Mohawk USL-600 Guida

USL-6000 CYLINDER REPLACEMENT PROCEDURE:

FILE: USL-CYL.DOC

REVISION: 6/30/98

TOOLS NEEDED:

•CROW BAR

•C-CLAMP

•¼” ALLEN WRENCH

•11/16” WRENCH OR CRESENT WRENCH

•MALLET

•PAPER TOWELS OR RAGS

•-6 JIC CAP NUTS

1. RAISE LIFT MID TO FULL HEIGHT ABOVE 6TH OR 7TH LOCK POSITION.

2. LOWER LIFT ONTO MECHANICAL LOCKS (ON 6TH OR 7TH LOCK POSITION). SECURE

DOWN HANDLE AT POWER UNIT IN LOWERING POSITION. (SEE BELOW)

3. PLACE CLAMP AROUND SIDE SUPPORT ARMS AS SHOWN. ENSURE THAT CLAMP IS

SNUG.

4. DISCONNECT HYDRAULIC LINE AT BOTTOM OF CYLINDER ROD.

5. CAP VELOCITY FUSE AT END OF CYLINDER ROD LOOSELY.

6. REMOVE SET SCREW AT END OF CYLINDER ROD.

7. PLACE RAGS OR PAPER TOWELD UNDER ROD END ON FLOOR.

8. USE CROW BAR TO PRY PIN OUT OF END OF SUPPORT PLATE AT CYLINDER ROD END.

(A SOCKET MAY BE HELPFUL TO SHIM THE PIN OUT OF THE HOLE).

9. ONCE PIN IS PUSHED ASIDE, PRY END OF ROD OUT UNTIL PIN CLEARS SIDE PLATE.

WARNING: ROD END WILL TRY TO FLIP UP. KEEP FIRM GRIP ON ROD END

DURING THIS STEP. SEE PICTURE BELOW.

10. ONCE ROD IS FREE OF MAIN TUBE, PIVOT CYLINDER SO ROD IS POINTING UP. SEE

BELOW.

11. HOLD CYLINDER FIRMLY AND PRESS SIDE SUPPORT ARMS AWAY FROM CYLINDER

(ENSURE THAT C-CLAMP IS STILL SECURE). REMOVE CYLINDER. SEE BELOW.

12. INSTALL NEW CYLINDER BY REVERSING STEPS.

NOTE: NEW CLYINDER WILL HAVE RETRACTED ROD. WAIT UNTIL CYLINDER IS

PLACED BETWEEN SIDE SUPPORT ARMS. THEN PIVOT CYLINDER, LOOSED FITTING

ON END OF ROD. PULL OUT ROD TO SECURE ROD END PIN TO MAIN TUBE AT

BOTTOM OF LIFT. ALWAYS BLEED SYSTEM AFTER REPLACING/REPAIRING

CYLINDER.

-END OF DOCUMENT -

Indice

Altri manuali Mohawk Sistema di sollevamento

Mohawk

Mohawk ML-220 Manuale utente

Mohawk

Mohawk IA Manuale utente

Mohawk

Mohawk TR-25A Manuale utente

Mohawk

Mohawk TP-18 Manuale utente

Mohawk

Mohawk TD-1000-AH Manuale utente

Mohawk

Mohawk LMF-12 Manuale utente

Mohawk

Mohawk A-7 Manuale utente

Mohawk

Mohawk V-035-A-X Manuale utente

Mohawk

Mohawk TR-33 Manuale utente

Mohawk

Mohawk TL-7 Manuale utente

Mohawk

Mohawk TP-20 Manuale utente

Mohawk

Mohawk V-085-C-X Manuale utente

Mohawk

Mohawk TP-15 Manuale utente

Mohawk

Mohawk TR-110 Manuale utente

Mohawk

Mohawk MP-18-24VDC Series Manuale utente

Manuali Sistema di sollevamento popolari di altre marche

morse

morse 82H-124 Manuale utente

Braun

Braun NL955 Series Manuale utente

haacon

haacon 1889.10 Manuale utente

Protekt

Protekt AT 252 Manuale utente

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 Manuale utente

Nova Technology International, LLC

Nova Technology International, LLC NAS Series Manuale utente

Genie

Genie Z-60/34 Manuale utente

Screen Technics

Screen Technics INTERFIT Vertical Up Lift Manuale utente

Mortuary Lift

Mortuary Lift ULTIMATE 1000 Manuale utente

Custom Equipment

Custom Equipment Hy-Brid 3 Series Manuale di programmazione

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Manuale di programmazione

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 Manuale di programmazione

BERG

BERG BeNomic EasyLeaf Manuale utente

Powermate

Powermate LiftGate LG-3 Manuale utente

Snorkel

Snorkel TM12 Series Manuale utente

Terberg

Terberg OMNIDEKA Manuale utente

Harmar Mobility

Harmar Mobility AL625 Istruzioni operative

Rotary

Rotary SPO16 Manuale utente