Mitsubishi MELSEC-F FX2N-1RM-E-SET Manuale utente

USER’S MANUAL

FX2N-1RM-E-SET PROGRAMMABLE CAM SWITCH

FX2N-1RM-E-SET

Foreword

• This manual contains text, diagrams and explanations which will guide the reader in the

correct installation and operation of the Programmable Cam Switch FX2N-1RM-E-SET. It

should be read and understood before attempting to install or use the unit.

• For handling of the FX2N/FX2NC Series PLC main unit and FX2N Series extension blocks as

well as details of instructions, refer to the corresponding Hardware manuals and

programming manuals offered separately.

• If in doubt at any stage of the installation of Programmable Cam Switch FX2N-1RM-E-SET

always consult a professional electrical engineer who is qualified and trained to the local

and national standards that applies to the installation site.

• If in doubt about the operation or use of Programmable Cam Switch FX2N-1RM-E-SET

please consult the nearest Mitsubishi Electric distributor.

• This manual is subject to change without notice.

FX2N-1RM-E-SET Programmable Cam Switch

Programmable Cam Switch

FX2N-1RM-E-SET

USER’S MANUAL

Manual number : JY992D71101

Manual revision : F

Date : April 2003

FX2N-1RM-E-SET Programmable Cam Switch

MS,MS-DOS and Windows are registered trademarks of Microsoft Corporation.

IBM and AT are registered trademarks of International Business Machines Corporation.

All other brand and product names are trademarks or registered trademarks of

theirrespective owners.

iii

FX2N-1RM-E-SET Programmable Cam Switch

FAX BACK

Mitsubishi has a world wide reputation for its efforts in continually developing and pushing back

the frontiers of industrial automation. What is sometimes overlooked by the user is the care and

attention to detail that is taken with the documentation. However, to continue this process of

improvement, the comments of the Mitsubishi users are always welcomed. This page has been

designed for you, the reader, to fill in your comments and fax them back to us. We look forward to

hearing from you.

Fax numbers: Your name: ..................................................

Mitsubishi Electric.... ....................................................................

America (01) 847-478-2253 Your company:.............................................

Australia (02) 638-7072 ....................................................................

Germany (0 21 02) 4 86-1 12 Your location:...............................................

Spain (34) 93-589-1579 ....................................................................

United Kingdom (01707) 278-695

Please tick the box of your choice

What condition did the manual arrive in? !Good !Minor damage !Unusable

Will you be using a folder to store the manual? !Ye s !No

What do you think to the manual presentation?!Tidy !Unfriendly

Are the explanations understandable? !Ye s !Not too bad !Unusable

Which explanation was most difficult to understand: .................................................................

...................................................................................................................................................

Are there any diagrams which are not clear? !Ye s !No

If so,which: .................................................................................................................................

What do you think to the manual layout? !Good !Not too bad !Unhelpful

If there one thing you would like to see improved, what is it? ....................................................

...................................................................................................................................................

Could you find the information you required easily using the index and/or the contents, if possible

please identify your experience:.................................................................................................

...................................................................................................................................................

Do you have any comments in general about the Mitsubishi manuals? ....................................

...................................................................................................................................................

Thank you for taking the time to fill out this questionnaire. We hope you found both the product

and this manual easy to use.

FX2N-1RM-E-SET Programmable Cam Switch

Guidelines for the safety of the user and protection of the Programmable Cam

Switch FX2N-1RM-E-SET

This manual provides information for the use of the programmable cam switch FX2N-1RM-E-SET.

The manual has been written to be used by trained and competent personnel. The definition of

such a person or persons is as follows;

a) Any engineer who is responsible for the planning, design and construction of automatic

equipment using the product associated with this manual should be of a competent nature,

trained and qualified to the local and national standards required to fulfill that role. These

engineers should be fully aware of all aspects of safety with regards to automated

equipment.

b) Any commissioning or service engineer must be of a competent nature, trained and

qualified to the local and national standards required to fulfill that job. These engineers

should also be trained in the use and maintenance of the completed product. This includes

being completely familiar with all associated documentation for the said product. All

maintenance should be carried out in accordance with established safety practices.

c) All operators of the completed equipment (see Note) should be trained to use this product

in a safe manner in compliance to established safety practices. The operators should also

be familiar with documentation which is associated with the operation of the completed

equipment.

Note : Note: the term ‘completed equipment’ refers to a third party constructed device which

contains or uses the product associated with this manual.

Notes on the Symbols Used in this Manual

At various times throughout this manual certain symbols will be used to highlight points of

information which are intended to ensure the users personal safety and protect the integrity of

equipment. Whenever any of the following symbols are encountered its associated note must be

read and understood. Each of the symbols used will now be listed with a brief description of its

meaning.

Hardware Warnings

1) Indicates that the identified danger WILL cause physical and property damage.

2) Indicates that the identified danger could POSSIBLY cause physical and property

damage.

3) Indicates a point of further interest or further explanation.

Software Warnings

4) Indicates special care must be taken when using this element of software.

5) Indicates a special point which the user of the associate software element should be

aware of.

6) Indicates a point of interest or further explanation.

FX2N-1RM-E-SET Programmable Cam Switch

• Under no circumstances will Mitsubishi Electric be liable responsible for any consequential

damage that may arise as a result of the installation or use of this equipment.

• All examples and diagrams shown in this manual are intended only as an aid to understanding

the text, not to guarantee operation. Mitsubishi Electric will accept no responsibility for actual

use of the product based on these illustrative examples.

• Please contact a Mitsubishi Electric distributor for more information concerning applications in

life critical situations or high reliability.

FX2N-1RM-E-SET Programmable Cam Switch Contents

vii

1. Introduction .......................................................................................... 1-1

1.1 Outline of the product .........................................................................................1-1

1.2 Features .............................................................................................................1-1

1.3 Product configuration .........................................................................................1-3

1.4 Outside dimensions and name of each part ......................................................1-3

1.5 System configuration ..........................................................................................1-5

1.5.1 Connecting the FX2N-1RM to PLC ....................................................................................... 1-5

1.5.2 Using the FX2N-1RM individually ......................................................................................... 1-7

1.5.3 CC-Link connection ............................................................................................................... 1-8

1.5.4 Resolver and connection cable ........................................................................................... 1-10

1.5.5 Connecting the peripheral equipment ................................................................................. 1-11

1.5.6 Cautions on use of a personal computer and the FX-20P-E .............................................. 1-14

2. Installation ............................................................................................ 2-1

2.1 Installation method .............................................................................................2-1

2.2 Wiring .................................................................................................................2-1

2.3 Installing the resolver .........................................................................................2-2

3. Specifications ....................................................................................... 3-1

3.1 Environmental specifications .............................................................................3-2

3.2 Performance specifications ...............................................................................3-3

3.3 Resolver specifications .....................................................................................3-3

3.4 Power supply specifications ..............................................................................3-4

3.5 Input specifications ............................................................................................3-4

4. External Wiring ..................................................................................... 4-1

4.1 Wiring of the power supply and the input ...........................................................4-1

5. Extension Block Specifications and External Wiring ............................ 5-1

5.1 Extension block specifications (transistor output type) .....................................5-1

5.2 Output wiring (transistor output type) ................................................................5-1

6. Basic Setting ........................................................................................ 6-1

6.1 Handling of the RUN and PRG modes ...............................................................6-2

6.2 Specifying the bank ............................................................................................6-3

6.3 Automatic angle advance function .....................................................................6-4

6.4 Individual automatic angle advance function .....................................................6-6

6.5 Setting the reference angle ................................................................................6-9

6.6 Handling the keyword .......................................................................................6-10

6.7 Current angle transfer function .........................................................................6-11

7. BFM Assignment .................................................................................. 7-1

7.1 BFM list .............................................................................................................7-1

7.2 Description on BFM ............................................................................................7-4

7.3 Cautions on creation of a sequence program ..................................................7-11

7.4 Program example .............................................................................................7-12

7.4.1 Program example which uses FROM/TO instruction .......................................................... 7-12

7.4.2 Program example which uses indirect specification (BFM #100 to #105) .......................... 7-13

Contents

viii

FX2N-1RM-E-SET Programmable Cam Switch

8. Program Operating Procedures ...........................................................8-1

8.1 Functions offered by the data setting panel ....................................................... 8-1

8.2 Basic operating procedures ............................................................................... 8-3

8.2.1 Common items ......................................................................................................................8-3

8.2.2 Read ...................................................................................................................................... 8-3

8.2.3 Write and modification............................................................................................................ 8-4

8.2.4 Insertion .................................................................................................................................8-5

8.2.5 Deletion.................................................................................................................................. 8-6

8.2.6 Copy....................................................................................................................................... 8-8

8.2.7 Write and modification of teaching ......................................................................................... 8-9

8.2.8 Insertion of teaching.............................................................................................................8-10

8.2.9 Changing over the mode between RUN and PRG ..............................................................8-11

8.2.10 Reading/setting the reference angle ..................................................................................8-12

8.3 Application operating procedures .................................................................... 8-13

8.3.1 Specifying the resolution [FNC0]..........................................................................................8-13

8.3.2 Specifying the rotation direction of the resolver [FNC1].......................................................8-13

8.3.3 Write-protect function of the EEPROM [FNC2] ....................................................................8-14

8.3.4 Bank specification method [FNC3].......................................................................................8-14

8.3.5 Setting the automatic angle advance function [FNC4, 13 to 26].......................................... 8-15

8.3.6 Individual automatic angle advance function [FNC5,90] .....................................................8-17

8.3.7 Prohibition of RUN to PRG operation [FNC6] .....................................................................8-21

8.3.8 Current angle transfer function [FNC7] ................................................................................8-21

8.3.9 Inverting the output pattern [FNC50]....................................................................................8-22

8.3.10 Batch addition/subtraction of the output set angle [FNC60, 61].........................................8-23

8.3.11 Batch addition/subtraction of the ON output set angle[FNC62, 63] ...................................8-24

8.3.12 Batch addition/subtraction of the OFF output set angle [FNC64, 65] ................................8-25

8.3.13 Outputting the BCD current angle [FNC70, 71]..................................................................8-26

8.3.14 Outputting the pulse string [FNC72, 73].............................................................................8-27

8.3.15 RUN output [FNC74].......................................................................................................... 8-28

8.3.16 Outputting the one-phase pulse string [FNC75].................................................................8-28

8.3.17 Confirming and deleting the setting....................................................................................8-29

8.3.18 Prohibiting write to the EEPROM and preventing theft of a program ................................8-30

9. Monitor .................................................................................................9-1

9.1 Changing over the monitor display ..................................................................... 9-1

10. Test .................................................................................................. 10-1

10.1 Operating procedure of the test mode ........................................................... 10-1

11. Diagnostics .......................................................................................11-1

11.1 Indication and causes of errors ...................................................................... 11-1

Appendix ................................................................................................ A-1

Indice

Altri manuali Mitsubishi Interruttore

Mitsubishi

Mitsubishi NZ2EHG-T8 Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente