Molbio Truelab Duo Manuale utente
Truelab™
micro PCR Printer
User Manual
603050001
REF
Truelab™ Printer
TM
Printing with the Truelab Real Time micro PCR Analyzer
Feed
Mode
Charging (Yellow)
COMM
MSR/SMR
Front Side View Back Side View
Radial Cover
Low Battery (Red)
Error
Power ON
RS 232 port Battery cover
USB interface
Charger port
1
Thermal line printer method
56.5 mm
0.125 mm x 0.12 mm
75mm/s (higher speed optional)
High speed 75mm/s
1.5Ahr Li-ion battery
charger: 9V, 2A battery charger
light. Power ON is indicated by blue light.
2
120.5 mm
84 mm
50.5 mm
92
60
The power button is on the bottom right hand side of the printer. Blue light glows when the
printer is switched on.
For taking the sample print press mode button a sample print will be generated. Press the
feed button to scroll the paper.
Charging in progress is indicated by yellow light. Low battery and Error is indicated by red
o
at temperatures 45 C may lead to incomplete charging and reduced operating time per charge.
9V DC 2A
75
left
TM
PRINTING WITH TRUELAB REAL TIME MICRO PCR ANALYZER
Ensure the printer is switched on. Switch on the bluetooth of PCR analyzer, Pair the analyzer
with the printer(Password is '1234'). Once the device is paired go to the results page and print
the result.
For Charging the lithium ion battery pack. Connect the Charging jack of the adapter to the
printer, Charging in progress is indicated by yellow light. Battery has to be charged for 4 to
6 hours. Battery charging should be performed away from potential heat sources. Charging
Registered Office:
H.No.13, Sagar Society, Dona Paula
Panaji, North Goa, Goa - 403 722, India.
www.molbiodiagnostics.com
Manufacturing Unit:
Plot Nos. M-46/47, Phase III B,
Verna Industrial Estate, Verna,
Goa - 403 722, India.
Email: sales@molbiodiagnostics.com
MB/TP/03-18/VER-2
Altri manuali per Truelab Duo
1
Altri manuali Molbio Stampante
