MobiPrint MP-T7BT Manuale utente
R
MobiPrint MPT7BT
Portable Dot Matrix Printer
User’s Manual
（VER1.2）
Content
NOTICE...................................................................................................................................................5
Notice of Safety.......................................................................................................................................... 5
Notice of Using...........................................................................................................................................5
Notice of Storing.........................................................................................................................................5
Chapter 1 Appearance and Model No............................................................................................................ 6
1.1 Outer Appearance............................................................................................................................. 6
1.2 Model No....................................................................................................................................... 7
Chapter 2 Characteristic Specification........................................................................................................... 7
2.1 Printing Specification.........................................................................................................................7
2.2 Other Specification............................................................................................................................8
Chapter 3 Operation Method......................................................................................................................9
3.1 Using Preparation........................................................................................................................ 9
3.1.1 Battery Installation.............................................................................................................. 9
3.1.2 Paper Roll Installation..............................................................................................................10
3.2Basic function usage......................................................................................................................... 11
3.2.1 Switch On............................................................................................................................ 11
3.2.2 Switch Off............................................................................................................................11
3.2.3 Paper Feeding (Manual Feeding)................................................................................................. 11
3.2.4 Self-Test.............................................................................................................................. 12
3.2.5 Hexadecimal Printing.............................................................................................................. 12
3.2.6 Printer Parameters Setting......................................................................................................... 13
3.2.7 Battery Charging.................................................................................................................... 13
3.3 Printer Parameters Setting................................................................................................................. 14
3.4 Printer Interface Connection and Printing............................................................................................... 14
3.4.1 USB Connection.................................................................................................................... 14
3.4.2 Bluetooth Connection.............................................................................................................. 14
3.4.3 Function of Bluetooth Address Binding......................................................................................... 15
3.4.4 Radio Frequency Connection..................................................................................................... 16
3.5 Indicator and Buzzer........................................................................................................................16
3.6 LCD Indicator................................................................................................................................18
4.1 Command Programming Manual......................................................................................................... 21
4.2 Description of Black Mark Pre-print..................................................................................................... 21
APPENDIX.............................................................................................................................................22
NOTICE
Please read this manual carefully before using the printer!
Notice of Safety
Be sure to use the specified battery and power supply provided by our company. Otherwise it
may cause fire, explosion or damage printer, meanwhile, the battery also may be damaged.
Don’t put battery into the fire, don’t disassemble or heat the battery, don’t be short circuit, it
may cause fire, explosion or damage printer, meanwhile, the battery also may be damaged.
If the printer would not be used for a long time, be sure to take off the battery, otherwise the
battery may leak liquid which is corrosive liquid, if improper operation causes battery leak
liquid, and it paste in the skin or clothes, please rinse it by clean water, if paste in the eyes,
please rinse them thoroughly by clean water and see a doctor. Please do not open the paper
case cover when it is printing or just when printing is finished, do not touch the printer head
with hand or body, overheat may cause scald.
Notice of Using
Water or other liquid should not be spilled into the printer, also the printer should not be
appeared in the rain, or else may cause printer damage. Please do not open the paper case
cover when it is printing, otherwise the printer may work improperly. If printer is using USB
connection to work, should not unplug the USB cable, or else some printing data may be lost.
When printer is using USB connection to work, the distance of communication should be
within 10 meters, otherwise the printer doesn’t print or prints rubbish codes. Too high
（45℃）or too low（5℃） environment temperature and too high (85％) or too low (20％)
environment humidity both effect the printing quality. The printer paper roll with poor
quality or stored for too long time also may reduce the printing quality even damage the
printer. Under the black mark detecting mode, the printer requires that the pre-printed black
mark is accordant with the printing rule of black mark (please refer to details in Chapter 4.2),
otherwise the black mark can not be detected correctly. Be sure to use up the power of the
battery before charge up it,as it can ensure the using life of the battery.
Notice of Storing
The printer should be placed in such an environment that the temperature is between-20℃
and 70℃, and the relative humidity is between 10% and 95%. If the printer will be stored for
a long time, please be sure to take out the battery, otherwise may damage the battery and
printer.
Chapter 1 Appearance and Model No.
1.1 Outer Appearance
[CHARGE]: Battery Charging Indicator [ERROR]: Error Indicator
[FEED]: Feed Button [MODE]: Mode Button
1.2 Model No.
SP-T7 Support USB Interface
SP-T7BT Support USB and Bluetooth Interface
SP-T7RF Support USB and RF Interface
Chapter 2 Characteristic Specification
2.1 Printing Specification
Print
Printing Method Dot matrix
Printing Speed 80mm/s
Resolution 5 点/mm（127dpi）
Effective Printing Width 48mm；
Character
Character Set
GB18030and BIG5（16*16和12*12）（chinese），ASCII
（8*16and6*12）；
ASCII、Codepage and International character sets
（7*9）（English
Printing Font ANK: 12 x 24Chinese: 24 x 24
Character per Line 240 点
Paper Spec
Paper Type Thermal paper
Paper Width 57.5±0.5mm；
Paper Roll Diameter Max: 40.0mm
Roll Core Inner Diameter 13mm(min.)
Paper Thickness 0.06 to 0.085mm
Paper Supply Method Drop-in easy loading
Reliability
MCBF 15 million lines
TPH 100km
Barcodes
EAN-13,EAN-8,UPC-A,UPC-E,CODE39,CODE93,CODE128
CODABAR,INTERLEAVED25
Emulation ESC/POS
Driver Windows 98 / 2000 / NT / XP / VISTA/Win7/windows Mobile /windows CE
Sensor Paper End Sensor
Interface SP-T7-BT:USB,Bluetooth;SP-T7U:USB
Power Adaptor 9V DC/2A
Battery Power 7.4V DC, 1.5A rechargeable Li-ion battery
Battery duration 120m continuous printing
Physical Weight 260g(excluding roll paper)
Dimension(W×L×H) 103×99×46mm
Color Beige/Black
Environment Operating Temp 0℃~50℃
Storage Temp -40℃~70℃
Operating Humidity 10%~80%
Storage Humidity 10%~95%
2.2 Other Specification
●Paper Loading Method: drop-in easy loading ( please refer to details in 3.1.2 Paper Roll
Installation).
●Black Mark Location: available(details please see 4.2
pre-printing black mark manual).
●Paper End Detection: when paper is out, the ERROR
Indicator will constant on lighting, The buzzer rings when it is printing, and
it will stop printing.
●Printing Control Command: ESC/POS compatible command set
(refer to<T7 Printer Developer Manual >).
●Power Supply: 7.4VDC/1500mAh rechargeable polymer lithium battery.
●Power Alarm: when the battery is low, the battery indicator blinks
●Battery Charging: quick charging ,it will be charged full about 3 hours;
●Battery Duration: under25% printing density ,at least 120 meters, the standby time is
over 100 hours.
These parameters are just for reference, long term usage will cause the capacity decline, and
can not ensure the time of printing.
Chapter 3 Operation Method
3.1 Using Preparation
3.1.1 Battery Installation
1. Put the battery into the battery slot.
2. Install the battery cover.
3.1.2 Paper Roll Installation
1. Hold both sides of the paper case cover, and open it.
2. Pay attention to use paper that effective printing side is outside in the printing paper face
when you enchase the new paper roll.
3. Pull out a part of paper and put them in the middle of the paper out orifice.
4. Shut down paper case cover and cut off the redundant paper
3.2Basic function usage
3.2.1 Switch On
Press【POWER】button, the power indicator is on, about 1 second later you will hear ‘one low
one high ’prompt tone. The printer will turn into work mode when loosen the【POWER】button.
The LCD screen show operating parameters of printer
3.2.2 Switch Off
Under status of switch on ,the printer will send out the prompt tone of ‘one low one high ’
after pressed the【POWER】button for 1 second, the power indicator go out, then loosen the
【POWER】button, the printer is off.
3.2.3 Paper Feeding (Manual Feeding)
Under the normal work status, press 【FEED】button, the paper feeding begins, and stop
when loosen 【FEED】button. When the printer works in black mark mode, press【FEED】
button, the printer begins to feed paper and stops over the position of black mark. If the paper
is not the black mark paper, the printer stops automatically after feeds paper for 30cm.Being
out of paper，insert paper into paper port ，the printer stops automatically after feeds paper
for 10 cm
3.2.4 Self-Test
After receiving the printer, user can check its current setting and status at anytime. Self-test
way is as below: Power off, then hold down the 【FEED】button and press the power button
at the same time. Then loosen the【FEED】button when you hear ‘one low one high ’prompt
tone, the current setting and status will be printed out.
3.2.5 Hexadecimal Printing
The function of hexadecimal printing is to print the information received from host machine
by hexadecimal numbers and corresponding characters. It will be convenient to debug
application.
Into hexadecimal printing: Power off, hold down the【MODE】button and press the power
button at the same time. Then loosen the power button and press the【FEED】button when you
hear ‘one low one high’ prompt tone of power on. After that you may loosen the 【MODE】
button and 【FEED】button. The printer turns into the hexadecimal printing mode and print
the presentation.
Indice
Altri manuali MobiPrint Stampante
