Molex 19294-0008 Manuale utente

Manual Crimping Tool

Doc No: ATS-192940008 Release Date: 09-22-09 UNCONTROLLED COPY age 1 of 2

Revision: A Revision Date: 09-22-09

HAMMER

Figure 3

WIRE

AWG

MARKINGS

Figure 2

STRIPPED

WIRE

CENTER BARREL

OVER NEST

Ma ual Crimpi g Tool

Specificatio Sheet

Order No. 19294-0008

E gi eeri g No. - SKT-840

FEATURES

 Compact and easy to use

 Inexpensive for lower volume production or field repairs

 Designed to crimp closed barrel terminals

DESCRIPTION:

This Manual Tool is used for crimping non-insulated 8AWG thru 4/0 closed barrel terminals. This tool can be used

with a hammer or vise. This tool is not UL listed with any Molex products.

OPERATION

WARNING: Make sure that the wire or cable is Disconnected from a y power source.

1. osition the Manual Crimping Tool on a solid surface with the base down.

2. lace a thumb on the tool body behind the ram.

3. Use an index finger under the lift lever and push up. See Figure 1.

4. Insert the desired terminal or splice in the nest making sure the crimp

barrel is centered.

5. For butt splices, center half of the barrel into the nest.

6. Release the lift lever, allowing the ram to contact the terminal or splice.

7. Insert the proper stripped wire into the barrel of the terminal. See Figure 2.

Figure 1

LIFT LEVER

RAM

Manual Crimping Tool

Doc No: ATS-192940008 Release Date: 09-22-09 UNCONTROLLED COPY age 2 of 2

Revision: A Revision Date: 09-22-09

Risk of flyi g debris.

Risk of eye i jury.

Wear safety glasses whe

usi g this tool.

8. Using a 2lb hammer strike the top of the ram until the lift lever is

lined up with the correct AWG marking located on the side of the

tool. See Figure 3.

9. Lift the ram by pulling up on the lift lever and removing the crimped

assembly. For butt splices repeat this procedure on the opposite

side of the barrel. See Figure 4.

Mai te a ce

It is recommended that each operator of the tool be made aware of,

and responsible for, the following maintenance steps:

1. Remove dust, moisture, and other debris with a clean brush, or

soft, lint free cloth.

2. Do not use any abrasive materials that could damage the tool.

3. Make certain all movable parts such as ram is oiled regularly. Light oil (such as SAE30W oil) should be used.

4. When the tool is not in use, store it in a clean, dry area.

Warra ty

All tools are warranted to be free of manufacturing defects for a period of 30 days. Should such a defect occur, the

tool will be exchanged free of charge. This exchange will not be applicable to altered, misused, or damaged tools.

This tool is designed for hand use only.

Americas Headquarters

Lisle, Illinois 60532 U.S.A.

1-800-78MOLEX

[email protected]

Far East North Headquarters

Yamato, Kanagawa, Japan

81-462-65-2324

[email protected]

Far East South Headquarters

Jurong, Singapore

65-6-268-6868

[email protected]

Europea Headquarters

Munich, Germany

49-89-413092-0

[email protected]

Corporate Headquarters

2222 Wellington Ct.

Lisle, IL 60532 U.S.A.

630-969-4550

Fax: 630-969-1352

Visit our Web site at http://www.molex.com

Figure

LIFT

LEVER

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali molex Utensili per crimpatura

molex

molex ServiceGrade 64016-0038 Manuale utente

molex

molex 63825-1900 Manuale utente

molex

molex 207128 Series Manuale utente

molex

molex 207129 Series Manuale utente

molex

molex 207129 Series Manuale utente

molex

molex 64001-8800 Manuale utente

molex

molex 63819-1300 Manuale utente

molex

molex 207129 Series Manuale utente

molex

molex 207129 Series Manuale utente

molex

molex 207129 Series Manuale utente

molex

molex 207129 Series Manuale utente

molex

molex 207129 Series Manuale per l'uso e la cura

molex

molex 63811-8900 Manuale utente

molex

molex 63816-0200 Manuale utente

molex

molex 63825-3000 Manuale utente

molex

molex 63811-1500 Manuale utente

molex

molex Avikrimp AT 5762 Manuale utente

molex

molex 50837 Manuale utente

molex

molex 207129 Series Manuale utente

molex

molex 207129 Series Manuale utente

molex

molex 207129 Series Manuale utente

molex

molex PremiumGrade Series Manuale utente

molex

molex 63823-8000 Manuale utente

molex

molex 207129 Series Manuale utente

Manuali Utensili per crimpatura popolari di altre marche

Panduit

Panduit CT-1000 Guida per l'amministratore

JST

JST CS 10 Manuale utente

Danfoss

Danfoss ET4200 Manuale utente

Tyco Electronics

Tyco Electronics PRO-CRIMPER III Manuale utente

TE Connectivity

TE Connectivity 2063528-1 Manuale utente

Tyco Electronics

Tyco Electronics 69156-1 Manuale utente

CRH

CRH CRL CBLHCT1 Manuale utente

Emerson

Emerson Klauke ES 105CFM Manuale utente

KIMBALL MIDWEST

KIMBALL MIDWEST 27-798 Manuale di istruzioni

Danfoss

Danfoss ET4350 Manuale utente

Milwaukee

Milwaukee M18 Manuale utente

HOGERT

HOGERT HT1P169 Manuale utente

Textron

Textron ESG105L Manuale utente

Tyco Electronics

Tyco Electronics 90035-3 Manuale utente

Emerson

Emerson Klauke ES 20RMCCFB Manuale utente

Continental Refrigerator

Continental Refrigerator PC150HD Manuale utente

TE Connectivity

TE Connectivity ERGOCRIMP 1-1579001-3 Manuale utente

Tyco Electronics

Tyco Electronics CERTI-CRIMP 90418-1 Manuale utente

molex 19294-0008 Manuale utente

Manuali Utensili per crimpatura popolari di altre marche