mitsubishi Electric

Mitsubishi Electric CP-C60DW-WE Manuale utente

Mitsubishi Electric

Mitsubishi Electric CP-W5000DW Manuale utente

Mitsubishi Electric

Mitsubishi Electric CP-3020DAU Guida alla configurazione

Mitsubishi Electric

Mitsubishi Electric CP-30DW Manuale utente

Mitsubishi Electric

Mitsubishi Electric CP-3800DW Manuale utente

Mitsubishi Electric

Mitsubishi Electric CP-D70DW Manuale utente

Mitsubishi Electric

Mitsubishi Electric CP9500DW-S Manuale utente

Mitsubishi Electric

Mitsubishi Electric CP9000DW Manuale utente

Mitsubishi Electric

Mitsubishi Electric CP-D90DW-SL Manuale utente

Mitsubishi Electric

Mitsubishi Electric CP-D707DW-S Manuale utente

Mitsubishi Electric

Mitsubishi Electric CP9820DW-S Manuale utente

Mitsubishi Electric

Mitsubishi Electric CP-D90DW Manuale utente

Mitsubishi Electric

Mitsubishi Electric P-95DW Manuale utente

Mitsubishi Electric

Mitsubishi Electric CP3020DE Manuale utente

Mitsubishi Electric

Mitsubishi Electric CP9800DW-S Manuale utente

Mitsubishi Electric

Mitsubishi Electric CP9820DW-S Manuale utente

Mitsubishi Electric

Mitsubishi Electric D90-WIFI-1 Manuale utente

Mitsubishi Electric

Mitsubishi Electric CP9600DW Manuale utente

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Canon

Canon i70 Series Manuale utente

Evolis

Evolis Elypso Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Canon

Canon LASER SHOT LBP-1210 Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Canon

Canon PIXMA PRO-1 Series Manuale utente

Canon

Canon PIXMA G3560 Guida all'installazione

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Epson

Epson ET-7750 Istruzioni operative

Canon

Canon CLBR 460ps Manuale utente

Eltron

Eltron P210 Guide Manuale utente

Ricoh

Ricoh MD-P1 Manuale utente

Epson

Epson SC-F7100 series Manuale utente

Epson

Epson Stylus C40UX Manuale utente

Canon

Canon imagePASS-A2 Manuale utente

Canon

Canon S820D Manuale utente