Mobatime Flex Manuale utente
© MOBATIME
Installation Manual
Flex Indoor Clock, single- or double-sided, without illumination
Before installation of the clock please read the manual carefully.
1. Notes to this Installation manual
The information in this installation manual can be changed at any time without previous notice.
This installation manual has been composed with utmost care, in order to explain all details in respect of
the operation of the product. Should you, nevertheless, have questions or discover errors in this Manual,
please contact us.
We do not answer for direct or indirect damages, which could occur through incorrect use of this manual.
Please read the instructions carefully before setting-up of the product. Use the product only once you
have correctly understood all information for the installation and of the operation.
The installation must only be carried out by a skilled person.
It is prohibited to reproduce, to store in a computer system or to transfer this publication in a way or
another, even part of it. The copyright remains with all the rights with MOSER-BAER AG –CH 3454
Sumiswald / Switzerland and BÜRK MOBATIME GmbH, D-78026 VS-Schwenningen / Germany.
.
2. Handling instructions
The clock must be transported upright in its original packaging and has to be stored dry.
Clean the cover glass with wet (leather-) cloth.
Never use solvents, aerosol or organic cleaning products.
The housing can be cleaned with standard cleaning agents.
3. Electrical connections
The mains supply line may only be installed by a licenced electrician.
The nationally valid installation regulations must be complied with.
The clock does contain a plug-in terminal, which serves as an all wires disconnecting device. In the on-
site supply line for movement, a fuse according to the consumption is to provide.
Maximum wire cross section of 2.5 mm² shall be used.
For all maintenance and cabling work, the clock has to be separated from the mains power supply.
© MOBATIME
}
}
4. Overview clock wiring
230VAC (only movements with power-supply)
Movement 2 (only double-sided clocks)
Signal LED movement 1
Signal LED movement 2
The internal wiring must not be modified.
5. Mounting
The connection plate and the WTD receiver can be fastened with Velcro on the dial or directly on the wall
behind the clock. See the drawing above.
Connect plate and signal cable according to the installation instruction. Connect the cables with the
movement and hang up the clock on the fixing screw.
Time signal
230 V AC
Movement 2
Movement 1
Movement 2
Movement 1
Mains connection
Time signal input
Only used for GPS
or WTD-reception
Shining only with DCF or GPS signal
}
Fixing screw
Mains
© MOBATIME
6. Customer connections
Mains connection
A cable attachment for power supply is provided inside the clock. Protected earth has to be
connected to the labelled grounding bolt (PE).
For phase and neutral wires a grey four-pin terminal is available. Dismantle the insulation of
the connecting wires to a length of 8 to 9 mm. Insert the wires up to the isolation in to the
spring terminal and clamp them be using a screwdriver No. 0 for opening the spring contact.
Phase and neutral wires must be kept together close to the terminal, using cable ties.
Detail of mains connection on mounting plate:
Time signal connection
A cable attachment for time signal is provided inside the clock. Dismantle the insulation of the
connecting wires to a length of 9 to 10 mm. Insert the wires up to the isolation in to the orange
spring terminal and clamp them be using the contact pusher.
Signal Movement code Type of movement
DCF R00…R04 BU 190…
GPS R60…R63 BU 190…
Time signal (autonomous operation with a DCF antenna)
Time signal (autonomous operation with a GPS antenna)
Power supply 230 V; 50/60 Hz; 250 mA
Movement
Connection DCF/MSF-
Antenna
DCF–time signal (1 and 2)
Connection GPS-Antenna
(DCF) time signal (1 and 2)
Supply (3 and 4)
brown
white
brown
white
UTC
MEZ
green
yellow
yellow
green
All jumpers
removed
All jumpers
removed
© MOBATIME TE-801238.01
WTD
868-RM
24VDC
MOBALine B
MOBALine A
Time signal (autonomous operation with a WTD-receiver)
No time signal via cable required for this clock. It is synchronized from a
WTD 868-T transmitter via a radio receiver interface WTD 868-RM.
For the different clock types, the WTD receiver interface must be mounted
according to the following description. See also the drawing Pt.5 on page 2.
Clock type: FL0.50. with housing type .00. (FLEX standard) and .01. (stainless steel V2A)
The WTD receiver interface can be mounted inside or outside of the clock.
Clock type: FL0.50. with housing type .02. (steam resistant) and .03. (ball throw resistant),
FL0.60. and FL0.80.(all housing types)
The WTD receiver interface must be mounted outside of the clock.
Signal Movement code Type of movement
WTD 868-RM R87…R90 SAM/SEM 100…
BÜRK MOBATIME GmbH
Postfach 3760, D-78026 VS-Schwenningen
Steinkirchring 46, D-78056 VS-Schwenningen
Tel. +49 7720 8535 0 / Fax +49 7720 8535 11
buerk@buerk-mobatime.de / www.buerk-mobatime.de
MOBATIME AG
Stettbachstrasse 5, CH-8600 Dübendorf
Tel. +41 44 802 75 75 / Fax +41 44 802 75 65
info-d@mobatime.ch / www.mobatime.ch
MOSER-BAER SA EXPORT DIVISION
19 ch. du Champ-des-Filles, CH-1228 Plan-les-Ouates
Tel. +41 22 884 96 11 / Fax + 41 22 884 96 90
export@mobatime.com / www.mobatime.com
MOSER-BAER AG
Spitalstrasse 7, CH-3454 Sumiswald
Tel. +41 34 432 46 46 / Fax +41 34 432 46 99
moserbaer@mobatime.com / www.mobatime.com
SALES SWITZERLAND
HEADQUARTERS / PRODUCTION SALES WORLDWIDE
SALES GERMANY, AUSTRIA
MOBATIME SA
En Budron H 20, CH-1052 Le Mont-sur-Lausanne
Tél. +41 21 654 33 50 / Fax +41 21 654 33 69
info-f@mobatime.ch / www.mobatime.ch
Connection WTD-receiver
(MBL) time signal (1 and 2)
Supply (3+ and 4-)
All jumpers
mounted
green
yellow
brown
white
Indice
Altri manuali Mobatime Orologio
Mobatime
Mobatime SEW 30 Manuale utente
Mobatime
Mobatime Metroline Manuale utente
Mobatime
Mobatime ECO-DC Manuale utente
Mobatime
Mobatime BU 190t 230 Manuale utente
Mobatime
Mobatime MOBALine TREND Manuale utente
Mobatime
Mobatime PROFILINE round Guida
Mobatime
Mobatime TREND NTP Series Manuale utente
Mobatime
Mobatime ECO-M-DC Series Manuale utente
Mobatime
Mobatime Mini Master clock HN 60 Manuale utente
Mobatime
Mobatime MOBALINE Cristalys Date Manuale utente
Mobatime
Mobatime DTS 4801.masterclock Manuale utente
Mobatime
Mobatime ECO-M-DK Manuale utente
Mobatime
Mobatime PROFILINE Series Manuale utente
Mobatime
Mobatime DSC. 250.4 Manuale utente
Mobatime
Mobatime MOBALine SEM 100 Manuale utente
Mobatime
Mobatime MOBALine SEM 40 V2 Manuale utente
Mobatime
Mobatime DK series Manuale utente
Mobatime
Mobatime SLH-DC series Manuale utente
Mobatime
Mobatime EuroTime Center ETC Manuale del proprietario
Mobatime
Mobatime SLH-DC series Manuale utente
