4
ASCII HEX
Function
Data (Receive)
Function
Data (Receive)
POWER ON vP 1 76h 50h 31h
POWER OFF vP 0 76h 50h 30h
INPUT COMPUTER 1 vI r1 76h 49h 72h 31h
INPUT COMPUTER 2 vI r2 76h 49h 72h 32h
INPUT DVI vI d1 76h 49h 64h 31h
INPUT VIDEO vI v1 76h 49h 76h 31h
INPUT S-VIDEO vI v2 76h 49h 76h 32h
POWER ON/OFF INPOSSIBLE vPK 0 76h 50h 4Bh 30h
POWER ON/OFF POSSIBLE vPK 1 76h 50h 4Bh 31h
NO SIGNAL SUPPLIED vSM 0 76h 53h 4Dh 30h
SIGNAL SUPPLIED vSM 1 76h 53h 4Dh 31h
LAMP OPERATING TIME vLE hhhhmm 76h 4Ch 45h hhhhmm
(on a LOW mode basis)
11)
Menu setting commands (Not executable in stand-by mode. Possible only to read during muting.)
The menu setting commands are used for the menu setting of this projector. If the personal computer sends the
command without attaching the data code, the projector attaches to the received command it’s current setting value
as the data code and send it back to the PC.
ITEM ASCII HEX VALUE
COLOR ENHANCER CE 43h 45h 0 (AUTO), 1(PRESENTATION), 2(STANDARD),
3(THEATER), 4(sRGB), 5(USER)
COLOR ENHANCER-USER
CEU1 43h 45h 55h 31h
+0(DYNAMIC), +1(NATURAL), +2(DETAIL)
+00 - 10 (BrilliantColorTM)
CONTRAST
PP 50h 50h ±30
BRIGHTNESS QQ 51h 51h ±30
COLOR TEMP. A 41h 1(STANDARD), 2(HIGH), 3(LOW), 4(USER)
COLOR TEMP.-USER(CONTRAST)
P 50h ±30±30±30(R,G,B)
COLOR TEMP.-USER(BRIGHTNESS)
Q 51h ±30±30±30(R,G,B)
COLOR T 54h ±10
TINT S 53h ±10
SHARPNESS R 52h ±05
LAMP MODE LM 4Ch 4Dh 0 (STANDARD), 1 (LOW)
AUTO POWER ON APON 41h 50h 4Fh 4Eh 0 (OFF), 1 (ON)
AUTO POWER OFF APOF 41h 50h 4Fh 46h 00 (OFF), 05, 10, 15, 30, 60
SPLASH SCREEN SS 53h 53h 0 (OFF), 1 (ON)
BACK COLOR BB 42h 42h 0 (BLACK), 1 (BLUE)
IMAGE REVERSE IR 49h 52h
0 (OFF), 1 (MIRROR), 2 (INVERT), 3 (MIRROR INVERT)
TEST PATTERN TP 54h 50h 0 (OFF), 1 (CROSS HATCH)
ZOOM/FOCUS LOCK FZL 46h 5Ah 4Ch 0 (OFF), 1 (ON)
LENS SHIFT LOCK LSL 4Ch 53h 4Ch 0 (OFF), 1 (ON)
LENS SHIFT RESET LSRST 4Ch 53h 52h 53h 54h
ASPECT SC 53h 43h 0 (AUTO), 1 (16:9), 2 (REAL)
ASPECT(Position of 16:9 image)
SCP 53h 43h 50h 0 (CENTER), 1 (UPPER), 2 (LOWER)
PASSWORD FUNCTION
PSLOCK
50h 53h 4Ch 4Fh 0****(UNLOCK), 1****(DISPLAY INPUT),
43h 4Bh 2****(MENU ACCESS) **** is a 4-digit figure (password)
MENU POSITION MP 4Dh 50h 0 (Upper left), 1 (Lower right)
CINEMA MODE CINE 43h 49h 4Eh 45h 0 (OFF), 1(AUTO)
VIDEO SIGNAL VS 56h 53h 0 (AUTO), 1 (NTSC), 2 (PAL), 3 (SECAM) ,
4 (4.43NTSC), 5 (PAL-M), 6 (PAL-N), 7 (PAL-60)
SETUP STU 53h 54h 55h 0 (AUTO), 1 (OFF), 2 (3.75%), 3 (7.5%)
SCART INPUT SRT 53h 52h 54h 0 (OFF), 1 (ON)
Sending commands Status code from Description
from the PC, etc. the projector
30 30 76 49 0D Command for checking the input terminal
'0' '0' 'v' 'I' ' '
30 30 76 49 76 31 0D Check result ( VIDEO)
'0' '0' 'v' 'I' 'v' '1' ' '
The PC sends the command without attaching the data code to it. On the other hand, the projector attaches to the
received command it’s current operating status as the data code and send it back to the PC. (LAMP OPERATING
TIME: “h” and “m” represent hour and minute respectively. )
[Example ] When checking the currently selected input terminal (when the INPUT VIDEO is being selected) :
10
) Reading command diagram
The projectors operating status, such as POWER-ON / OFF, the currently selected input terminal and lamp
operating time, etc. can be monitored.
